Skip to main content

Advantech ADAM-3600 EUVDEUVD-2026-104856

| CVE-2026-43855 HIGH
Heap-based Buffer Overflow (CWE-122)
2026-10-20 CSA GHSA-78gh-m293-pw3h
7.5
CVSS 4.0 · Vendor: CSA
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Authenticate with high privileges to ADAM-3600
  2. Delivery
    Send crafted oversized input
  3. Exploit
    Overflow heap buffer in handler
  4. Execution
    Execute arbitrary code on RTU
  5. Impact
    Full device compromise (C/I/A)

Vulnerability Assessment

Weakness
CWE
ASVS 5.0
V15 - Secure Coding and Architecture Heap buffer bounds checking
MITRE ATT&CK

1 technique across 1 tactic: Execution

The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up.

Exploitation Conditions

Exploitation requires an attacker to already hold high-privilege authenticated access to the Advantech ADAM-3600 RTU (CVSS PR:H), so this is a post-authentication flaw rather than a pre-auth network takeover. The CVSS AC:H rating indicates non-default or non-trivial conditions - likely heap state manipulation/grooming or a specific input path - must be met for the overflow to yield reliable code execution; no user interaction is needed (UI:N) and the vector is network-reachable (AV:N). Limiting factors for defenders: the required privileged credential foothold and the high exploitation complexity substantially narrow realistic attackers, and exact vulnerable firmware versions were not provided, so patch-level scoping must come from the Advantech advisory.

Impact

Signals are moderate and largely consistent toward a mid-tier priority rather than an emergency. The provided CVSS 4.0 vector (AV:N/AC:H/AT:N/PR:H/UI:N) scores 7.5 but embeds two meaningful dampeners: AC:H (high attack complexity, implying non-trivial conditions or a race/heap-grooming requirement) and PR:H (the attacker must already hold high-level authenticated/privileged access to the ADAM-3600). The upside for an attacker is the full VC:H/VI:H/VA:H impact triad - arbitrary code execution yielding complete confidentiality, integrity, and availability loss on the device. No EPSS score was provided, no CISA KEV listing is present, and no public proof-of-concept is referenced, so there is no public exploit identified at time of analysis. The combination of a required privileged foothold plus high complexity means this is a credible post-authentication RCE on an OT/RTU device but not a mass-exploitable, drive-by network flaw. Note a mild tension to verify: the description says 'remote authenticated attacker' yet provides no CWE and no technical detail on the vulnerable interface - the privileged-access and high-complexity assumptions are drawn from the CVSS vector only and should be confirmed against the Advantech advisory.

Exploit ScenarioDerived

An attacker who has already obtained authenticated, privileged access to an Advantech ADAM-3600 RTU (for example via stolen or default operator credentials on the device's management interface) sends crafted input that overflows a heap buffer in the handling routine. Because exploitation is rated high-complexity, the attacker must reliably groom the heap or meet specific conditions, after which they gain arbitrary code execution on the controller. No public proof-of-concept is referenced in the provided data.

This Week Schedule remediation this week. Why: HIGH severity (CVSS 7.0-8.9).
No patch listed yet 0.6% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 20, 2026

Heap-based buffer overflow in the Advantech ADAM-3600 remote terminal unit allows a network-reachable attacker who already holds high-privilege authenticated access to the device to corrupt heap memory and potentially achieve arbitrary code execution. The CVSS 4.0 vector (AV:N/AC:H/PR:H/UI:N, high confidentiality/integrity/availability impact) and the independent CVSS 3.1 assessment agree this is a post-authentication flaw requiring privileged credentials plus non-trivial heap grooming or a specific input path, so exploitation is not a trivial pre-auth network takeover. No public exploit code or CISA KEV entry is present in the available intelligence, and exploitation has not been confirmed in the wild; exact vulnerable firmware ranges are not specified in the input and must be scoped from the Advantech security advisory.

RemediationAI

No exact fixed firmware version is identified in the available data, so the primary action is to obtain the patch level from the Advantech security advisory (https://www.advantech.com/en/security-advisory) and the CSA alert AL-2026-149, then upgrade every ADAM-3600 unit to the vendor-designated fixed firmware; where patch data is unavailable, treat status as 'no vendor-released patch identified at time of analysis' rather than assuming no fix exists. In the interim, apply compensating controls matched to the PR:H/L AC:H profile: restrict network reachability to the RTU's administrative and protocol interfaces to a hardened management VLAN or jump host with allow-listed source addresses (reduces AV:N exposure but requires maintaining ACLs and can complicate legitimate HMI/SCADA polling), remove or disable unused services and default/high-privilege accounts and enforce strong unique credentials on remaining privileged accounts (since the flaw is post-authentication, credential hygiene directly reduces the attack surface but does not eliminate the bug), and monitor/segment the OT network so a compromised RTU cannot pivot to controllers. Because heap corruption can also simply crash the device, deploy integrity and availability monitoring with out-of-band alerting for unexpected RTU restarts, and keep offline backups of configurations to speed recovery; note that segmentation and account restrictions may affect existing polling integrations and should be tested in a lab or staged rollout before production change.

Affected VersionsENISA

ADAM-3600 prior to version 2.8.5.0

Affected Packages

euvd adam_3600_prior_to_version no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

The affected component is the Advantech ADAM-3600, an intelligent remote terminal unit (RTU) used in industrial/OT and SCADA deployments, matched by CPE cpe:2.3:a:advantech:adam-3600. The weakness class is a heap-based buffer overflow: memory allocated on the heap is written beyond its boundary, corrupting adjacent heap metadata or object pointers. In an RTU context, such corruption can crash the device (availability loss on a control-network asset) or, if the attacker can control heap layout and overflow contents, redirect execution and achieve arbitrary code execution at the privilege level of the vulnerable service. The CVSS 4.0 vector uses AT:N (attack requirements: none beyond the stated complexity) with AC:H, meaning the attacker must satisfy non-default conditions - typically precise heap state manipulation/grooming or a specific malformed input sequence along a privileged protocol/administrative path - before the overflow yields reliable code execution. No CWE identifier was supplied with the record, but the behavior is characteristic of classic heap overflow classes (CWE-122/CWE-787 family). The root cause sits in input handling within an RTU that is network-reachable (AV:N) but gated behind high-privilege authentication (PR:H), with no user interaction required (UI:N).

Know when Adam 3600 gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (CSA) PRIMARY 7.5 HIGH
CVSS:4.0/AV:N/AC:H/AT:N/PR:H/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N
vuln.today AI 6.6 MEDIUM

Network-reachable but requires privileged authentication (PR:H) and non-trivial heap conditions (AC:H); successful overflow yields full code execution, so C/I/A all High with unchanged scope.

3.1 AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H
4.0 AV:N/AC:H/AT:N/PR:H/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N

Primary rating from Vendor (CSA).

CVSS VectorVendor: CSA

Attack Vector
Network
Attack Complexity
High
Attack Requirements
None
Privileges Required
High
User Interaction
None
Vulnerable system: Confidentiality
High
Vulnerable system: Integrity
High
Vulnerable system: Availability
High
Subsequent system: Confidentiality
None
Subsequent system: Integrity
None
Subsequent system: Availability
None

DescriptionCVE.org

A heap-based buffer overflow vulnerability could allow a remote authenticated attacker to achieve arbitrary code execution.

Executive ViewAI

Why It Matters

Advantech ADAM-3600 remote terminal units are exposed to a high-severity memory-corruption flaw that a privileged authenticated user could use to disrupt operations or execute code on the device, putting sites that depend on these RTUs for remote monitoring and control at risk. With no vendor patch available, leadership should treat this as an OT resilience and access-governance issue rather than a routine IT patch cycle.

Business Impact: High
Compensating Controls

No vendor patch available; restrict network access to ADAM-3600 management interfaces, segment OT networks, enforce least privilege and credential rotation, disable unused services, monitor for anomalous activity, and limit engineering access to trusted hosts.

Threat Intelligence Overview

EPSS Score
0.6%
Top 53% exploitable
Prevalence
Low
industrial OT/RTU controller, niche ICS vendor footprint
Threat Intel
1
1 source
Social Media
1
Sightings
Data Quality
4 sources
Confidence: Medium

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity HIGH
CISA KEV No
Public POC No
EPSS 0.6%
Patch available No
Active threat No
Deciding rule
HIGH severity (CVSS 7.0-8.9)
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision
Scheduled
Exploitation
None
System Exposure· derived
Open
Automatable
No
Human Impact
High
Technical Impact
Total

Priority Score

39
Low Medium High Critical
KEV: 0
EPSS: +1
CVSS: +38
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

A buffer overflow occurs when a program writes more data to a memory buffer than it was allocated to hold, causing the excess data to spill into adjacent memory regions.

A heap overflow occurs when a program writes data beyond the bounds of a buffer allocated in the heap memory region.

Remote Code Execution represents the critical moment when an attacker successfully runs arbitrary code on a target system without physical access.

CVE-2026-43836 CRITICAL
9.3 Oct 20

Forged network packets sent to the Advantech ADAM-3600 remote terminal unit (RTU) can trigger arbitrary command executio

CVE-2026-43844 CRITICAL
9.3 Oct 20

Authentication bypass in Advantech ADAM-3600 remote terminal units allows unauthenticated network attackers to bypass th

CVE-2026-43845 CRITICAL
9.2 Oct 20

Authentication bypass in Advantech ADAM-3600 enables unauthenticated network attackers to abuse the password-reset mecha

CVE-2026-43838 CRITICAL
9.2 Oct 20

Unauthenticated remote code execution is possible against the Advantech ADAM-3600 through a stack-based buffer overflow

CVE-2026-43850 HIGH
8.6 Oct 20

Authenticated, high-privilege users of the Advantech ADAM-3600 industrial edge gateway can exploit a command injection f

CVE-2026-43839 HIGH
8.7 Oct 20

Unauthenticated remote attackers can crash the logs management service on Advantech ADAM-3600 industrial RTUs/controller

CVE-2026-43858 HIGH
8.6 Oct 20

Stack-based buffer overflow in Advantech ADAM-3600 can let a remote attacker with administrative credentials execute arb

CVE-2026-43856 HIGH
8.6 Oct 20

Stack-based buffer overflow in Advantech ADAM-3600's FileProcess::CheckDir path handling lets an authenticated attacker

CVE-2026-43857 HIGH
8.6 Oct 20

Arbitrary code execution on Advantech ADAM-3600 devices is possible for remote attackers who already possess high-privil

CVE-2026-43846 HIGH
8.6 Oct 20

Stack-based buffer overflow in Advantech ADAM-3600 industrial remote I/O modules lets a high-privileged authenticated at

CVE-2026-43835 HIGH
8.6 Oct 20

A privileged, authenticated attacker who can reach the Advantech ADAM-3600 firmware upgrade function can upload a forged

CVE-2026-43853 HIGH
8.2 Oct 20

The Advantech ADAM-3600 industrial RTU/edge controller can be crashed by a remotely delivered crafted message that trigg

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy