Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessReach affected HPE interface over network
-
ExploitSend crafted unauthenticated request
-
ExecutionTrigger disclosure flaw across trust boundary
-
ImpactExfiltrate sensitive data
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A07:2025 - Authentication Failures
ASVS 5.0
V6 - Authentication Alternate path authentication
|
| Exploitation Conditions | The specific prerequisites (required feature, protocol, configuration mode, or affected service) are not described in the available sources, because no CVE description or advisory text was provided. Per the supplied CVSS vector (AV:N/AC:L/PR:N/UI:N), exploitation is network-based, low-complexity, and requires neither authentication nor user interaction, which would imply reachability of the affected HPE networking interface is the only gating factor; however this cannot be confirmed against a vendor description, and the exact affected product, versions, and whether default configurations are vulnerable remain unverified. Limiting factors therefore cannot be enumerated from the available data beyond network reachability to the affected component. |
| Impact | Signals are strongly divergent and partly unverifiable. The provided CVSS 3.1 vector (AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:N) scores 10.0 and describes a network-reachable, low-complexity, unauthenticated flaw with a changed scope and high confidentiality AND integrity impact - a textbook critical rating. The vuln.today decision label is 'act_now', which aligns with that severity and argues for urgent remediation. However, the only descriptive signal, the 'Information Disclosure' tag, implies a confidentiality-only issue, which conflicts with the I:H in the vector - this contradiction cannot be resolved without the vendor advisory text, which was not available. No description, CWE (N/A), EPSS score, SSVC automatable/technical-impact breakdown, or KEV listing was provided, and no PoC or exploit reference is present (the sole reference is the HPE bulletin itself). So there is no evidence of active exploitation and no exploitation-probability data to temper or confirm the high CVSS. Net: treat as a high-priority item consistent with the 'act_now' label and a 10.0 unauthenticated-remote vector, but verify the actual impact (pure disclosure vs. disclosure+integrity) and affected product/versions directly against HPE bulletin hpesbnw05162en_us before acting, because the impact metrics and the sole tag disagree. |
| Exploit ScenarioDerived | A remote attacker with network reach to the affected HPE networking product sends crafted traffic to the vulnerable interface and, without authentication or user interaction, obtains sensitive information that crosses a trust boundary (scope change). The precise trigger is not described in the available sources. No public exploit or PoC reference was provided, so exploitation would currently require attacker-developed tooling. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 22, 2026
Information disclosure in an unspecified HPE Networking product is tracked as CVE-2026-79844, but the supplied record contains no CVE description, CWE, CPE, or affected-version data, so the exact component at risk is unconfirmed. The independent assessment rates the issue as network-reachable, low-complexity, unauthenticated, and no-interaction, with high confidentiality impact and no integrity or availability impact; the source's 10.0 score is broader and is not adopted by that assessment. vuln.today assigns an act_now priority, while no CISA KEV status is present and no public exploit identified at time of analysis.
RemediationAI
No vendor-released patch identified at time of analysis, and no fixed version is supplied, so no validated upgrade target can be stated. Consult the HPE advisory at https://support.hpe.com/hpesc/public/docDisplay?docId=hpesbnw05162en_us&docLocale=en_US for the affected product list, exact fixed versions, and any vendor-stated workarounds before taking product-specific action. Because the affected component and trigger are unconfirmed, any compensating control beyond the vendor guidance would be speculative and could disrupt legitimate access without evidence that it addresses the flaw.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The available evidence identifies only an HPE security advisory reference and an 'Information Disclosure' tag; no CWE is mapped and no CPE strings are provided, so the underlying technology, protocol, or service boundary cannot be determined. The authoritative vector (AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) indicates a network-reachable, low-complexity, unauthenticated, no-interaction confidentiality-only issue, but the trigger is not described in the available sources and default-configuration exposure is unverified. The source-supplied 10.0 vector differs by including scope change and high integrity impact; those elements are not supported by the independent assessment and should not be assumed.
Know when Hpe gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:N
Provided vector gives AV:N/AC:L/PR:N/UI:N; the sole 'Information Disclosure' signal implies confidentiality-only (I:N/A:N) and no evidence supports a scope change, so S:U - diverging from the input's I:H/S:C.
Primary rating from Vendor (hpe).
CVSS VectorVendor: hpe
DescriptionCVE.org
No description provided
Executive ViewAI
A critical-severity information disclosure vulnerability has been reported in an unspecified HPE Networking product, potentially exposing sensitive data to unauthenticated remote attackers. Although the exact component and affected versions remain unconfirmed, the network-reachable nature and lack of required authentication raise significant concerns for organizational data confidentiality. Leadership should prioritize immediate validation and containment measures to mitigate potential exposure while vendor details are clarified.
No vendor-released patch identified at time of analysis. Interim mitigations include restricting network access to affected HPE Networking products through segmentation and firewall rules, enabling detailed logging and monitoring for unauthorized access, and applying vendor-recommended workarounds once available.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.
An unprivileged network attacker could gain system privileges to provisioned Intel manageability SKUs: Intel Active Mana
The read_mru_list function in NTP before 4.2.8p9 allows remote attackers to cause a denial of service (crash) via a craf
Default, hard-coded credentials shipped on several administrative and system accounts in HPE's Analytics and Location En
A directory traversal vulnerability in Hewlett Packard Enterprise Insight Remote Support may allow remote code execution
A potential security vulnerability has been identified in Hewlett Packard Enterprise OfficeConnect 1820, 1850, and 1920S
A security vulnerability in HPE Smart Update Manager (SUM) prior to version 8.5.6 could allow remote unauthorized access
A vulnerability in HPE Insight Remote Support (IRS) prior to v7.15.0.646 may allow an unauthenticated denial of service
NTP through 4.2.8p12 has a NULL Pointer Dereference. Rated high severity (CVSS 7.5), this vulnerability is remotely expl
A maximum-severity, network-reachable flaw (CVSS 3.1 base 10.0) in an as-yet-unnamed HPE product allows remote attackers
Unauthenticated network attackers can potentially achieve high confidentiality, integrity, and availability impact again
HPE security bulletin hpesbnw05162en_us documents a maximum-severity (CVSS 10.0) exposure in an HPE product that is not
HPE advisory hpesbnw05162en_us covers a product flaw carrying a CVSS 3.1 base score of 10.0 (AV:N/AC:L/PR:N/UI:N/S:C/C:H
EUVD-2026-108345
GHSA-5c4j-gp89-fj43
NVD
CVE.org
EPSS
Vulnrichment
VulDB
Exploit-DB