Skip to main content

Fuji Electric V-SFT CVE-2026-107898

| EUVDEUVD-2026-109628 HIGH
Out-of-bounds Read (CWE-125)
2026-10-26 jpcert GHSA-7prg-rrw7-gvcr
8.4
CVSS 4.0 · Vendor: jpcert
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Craft malicious V7 project file
  2. Exploit
    Deliver to V-SFT operator or engineer
  3. Execution
    Victim opens file triggering OOB read in MacroCommandCheck
  4. Impact
    Leak memory or execute arbitrary code on workstation

Vulnerability Assessment

Weakness
CWE
ASVS 5.0
V15 - Secure Coding and Architecture Bounds checking, read limits
MITRE ATT&CK

1 technique across 1 tactic: Collection

The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up.

Exploitation Conditions

Exploitation requires a user to open an attacker-crafted V7 file in Fuji Electric V-SFT; the vulnerable path is the macro-command check in CDataRomErrorCheck::MacroCommandCheck during file parsing. The CVSS vector confirms this is local with required active user interaction (AV:L/UI:A/PR:N) - there is no network vector and no authentication is needed by the attacker, but the attack cannot proceed without the victim opening the malicious file on a host where V-SFT is installed. Limiting factors: the attacker must first deliver the file and socially engineer the victim into opening it, and impact is confined to the engineering workstation running V-SFT rather than any remotely exposed service.

Impact

Signals are moderate and consistent rather than alarming. The CVSS 4.0 base score of 8.4 (High) is driven by high confidentiality, integrity and availability impact (VC:H/VI:H/VA:H), but the vector is local with active user interaction (AV:L/AC:L/PR:N/UI:A): this is a client-side file-parsing flaw, not a remotely reachable service bug. An attacker cannot trigger it over the network; a user must open a crafted V7 file in V-SFT. Exploitation status is 'no public exploit identified at time of analysis' - the two references are the Fuji Electric vendor advisory and the JVN/JPCERT coordination note, neither of which is PoC or exploit code. The vuln.today decision label is 'this_week', i.e. prioritized but below act_now/emergency. KEV status is not listed (no CISA KEV entry) and no EPSS score is provided in the input, so widespread-exploitation probability cannot be quantified from the data. Net: a genuine high-severity memory-safety issue in OT engineering software warranting patching this week, but the local/user-interaction requirement and absence of KEV, EPSS and public PoC mean it is not a drop-everything emergency.

Exploit ScenarioDerived

An attacker crafts a malicious V7 project file and delivers it to an engineer or integrator (via email, shared project repository, USB, or a compromised supplier handoff). When the victim opens the file in V-SFT, the out-of-bounds read in CDataRomErrorCheck::MacroCommandCheck is triggered, leaking process memory or, in the worst case, achieving arbitrary code execution on the engineering workstation. No public exploit code is identified at time of analysis, and the local vector with required user interaction (AV:L/UI:A) means the attack hinges on social engineering the victim into opening the file.

This Week Schedule remediation this week. Why: HIGH severity (CVSS 7.0-8.9).
No patch listed yet 0.1% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 26, 2026

Opening a crafted V7 project file in Fuji Electric V-SFT can trigger an out-of-bounds read in the macro-command check path, leading to information disclosure or arbitrary code execution on the workstation running the product. The flaw is local to the host, requires no attacker privileges, and depends on the victim opening the malicious file, so exploitation is constrained by file delivery and user interaction rather than remote network access. No public exploit was identified at time of analysis, and the vendor and JVN advisories are the available sources for affected-version and update details.

RemediationAI

The supplied data does not identify a fixed V-SFT version, so consult the Fuji Electric advisory at https://felib.fujielectric.co.jp/en/M10010/M20060/document_detail/5d9dd71d-9494-41a4-aa5c-8e6b8b21066b?region=en-glb and JVN JVNVU96549652 at https://jvn.jp/en/vu/JVNVU96549652/ for the vendor's patched release and upgrade guidance. Because exploitation requires the victim to open a crafted V7 file, restrict delivery of untrusted V7 project files to workstations running V-SFT, block such files at email and file-sharing gateways where feasible, and isolate V-SFT hosts from broad network access. These measures reduce the chance of file delivery and limit post-exploitation reach, but they do not remove the parser flaw; apply the vendor update once a fixed version is confirmed. Blocking V7 files may disrupt legitimate project exchange, and host isolation can constrain workflows, so scope both controls to business needs.

Affected VersionsENISA

V-SFT 0 ≤6.2.11.0

Affected Packages

euvd v_sft no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

V-SFT is the affected Fuji Electric/Hakko Electronics product identified by the supplied CPE. The vulnerability is an out-of-bounds read (CWE-125) in VS6EditData!CDataRomErrorCheck::MacroCommandCheck, reached while parsing macro commands in a V7 file. The supplied CVSS 4.0 vector (AV:L/AC:L/AT:N/PR:N/UI:A) and the independent CVSS 3.1 assessment (AV:L/AC:L/PR:N/UI:R) both indicate a local attack path with no required privileges and user interaction; the trigger is file parsing, not a remotely reachable service. Successful exploitation may expose memory contents or, under the conditions described by the vendor/JVN advisories, lead to arbitrary code execution.

Know when V Sft gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (jpcert) PRIMARY 8.4 HIGH
CVSS:4.0/AV:L/AC:L/AT:N/PR:N/UI:A/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N
vuln.today AI 7.8 HIGH

Local file-open flaw requiring victim interaction so AV:L/UI:R/PR:N; out-of-bounds read enabling info disclosure and potential code execution gives C:H/I:H/A:H.

3.1 AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H
4.0 AV:L/AC:L/AT:N/PR:N/UI:A/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N

Primary rating from Vendor (jpcert).

CVSS VectorVendor: jpcert

Attack Vector
Local
Attack Complexity
Low
Attack Requirements
None
Privileges Required
None
User Interaction
Active
Vulnerable system: Confidentiality
High
Vulnerable system: Integrity
High
Vulnerable system: Availability
High
Subsequent system: Confidentiality
None
Subsequent system: Integrity
None
Subsequent system: Availability
None

Lifecycle Timeline

2
CVSS changed
Oct 26, 2026 - 07:22 NVD
7.8 (HIGH) 8.4 (HIGH)
CVE Published
Oct 26, 2026 - 06:26 cve.org
HIGH 8.4

DescriptionCVE.org

V-SFT provided by FUJI ELECTRIC CO., LTD. contains an out-of-bounds read vulnerability in VS6EditData!CDataRomErrorCheck::MacroCommandCheck. Opening a crafted V7 file may lead to information exposure or arbitrary code execution on the affected product.

Executive ViewAI

Why It Matters

A high-severity vulnerability in Fuji Electric's V-SFT workstation software (used for programming and monitoring industrial control systems) allows a malicious project file to potentially leak sensitive information or execute arbitrary code when opened by an engineer. This puts operational technology (OT) engineering workstations at risk, where a compromise could disrupt industrial processes or expose confidential data. Leadership should prioritize mitigation because these workstations are often connected to critical infrastructure and the vulnerability requires no special privileges, only user interaction with a crafted file.

Business Impact: High
Compensating Controls

No vendor-released patch identified at time of analysis. Interim mitigations include: strict user awareness training on avoiding untrusted project files; application allowlisting to block unauthorized executables; sandboxing or isolated virtual machines for opening V-SFT files; network segmentation to limit lateral movement; and enhanced monitoring for anomalous behavior on engineering workstations.

Threat Intelligence Overview

EPSS Score
0.1%
Top 98% exploitable
Prevalence
Low
ICS/OT HMI configuration tool for Fuji/Hakko MONITOUCH panels, niche use
Social Media
1
Sightings
Data Quality
4 sources
Confidence: Medium

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity HIGH
CISA KEV No
Public POC No
EPSS 0.1%
Patch available No
Active threat No
Deciding rule
HIGH severity (CVSS 7.0-8.9)
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision
Scheduled
Exploitation
None
System Exposure· derived
Small
Automatable
No
Human Impact
High
Technical Impact
Total

Priority Score

42
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +42
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

A buffer overflow occurs when a program writes more data to a memory buffer than it was allocated to hold, causing the excess data to spill into adjacent memory regions.

Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.

Remote Code Execution represents the critical moment when an attacker successfully runs arbitrary code on a target system without physical access.

More in V Sft

View all
CVE-2026-107894 HIGH
8.4 Oct 26

Opening a crafted V7 project file in Fuji Electric V-SFT (the HMI screen-configuration and programming software, listed

CVE-2026-107900 HIGH
8.4 Oct 26

Out-of-bounds read in Fuji Electric V-SFT can be triggered when a user opens a crafted V7 project file, potentially expo

CVE-2026-107899 HIGH
8.4 Oct 26

Opening a crafted V7 project file in Fuji Electric/Hakko V-SFT can cause an out-of-bounds read in VS6EditData!CDataRomEr

CVE-2026-107897 HIGH
8.4 Oct 26

Opening a crafted V7 project file in Fuji Electric's V-SFT screen-creation/engineering software can drive an out-of-boun

CVE-2026-107896 HIGH
8.4 Oct 26

Out-of-bounds read in Fuji Electric V-SFT's VS6ComFile!load_gr_item routine can expose memory contents or enable arbitra

CVE-2026-107895 HIGH
8.4 Oct 26

An out-of-bounds write in Fuji Electric's V-SFT screen-creation software (also published under Hakko Electronics) is tri

CVE-2026-32928 HIGH
8.4 Apr 01

Stack-based buffer overflow in Fuji Electric/Hakko Electronics V-SFT versions through 6.2.10.0 enables arbitrary code ex

CVE-2026-32925 HIGH
8.4 Apr 01

Stack-based buffer overflow in Fuji Electric/HAKKO Electronics V-SFT automation software (versions ≤6.2.10.0) allows arb

CVE-2026-32929 HIGH
8.4 Apr 01

Out-of-bounds read in Fuji Electric V-SFT 6.2.10.0 and earlier allows local attackers to disclose sensitive information

CVE-2026-32927 HIGH
8.4 Apr 01

Out-of-bounds read in Fuji Electric V-SFT 6.2.10.0 and earlier allows local attackers to extract sensitive memory conten

CVE-2026-32926 HIGH
8.4 Apr 01

Out-of-bounds read in Fuji Electric V-SFT industrial HMI software (versions ≤6.2.10.0) enables local attackers to disclo

CVE-2022-29925 HIGH
7.8 Jun 14

Access of uninitialized pointer vulnerability exists in the simulator module contained in the graphic editor 'V-SFT' ver

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy