Skip to main content

HPE Networking CVE-2026-79844

| EUVDEUVD-2026-108345 CRITICAL
Authentication Bypass Using an Alternate Path or Channel (CWE-288)
2026-10-22 security-alert@hpe.com GHSA-5c4j-gp89-fj43
10.0
CVSS 3.1 · Vendor: hpe
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Reach affected HPE interface over network
  2. Exploit
    Send crafted unauthenticated request
  3. Execution
    Trigger disclosure flaw across trust boundary
  4. Impact
    Exfiltrate sensitive data

Vulnerability Assessment

Weakness
CWE
OWASP Top 10:2025
A07:2025 - Authentication Failures
ASVS 5.0
V6 - Authentication Alternate path authentication
Exploitation Conditions

The specific prerequisites (required feature, protocol, configuration mode, or affected service) are not described in the available sources, because no CVE description or advisory text was provided. Per the supplied CVSS vector (AV:N/AC:L/PR:N/UI:N), exploitation is network-based, low-complexity, and requires neither authentication nor user interaction, which would imply reachability of the affected HPE networking interface is the only gating factor; however this cannot be confirmed against a vendor description, and the exact affected product, versions, and whether default configurations are vulnerable remain unverified. Limiting factors therefore cannot be enumerated from the available data beyond network reachability to the affected component.

Impact

Signals are strongly divergent and partly unverifiable. The provided CVSS 3.1 vector (AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:N) scores 10.0 and describes a network-reachable, low-complexity, unauthenticated flaw with a changed scope and high confidentiality AND integrity impact - a textbook critical rating. The vuln.today decision label is 'act_now', which aligns with that severity and argues for urgent remediation. However, the only descriptive signal, the 'Information Disclosure' tag, implies a confidentiality-only issue, which conflicts with the I:H in the vector - this contradiction cannot be resolved without the vendor advisory text, which was not available. No description, CWE (N/A), EPSS score, SSVC automatable/technical-impact breakdown, or KEV listing was provided, and no PoC or exploit reference is present (the sole reference is the HPE bulletin itself). So there is no evidence of active exploitation and no exploitation-probability data to temper or confirm the high CVSS. Net: treat as a high-priority item consistent with the 'act_now' label and a 10.0 unauthenticated-remote vector, but verify the actual impact (pure disclosure vs. disclosure+integrity) and affected product/versions directly against HPE bulletin hpesbnw05162en_us before acting, because the impact metrics and the sole tag disagree.

Exploit ScenarioDerived

A remote attacker with network reach to the affected HPE networking product sends crafted traffic to the vulnerable interface and, without authentication or user interaction, obtains sensitive information that crosses a trust boundary (scope change). The precise trigger is not described in the available sources. No public exploit or PoC reference was provided, so exploitation would currently require attacker-developed tooling.

Act Now Prioritize within 24-48h. Why: CRITICAL severity.
No patch listed yet 0.4% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 22, 2026

Information disclosure in an unspecified HPE Networking product is tracked as CVE-2026-79844, but the supplied record contains no CVE description, CWE, CPE, or affected-version data, so the exact component at risk is unconfirmed. The independent assessment rates the issue as network-reachable, low-complexity, unauthenticated, and no-interaction, with high confidentiality impact and no integrity or availability impact; the source's 10.0 score is broader and is not adopted by that assessment. vuln.today assigns an act_now priority, while no CISA KEV status is present and no public exploit identified at time of analysis.

RemediationAI

No vendor-released patch identified at time of analysis, and no fixed version is supplied, so no validated upgrade target can be stated. Consult the HPE advisory at https://support.hpe.com/hpesc/public/docDisplay?docId=hpesbnw05162en_us&docLocale=en_US for the affected product list, exact fixed versions, and any vendor-stated workarounds before taking product-specific action. Because the affected component and trigger are unconfirmed, any compensating control beyond the vendor guidance would be speculative and could disrupt legitimate access without evidence that it addresses the flaw.

Affected VersionsENISA

Unknown product 10.6.0.0 ≤10.7.2.6
Unknown product 10.8.0.0 ≤10.8.1.1
Unknown product 10.3.0.0 ≤10.4.1.13

Affected Packages

euvd unknown_product no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

The available evidence identifies only an HPE security advisory reference and an 'Information Disclosure' tag; no CWE is mapped and no CPE strings are provided, so the underlying technology, protocol, or service boundary cannot be determined. The authoritative vector (AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) indicates a network-reachable, low-complexity, unauthenticated, no-interaction confidentiality-only issue, but the trigger is not described in the available sources and default-configuration exposure is unverified. The source-supplied 10.0 vector differs by including scope change and high integrity impact; those elements are not supported by the independent assessment and should not be assumed.

Know when Hpe gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (hpe) PRIMARY 10.0 CRITICAL
AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:N
ENISA EUVD HIGH
vuln.today AI 7.5 HIGH

Provided vector gives AV:N/AC:L/PR:N/UI:N; the sole 'Information Disclosure' signal implies confidentiality-only (I:N/A:N) and no evidence supports a scope change, so S:U - diverging from the input's I:H/S:C.

3.1 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N
4.0 AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:N/VA:N/SC:N/SI:N/SA:N

Primary rating from Vendor (hpe).

CVSS VectorVendor: hpe

Attack Vector
Network
Attack Complexity
Low
Privileges Required
None
User Interaction
None
Scope
Changed
Confidentiality
High
Integrity
High
Availability
None

DescriptionCVE.org

No description provided

Executive ViewAI

Why It Matters

A critical-severity information disclosure vulnerability has been reported in an unspecified HPE Networking product, potentially exposing sensitive data to unauthenticated remote attackers. Although the exact component and affected versions remain unconfirmed, the network-reachable nature and lack of required authentication raise significant concerns for organizational data confidentiality. Leadership should prioritize immediate validation and containment measures to mitigate potential exposure while vendor details are clarified.

Business Impact: High
Compensating Controls

No vendor-released patch identified at time of analysis. Interim mitigations include restricting network access to affected HPE Networking products through segmentation and firewall rules, enabling detailed logging and monitoring for unauthorized access, and applying vendor-recommended workarounds once available.

Threat Intelligence Overview

EPSS Score
0.4%
Top 67% exploitable
Prevalence
Medium
HPE networking security bulletin (doc prefix 'nw'); exact product and footprint unconfirmed
Threat Intel
1
1 source
Data Quality
7 sources
Confidence: High

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity CRITICAL
CISA KEV No
Public POC No
EPSS 0.4%
Patch available No
Active threat No
Deciding rule
CRITICAL severity
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision
Scheduled
Exploitation
None
System Exposure· derived
Open
Automatable
Yes
Human Impact
High
Technical Impact
Total

Priority Score

55
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +50
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: +5

Attack Technique

Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.

More in Hpe

View all
CVE-2017-5689 CRITICAL POC
9.8 May 02

An unprivileged network attacker could gain system privileges to provisioned Intel manageability SKUs: Intel Active Mana

CVE-2016-7434 HIGH POC
7.5 Jan 13

The read_mru_list function in NTP before 4.2.8p9 allows remote attackers to cause a denial of service (crash) via a craf

CVE-2026-76708 CRITICAL POC
9.8 Sep 22

Default, hard-coded credentials shipped on several administrative and system accounts in HPE's Analytics and Location En

CVE-2024-53676 CRITICAL POC
9.8 Nov 27

A directory traversal vulnerability in Hewlett Packard Enterprise Insight Remote Support may allow remote code execution

CVE-2022-37932 CRITICAL POC
9.8 Dec 12

A potential security vulnerability has been identified in Hewlett Packard Enterprise OfficeConnect 1820, 1850, and 1920S

CVE-2020-7136 CRITICAL POC
9.8 Apr 30

A security vulnerability in HPE Smart Update Manager (SUM) prior to version 8.5.6 could allow remote unauthorized access

CVE-2025-37097 HIGH POC
7.5 Jul 01

A vulnerability in HPE Insight Remote Support (IRS) prior to v7.15.0.646 may allow an unauthenticated denial of service

CVE-2019-8936 HIGH POC
7.5 May 15

NTP through 4.2.8p12 has a NULL Pointer Dereference. Rated high severity (CVSS 7.5), this vulnerability is remotely expl

CVE-2026-79849 CRITICAL
10.0 Oct 22

A maximum-severity, network-reachable flaw (CVSS 3.1 base 10.0) in an as-yet-unnamed HPE product allows remote attackers

CVE-2026-79848 CRITICAL
10.0 Oct 22

Unauthenticated network attackers can potentially achieve high confidentiality, integrity, and availability impact again

CVE-2026-79851 CRITICAL
10.0 Oct 22

HPE security bulletin hpesbnw05162en_us documents a maximum-severity (CVSS 10.0) exposure in an HPE product that is not

CVE-2026-79847 CRITICAL
10.0 Oct 22

HPE advisory hpesbnw05162en_us covers a product flaw carrying a CVSS 3.1 base score of 10.0 (AV:N/AC:L/PR:N/UI:N/S:C/C:H

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy