Juniper Networks
Monthly
Denial-of-service in Juniper Networks Junos OS on EX Series switches (EX2300, EX3400, EX4000, EX4100, EX4400) lets a low-privileged authenticated attacker crash the Flexible PIC Concentrator (FPC) by subscribing over gRPC to an unsupported telemetry sensor path in the packet forwarding engine. Each crash produces a complete forwarding outage until the module auto-restarts, and the trigger can be repeated for sustained disruption. There is no public exploit identified at time of analysis and the issue is not listed in CISA KEV, but the low complexity and single low-privilege prerequisite make it operationally easy to trigger.
Denial-of-service in Juniper Networks Junos OS on SRX Series devices lets an unauthenticated, network-based attacker exhaust the packet forwarding engine (PFE) by exploiting a race condition in stateful flow teardown. When the race is hit, a flow's timeout is mis-set to a very high value (>10,000s instead of 3s), so sessions are never reaped, invalidated sessions accumulate without bound, and the device eventually stops forwarding or hits a flowd core and reboots. There is no public exploit identified at time of analysis and it is not listed in CISA KEV; exploitation is probabilistic because the triggering conditions are outside the attacker's control.
Denial-of-service in Juniper Junos OS on EX4100 and EX4400 Series switches allows an unauthenticated adjacent attacker to exhaust packet-forwarding-engine memory and crash the Flexible PIC Concentrator (FPC). The flaw triggers only when sFlow monitoring is enabled in a Virtual Chassis and multicast traffic ingresses on one VC member and egresses on another, causing a slow buffer leak that culminates in an FPC crash and restart. There is no public exploit identified at time of analysis and it is not listed in CISA KEV, but the low attack complexity and lack of authentication make it a credible availability risk for affected deployments.
Denial-of-service in Juniper Networks Junos OS on MX Series (with SPC3) and SRX Series devices allows an unauthenticated, network-based attacker to crash the flow processing daemon (flowd) by sending a malformed SIP INVITE packet when the SIP Application Layer Gateway (ALG) is enabled. The crash forces a flowd restart, producing a complete traffic-forwarding outage until the device auto-recovers, and can be repeated to sustain the outage. No public exploit identified at time of analysis; not listed in CISA KEV, and no EPSS score was provided.
Remote denial of service in Juniper Networks Junos OS on MX Series (with SPC3) and SRX Series firewalls lets an unauthenticated network attacker crash the flow processing daemon (flowd) by sending a single TCP packet with a malformed TCP header when the TCP proxy is active. Because TCP proxy is engaged whenever ALGs, Advanced Anti-Malware, ICAP, or UTM services inspect a flow, exploitation forces a complete traffic-forwarding outage until the daemon auto-restarts. No public exploit identified at time of analysis and the issue is not listed in CISA KEV, but the low attack complexity and lack of authentication make it a credible availability threat to perimeter devices.
Denial-of-service in the Packet Forwarding Engine (PFE) of Juniper Junos OS on MX (with SPC3) and SRX-series firewalls lets an unauthenticated, network-based attacker crash and restart the PFE, dropping all traffic-forwarding services until automatic recovery. Exploitation is indirect: the attacker must lure or wait for the affected device to initiate an outbound TCP connection to an attacker-controlled system, which then replies with a crafted packet that trips an unhandled exceptional condition (CWE-754). Juniper-reported with CVSS 4.0 8.2; no public exploit identified at time of analysis and it is not in CISA KEV.
Denial-of-service in Juniper Networks Junos OS on QFX10000 Series switches allows an unauthenticated, adjacent (Layer 2) attacker to saturate data-center links by injecting IPv6 multicast traffic in an EVPN-VxLAN fabric. When such packets reach a non-IRB interface of a spine switch, the packet-forwarding engine floods them to other spines and all ESI leaf switches, creating an endless forwarding loop that starves legitimate traffic. No public exploit identified at time of analysis and it is not listed in CISA KEV; the vendor-assigned CVSS 4.0 base score is 7.1.
Denial-of-service in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on MX Series routers lets an unauthenticated, Layer-2 adjacent attacker crash a line card by sending a single crafted packet within the same broadcast domain. The affected system miscalculates the packet size (CWE-1284, improper validation of specified quantity in input), which fails downstream processing and raises an MQSS major CMError that forces an automatic FPC reset, interrupting all traffic on that FPC until it recovers. Only deployments handling MAP-T or non-IP-over-IP traffic (e.g. MPLS over GRE) are exposed; there is no public exploit identified at time of analysis and it is not listed in CISA KEV.
Certificate chain validation bypass in Juniper Junos OS J-Web on SRX Series enables person-in-the-middle attackers to intercept Security Director cloud communications, exposing credentials and sensitive data. All SRX devices connecting to SD cloud fail to properly verify server certificates, allowing interception of authentication material and configuration data. Affects Junos OS versions across all branches prior to 22.4R3-S9, 23.2R2-S6, 23.4R2-S7, 24.2R2-S3, 24.4R2-S2, and 25.2R1-S2/25.2R2. No public exploit identified at time of analysis. Network-positioned attacker with high complexity required (CVSS AC:H).
Memory exhaustion in Juniper Networks Junos OS BroadBand Edge subscriber management daemon (bbe-smgd) on MX Series allows adjacent unauthenticated attackers to trigger persistent denial of service by sending authentication packets that do not match configured packet-type options. Each mismatched packet leaks memory, eventually consuming all available daemon heap memory and preventing new subscriber logins. Authentication packet-type configuration must be active for exploitation. No public exploit identified at time of analysis.
Memory leak in Juniper Networks Junos OS jdhcpd daemon enables adjacent unauthenticated attackers to crash DHCP services on MX Series routers. Each DHCPv6 subscriber logout in PPPoE or VLAN configurations with active/bulk lease query leaks memory, eventually exhausting resources and triggering jdhcpd crash. Service remains unavailable until process restart completes. Affects all Junos OS versions before 22.4R3-S1, 23.2 versions before 23.2R2, and 23.4 versions before 23.4R2. No public exploit identified at time of analysis.
Memory leak in Juniper Networks l2ald daemon allows adjacent attackers to crash Layer 2 services on EVPN-MPLS networks. Affects Junos OS and Junos OS Evolved across multiple versions. Unauthenticated attackers on the same network segment can trigger resource exhaustion by causing ESI route churn from multi-homed Provider Edge devices, forcing l2ald process crash and restart. No public exploit identified at time of analysis, but exploitation requires only network adjacency without authentication.
Symbolic link manipulation in Juniper Networks Junos OS CLI enables authenticated local attackers with low privileges to escalate to root access. Exploitation requires two users: the first performs a 'file link ...' CLI operation, then after the second user commits unrelated configuration changes, the first user can authenticate as root, achieving full system compromise. Affects Junos OS versions across 23.2, 23.4, 24.2, 24.4, and 25.2 release trains prior to specified patch levels. No public exploit identified at time of analysis.
Local privilege escalation in Juniper Networks Junos OS Evolved on PTX Series routers allows authenticated users with low privileges to gain high-privileged direct access to Flexible PIC Concentrators (FPCs), enabling potential full compromise of affected line cards. Impacts PTX10004, PTX10008, PTX10016 with JNP10K-LC1201 or JNP10K-LC1202 line cards across multiple firmware branches. Missing authentication on critical FPC management functions permits unauthorized privilege elevation. No public exploit identified at time of analysis.
Management daemon deadlock in Juniper Networks Junos OS 23.4-24.4 and Junos OS Evolved enables network-based authenticated attackers to trigger complete management plane denial-of-service via rapid NETCONF session cycling. Vulnerability causes mgd processes to hang in lockf state, exhausting process pool and preventing administrative logins. Recovery requires device power-cycle. Affects deployments using NETCONF management interface with authenticated remote users. No public exploit identified at time of analysis.
Command injection in Juniper Networks Support Insights Virtual Lightweight Collector (JSI vLWC) CLI enables local high-privileged attackers to escalate privileges to root. Inadequate input validation in the CLI menu permits shell command injection, with injected commands executing at root level. All JSI vLWC versions before 3.0.94 affected. CVSS 8.4 (High severity, local vector). Requires high-level existing privileges (PR:H). No public exploit identified at time of analysis.
Local privilege escalation in Juniper Networks Junos OS and Junos OS Evolved allows low-privileged authenticated users to execute arbitrary code with root privileges. When unsigned Python operation scripts are enabled in device configuration, attackers can inject and execute malicious op scripts under root-equivalent context, achieving complete system compromise. Affects all Junos OS versions before 22.4R3-S7 and multiple branches through 24.4, plus corresponding Junos OS Evolved releases. No public exploit identified at time of analysis. CVSS 8.5 (High) with local attack vector requiring low privileges and no user interaction.
Web filtering bypass on Juniper Networks Junos OS MX Series exposes downstream resources to unauthenticated network attackers by allowing a specially formatted URL to evade the URL filtering plugin. The flaw stems from incorrect name or reference resolution (CWE-706), causing the router to forward traffic that security policy mandates be dropped. No public exploit has been identified at time of analysis, but the CVSS 4.0 score of 6.9 carries an Automatable:Yes modifier, indicating the bypass is scriptable at scale against any qualifying deployment.
Ingress firewall filter bypass in Juniper Networks Junos OS on MX Series hardware (MPC10/11, LC4800/9600/4802, MX304) allows adjacent subscribers on static interfaces to evade configured protocol-level access controls and upstream bandwidth limitations. The Packet Forwarding Engine (PFE) fails to enforce ingress filters for these subscriber configurations, meaning neither protocol restrictions nor rate-limiting policies take effect. No public exploit code has been identified and the vulnerability is absent from CISA KEV, though the CVSS 4.0 AU:Y (Automatable) supplemental metric indicates exploitation could be scripted at scale against affected broadband aggregation deployments.
Traffic forwarding on Juniper QFX Series switches running Junos OS Evolved can be fully disrupted by an adjacent, unauthenticated attacker exploiting a race condition in the sFlow collector handler. When sFlow collector reachability changes trigger a next-hop entry update concurrently with the sFlow thread reading that same next-hop data, the evo-pfemand process crashes and all packet forwarding halts until the process automatically restarts. No public exploit code exists and this vulnerability is not listed in the CISA KEV catalog at time of analysis, but the availability impact is severe for any network segment relying on the affected switch.
License exhaustion in Juniper Networks Junos OS Evolved lets an unauthenticated, network-based attacker reach the device's license-management process, which was intended to be internal-only but is exposed on an open network port due to incorrect initialization. All Junos OS Evolved releases before 23.2R2-EVO are affected. There is no public exploit identified at time of analysis and it is not listed in CISA KEV, but the low attack complexity and lack of authentication make it a credible network-facing denial-of-service risk to affected routing/switching platforms.
Denial-of-service in Juniper Networks Junos OS and Junos OS Evolved on EX Series, QFX Series, and MX Series allows a local, low-privileged attacker to crash the l2ald (Layer 2 Address Learning Daemon) by issuing a specific 'show l2-learning' CLI command, disrupting all Layer 2 services until the process automatically restarts. The root cause is a Return of Pointer Value Outside of Expected Range flaw (CWE-466) in the fileio library. No public exploit has been identified at time of analysis, and active exploitation has not been confirmed by CISA or the vendor.
Repeated IKE negotiation failures on Juniper Junos OS (MX with SPC3 and SRX Series) cause a peer index rollover that assigns duplicate index values to new peers, triggering continuous iked process crashes and a full VPN service outage requiring system reboot. Unauthenticated network-based attackers can deliberately flood the device with failing VPN negotiations to accelerate the rollover condition. No public exploit code or CISA KEV listing exists at time of analysis, but the network-reachable, zero-privilege attack vector makes this a meaningful risk for any organization relying on Juniper-based VPN infrastructure with iked enabled.
Out-of-bounds write in the Juniper Networks Junos OS http-gatekeeper (http-gk) process on SRX Series firewalls crashes the process when handling crafted network requests, taking down all web-management-dependent services including J-Web, remote-access VPN, and firewall authentication until automatic process recovery. Exploitation is gated on a specific non-default configuration - remote-access VPN with pre-logon compliance check enabled - limiting the exposed population to SRX deployments that actively use this feature. No public exploit code and no CISA KEV listing have been identified at time of analysis, and the official CVSS 5.3 score reflects the limited, reversible availability-only impact.
Junos OS Evolved exposes an internal communication process to the network via an unintended open port due to incorrect initialization, enabling unauthenticated remote attackers to interact with a service never designed for external access. Affected Juniper devices suffer limited information disclosure and elevated CPU consumption as the misbound process handles unsolicited ingress packets - a soft availability degradation rather than a crash. No public exploit has been identified at time of analysis and the vulnerability is not listed in CISA KEV, but the unauthenticated network vector across a broad version range warrants prompt patching on internet-facing routing infrastructure.
Junos OS on Juniper EX Series access switches exposes a missing authorization flaw in the CLI that allows any locally authenticated user, regardless of privilege class or assigned permissions, to execute a specific privileged 'request' command and cause complete traffic disruption on the affected switch. Affected platforms span EX2300, EX4000, EX4100, EX4300-MP, and EX4400 across six active Junos OS release trains from 23.2 through 25.4. No public exploit has been identified at time of analysis and the system recovers automatically, but the low barrier to exploitation - any authenticated local user qualifies - makes this a meaningful insider threat in shared-access or multi-tenant switch environments.
Packet forwarding engine (pfe) in Juniper Networks Junos OS on EX4100, EX4400, EX4650, and QFX5120 devices fails to correctly initialize egress filters on IRB and physical interfaces, allowing unauthenticated network-based attackers to bypass security policies and cause integrity impact by forwarding traffic that should be blocked. The vulnerability affects Junos OS versions 23.4R2-S6 and 24.2R2-S3. EPSS score of 6.9 reflects moderate exploitation probability; no active exploitation confirmed (non-KEV status).
Denial of service in Juniper Junos OS chassis control daemon (chassisd) on SRX1600, SRX2300, and SRX4300 devices allows local attackers with low privileges to trigger a complete crash via a specific 'show chassis' CLI command, causing temporary traffic disruption until module recovery. Junos OS 24.4 versions before 24.4R1-S3 and 24.4R2 are affected; no public exploit code identified at time of analysis.
Stored cross-site scripting (XSS) in Juniper Networks Junos Space allows unauthenticated remote attackers to inject malicious script tags into the list filter field, which execute with the permissions of any user who views the affected page, including administrators. All versions before 24.1R5 Patch V3 are vulnerable. No public exploit code or active exploitation has been identified at time of analysis.
Unauthenticated buffer overflow in Juniper Networks Junos OS Evolved advanced forwarding toolkit (evo-aftmand/evo-pfemand) permits adjacent attackers to crash PTX Series and QFX5000 Series devices via crafted multicast packets. Exploitation triggers line card or device restart, sustaining denial of service under continuous attack. Affects multiple Junos OS Evolved release branches before patched versions. No public exploit identified at time of analysis. Attack requires adjacent network access but no authentication, making exploitation feasible in shared network segments.
Privilege escalation in Juniper Networks Junos OS allows high-privileged local attackers to gain root access on Linux-based line cards running Junos OS Evolved. Missing authentication in critical command processing functions enables authenticated administrators with elevated privileges to bypass access controls and execute commands as root on affected hardware modules including MPC7-11, LC2101/2103, LC480/4800/9600, MX304 built-in FPC, MX-SPC3, SRX5K-SPC3, EX9200-40XS, and PTX-series line cards. No public exploit identified at time of analysis.
Denial-of-service in Juniper Networks Junos OS on EX Series switches (EX2300, EX3400, EX4000, EX4100, EX4400) lets a low-privileged authenticated attacker crash the Flexible PIC Concentrator (FPC) by subscribing over gRPC to an unsupported telemetry sensor path in the packet forwarding engine. Each crash produces a complete forwarding outage until the module auto-restarts, and the trigger can be repeated for sustained disruption. There is no public exploit identified at time of analysis and the issue is not listed in CISA KEV, but the low complexity and single low-privilege prerequisite make it operationally easy to trigger.
Denial-of-service in Juniper Networks Junos OS on SRX Series devices lets an unauthenticated, network-based attacker exhaust the packet forwarding engine (PFE) by exploiting a race condition in stateful flow teardown. When the race is hit, a flow's timeout is mis-set to a very high value (>10,000s instead of 3s), so sessions are never reaped, invalidated sessions accumulate without bound, and the device eventually stops forwarding or hits a flowd core and reboots. There is no public exploit identified at time of analysis and it is not listed in CISA KEV; exploitation is probabilistic because the triggering conditions are outside the attacker's control.
Denial-of-service in Juniper Junos OS on EX4100 and EX4400 Series switches allows an unauthenticated adjacent attacker to exhaust packet-forwarding-engine memory and crash the Flexible PIC Concentrator (FPC). The flaw triggers only when sFlow monitoring is enabled in a Virtual Chassis and multicast traffic ingresses on one VC member and egresses on another, causing a slow buffer leak that culminates in an FPC crash and restart. There is no public exploit identified at time of analysis and it is not listed in CISA KEV, but the low attack complexity and lack of authentication make it a credible availability risk for affected deployments.
Denial-of-service in Juniper Networks Junos OS on MX Series (with SPC3) and SRX Series devices allows an unauthenticated, network-based attacker to crash the flow processing daemon (flowd) by sending a malformed SIP INVITE packet when the SIP Application Layer Gateway (ALG) is enabled. The crash forces a flowd restart, producing a complete traffic-forwarding outage until the device auto-recovers, and can be repeated to sustain the outage. No public exploit identified at time of analysis; not listed in CISA KEV, and no EPSS score was provided.
Remote denial of service in Juniper Networks Junos OS on MX Series (with SPC3) and SRX Series firewalls lets an unauthenticated network attacker crash the flow processing daemon (flowd) by sending a single TCP packet with a malformed TCP header when the TCP proxy is active. Because TCP proxy is engaged whenever ALGs, Advanced Anti-Malware, ICAP, or UTM services inspect a flow, exploitation forces a complete traffic-forwarding outage until the daemon auto-restarts. No public exploit identified at time of analysis and the issue is not listed in CISA KEV, but the low attack complexity and lack of authentication make it a credible availability threat to perimeter devices.
Denial-of-service in the Packet Forwarding Engine (PFE) of Juniper Junos OS on MX (with SPC3) and SRX-series firewalls lets an unauthenticated, network-based attacker crash and restart the PFE, dropping all traffic-forwarding services until automatic recovery. Exploitation is indirect: the attacker must lure or wait for the affected device to initiate an outbound TCP connection to an attacker-controlled system, which then replies with a crafted packet that trips an unhandled exceptional condition (CWE-754). Juniper-reported with CVSS 4.0 8.2; no public exploit identified at time of analysis and it is not in CISA KEV.
Denial-of-service in Juniper Networks Junos OS on QFX10000 Series switches allows an unauthenticated, adjacent (Layer 2) attacker to saturate data-center links by injecting IPv6 multicast traffic in an EVPN-VxLAN fabric. When such packets reach a non-IRB interface of a spine switch, the packet-forwarding engine floods them to other spines and all ESI leaf switches, creating an endless forwarding loop that starves legitimate traffic. No public exploit identified at time of analysis and it is not listed in CISA KEV; the vendor-assigned CVSS 4.0 base score is 7.1.
Denial-of-service in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on MX Series routers lets an unauthenticated, Layer-2 adjacent attacker crash a line card by sending a single crafted packet within the same broadcast domain. The affected system miscalculates the packet size (CWE-1284, improper validation of specified quantity in input), which fails downstream processing and raises an MQSS major CMError that forces an automatic FPC reset, interrupting all traffic on that FPC until it recovers. Only deployments handling MAP-T or non-IP-over-IP traffic (e.g. MPLS over GRE) are exposed; there is no public exploit identified at time of analysis and it is not listed in CISA KEV.
Certificate chain validation bypass in Juniper Junos OS J-Web on SRX Series enables person-in-the-middle attackers to intercept Security Director cloud communications, exposing credentials and sensitive data. All SRX devices connecting to SD cloud fail to properly verify server certificates, allowing interception of authentication material and configuration data. Affects Junos OS versions across all branches prior to 22.4R3-S9, 23.2R2-S6, 23.4R2-S7, 24.2R2-S3, 24.4R2-S2, and 25.2R1-S2/25.2R2. No public exploit identified at time of analysis. Network-positioned attacker with high complexity required (CVSS AC:H).
Memory exhaustion in Juniper Networks Junos OS BroadBand Edge subscriber management daemon (bbe-smgd) on MX Series allows adjacent unauthenticated attackers to trigger persistent denial of service by sending authentication packets that do not match configured packet-type options. Each mismatched packet leaks memory, eventually consuming all available daemon heap memory and preventing new subscriber logins. Authentication packet-type configuration must be active for exploitation. No public exploit identified at time of analysis.
Memory leak in Juniper Networks Junos OS jdhcpd daemon enables adjacent unauthenticated attackers to crash DHCP services on MX Series routers. Each DHCPv6 subscriber logout in PPPoE or VLAN configurations with active/bulk lease query leaks memory, eventually exhausting resources and triggering jdhcpd crash. Service remains unavailable until process restart completes. Affects all Junos OS versions before 22.4R3-S1, 23.2 versions before 23.2R2, and 23.4 versions before 23.4R2. No public exploit identified at time of analysis.
Memory leak in Juniper Networks l2ald daemon allows adjacent attackers to crash Layer 2 services on EVPN-MPLS networks. Affects Junos OS and Junos OS Evolved across multiple versions. Unauthenticated attackers on the same network segment can trigger resource exhaustion by causing ESI route churn from multi-homed Provider Edge devices, forcing l2ald process crash and restart. No public exploit identified at time of analysis, but exploitation requires only network adjacency without authentication.
Symbolic link manipulation in Juniper Networks Junos OS CLI enables authenticated local attackers with low privileges to escalate to root access. Exploitation requires two users: the first performs a 'file link ...' CLI operation, then after the second user commits unrelated configuration changes, the first user can authenticate as root, achieving full system compromise. Affects Junos OS versions across 23.2, 23.4, 24.2, 24.4, and 25.2 release trains prior to specified patch levels. No public exploit identified at time of analysis.
Local privilege escalation in Juniper Networks Junos OS Evolved on PTX Series routers allows authenticated users with low privileges to gain high-privileged direct access to Flexible PIC Concentrators (FPCs), enabling potential full compromise of affected line cards. Impacts PTX10004, PTX10008, PTX10016 with JNP10K-LC1201 or JNP10K-LC1202 line cards across multiple firmware branches. Missing authentication on critical FPC management functions permits unauthorized privilege elevation. No public exploit identified at time of analysis.
Management daemon deadlock in Juniper Networks Junos OS 23.4-24.4 and Junos OS Evolved enables network-based authenticated attackers to trigger complete management plane denial-of-service via rapid NETCONF session cycling. Vulnerability causes mgd processes to hang in lockf state, exhausting process pool and preventing administrative logins. Recovery requires device power-cycle. Affects deployments using NETCONF management interface with authenticated remote users. No public exploit identified at time of analysis.
Command injection in Juniper Networks Support Insights Virtual Lightweight Collector (JSI vLWC) CLI enables local high-privileged attackers to escalate privileges to root. Inadequate input validation in the CLI menu permits shell command injection, with injected commands executing at root level. All JSI vLWC versions before 3.0.94 affected. CVSS 8.4 (High severity, local vector). Requires high-level existing privileges (PR:H). No public exploit identified at time of analysis.
Local privilege escalation in Juniper Networks Junos OS and Junos OS Evolved allows low-privileged authenticated users to execute arbitrary code with root privileges. When unsigned Python operation scripts are enabled in device configuration, attackers can inject and execute malicious op scripts under root-equivalent context, achieving complete system compromise. Affects all Junos OS versions before 22.4R3-S7 and multiple branches through 24.4, plus corresponding Junos OS Evolved releases. No public exploit identified at time of analysis. CVSS 8.5 (High) with local attack vector requiring low privileges and no user interaction.
Web filtering bypass on Juniper Networks Junos OS MX Series exposes downstream resources to unauthenticated network attackers by allowing a specially formatted URL to evade the URL filtering plugin. The flaw stems from incorrect name or reference resolution (CWE-706), causing the router to forward traffic that security policy mandates be dropped. No public exploit has been identified at time of analysis, but the CVSS 4.0 score of 6.9 carries an Automatable:Yes modifier, indicating the bypass is scriptable at scale against any qualifying deployment.
Ingress firewall filter bypass in Juniper Networks Junos OS on MX Series hardware (MPC10/11, LC4800/9600/4802, MX304) allows adjacent subscribers on static interfaces to evade configured protocol-level access controls and upstream bandwidth limitations. The Packet Forwarding Engine (PFE) fails to enforce ingress filters for these subscriber configurations, meaning neither protocol restrictions nor rate-limiting policies take effect. No public exploit code has been identified and the vulnerability is absent from CISA KEV, though the CVSS 4.0 AU:Y (Automatable) supplemental metric indicates exploitation could be scripted at scale against affected broadband aggregation deployments.
Traffic forwarding on Juniper QFX Series switches running Junos OS Evolved can be fully disrupted by an adjacent, unauthenticated attacker exploiting a race condition in the sFlow collector handler. When sFlow collector reachability changes trigger a next-hop entry update concurrently with the sFlow thread reading that same next-hop data, the evo-pfemand process crashes and all packet forwarding halts until the process automatically restarts. No public exploit code exists and this vulnerability is not listed in the CISA KEV catalog at time of analysis, but the availability impact is severe for any network segment relying on the affected switch.
License exhaustion in Juniper Networks Junos OS Evolved lets an unauthenticated, network-based attacker reach the device's license-management process, which was intended to be internal-only but is exposed on an open network port due to incorrect initialization. All Junos OS Evolved releases before 23.2R2-EVO are affected. There is no public exploit identified at time of analysis and it is not listed in CISA KEV, but the low attack complexity and lack of authentication make it a credible network-facing denial-of-service risk to affected routing/switching platforms.
Denial-of-service in Juniper Networks Junos OS and Junos OS Evolved on EX Series, QFX Series, and MX Series allows a local, low-privileged attacker to crash the l2ald (Layer 2 Address Learning Daemon) by issuing a specific 'show l2-learning' CLI command, disrupting all Layer 2 services until the process automatically restarts. The root cause is a Return of Pointer Value Outside of Expected Range flaw (CWE-466) in the fileio library. No public exploit has been identified at time of analysis, and active exploitation has not been confirmed by CISA or the vendor.
Repeated IKE negotiation failures on Juniper Junos OS (MX with SPC3 and SRX Series) cause a peer index rollover that assigns duplicate index values to new peers, triggering continuous iked process crashes and a full VPN service outage requiring system reboot. Unauthenticated network-based attackers can deliberately flood the device with failing VPN negotiations to accelerate the rollover condition. No public exploit code or CISA KEV listing exists at time of analysis, but the network-reachable, zero-privilege attack vector makes this a meaningful risk for any organization relying on Juniper-based VPN infrastructure with iked enabled.
Out-of-bounds write in the Juniper Networks Junos OS http-gatekeeper (http-gk) process on SRX Series firewalls crashes the process when handling crafted network requests, taking down all web-management-dependent services including J-Web, remote-access VPN, and firewall authentication until automatic process recovery. Exploitation is gated on a specific non-default configuration - remote-access VPN with pre-logon compliance check enabled - limiting the exposed population to SRX deployments that actively use this feature. No public exploit code and no CISA KEV listing have been identified at time of analysis, and the official CVSS 5.3 score reflects the limited, reversible availability-only impact.
Junos OS Evolved exposes an internal communication process to the network via an unintended open port due to incorrect initialization, enabling unauthenticated remote attackers to interact with a service never designed for external access. Affected Juniper devices suffer limited information disclosure and elevated CPU consumption as the misbound process handles unsolicited ingress packets - a soft availability degradation rather than a crash. No public exploit has been identified at time of analysis and the vulnerability is not listed in CISA KEV, but the unauthenticated network vector across a broad version range warrants prompt patching on internet-facing routing infrastructure.
Junos OS on Juniper EX Series access switches exposes a missing authorization flaw in the CLI that allows any locally authenticated user, regardless of privilege class or assigned permissions, to execute a specific privileged 'request' command and cause complete traffic disruption on the affected switch. Affected platforms span EX2300, EX4000, EX4100, EX4300-MP, and EX4400 across six active Junos OS release trains from 23.2 through 25.4. No public exploit has been identified at time of analysis and the system recovers automatically, but the low barrier to exploitation - any authenticated local user qualifies - makes this a meaningful insider threat in shared-access or multi-tenant switch environments.
Packet forwarding engine (pfe) in Juniper Networks Junos OS on EX4100, EX4400, EX4650, and QFX5120 devices fails to correctly initialize egress filters on IRB and physical interfaces, allowing unauthenticated network-based attackers to bypass security policies and cause integrity impact by forwarding traffic that should be blocked. The vulnerability affects Junos OS versions 23.4R2-S6 and 24.2R2-S3. EPSS score of 6.9 reflects moderate exploitation probability; no active exploitation confirmed (non-KEV status).
Denial of service in Juniper Junos OS chassis control daemon (chassisd) on SRX1600, SRX2300, and SRX4300 devices allows local attackers with low privileges to trigger a complete crash via a specific 'show chassis' CLI command, causing temporary traffic disruption until module recovery. Junos OS 24.4 versions before 24.4R1-S3 and 24.4R2 are affected; no public exploit code identified at time of analysis.
Stored cross-site scripting (XSS) in Juniper Networks Junos Space allows unauthenticated remote attackers to inject malicious script tags into the list filter field, which execute with the permissions of any user who views the affected page, including administrators. All versions before 24.1R5 Patch V3 are vulnerable. No public exploit code or active exploitation has been identified at time of analysis.
Unauthenticated buffer overflow in Juniper Networks Junos OS Evolved advanced forwarding toolkit (evo-aftmand/evo-pfemand) permits adjacent attackers to crash PTX Series and QFX5000 Series devices via crafted multicast packets. Exploitation triggers line card or device restart, sustaining denial of service under continuous attack. Affects multiple Junos OS Evolved release branches before patched versions. No public exploit identified at time of analysis. Attack requires adjacent network access but no authentication, making exploitation feasible in shared network segments.
Privilege escalation in Juniper Networks Junos OS allows high-privileged local attackers to gain root access on Linux-based line cards running Junos OS Evolved. Missing authentication in critical command processing functions enables authenticated administrators with elevated privileges to bypass access controls and execute commands as root on affected hardware modules including MPC7-11, LC2101/2103, LC480/4800/9600, MX304 built-in FPC, MX-SPC3, SRX5K-SPC3, EX9200-40XS, and PTX-series line cards. No public exploit identified at time of analysis.