Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
ReconObtain low-privilege LDAP bind credentials
-
DeliveryConnect to directory server over network (port 389/636)
-
ExploitSend crafted SASL UNBIND request
-
InstallTrigger connection stall in SASL handler
-
C2Repeat across multiple connections
-
ExecuteExhaust server resources
-
ImpactDirectory service unavailable
Vulnerability Assessment
| Weakness |
CWE
ASVS 5.0
V15 - Secure Coding and Architecture Bounds checking, write limits
MITRE ATT&CK
2 techniques across 2 tactics: Execution, Privilege Escalation The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Exploitation requires a valid LDAP authenticated session at low privilege (PR:L per CVSS vector) - any account capable of performing an LDAP bind is sufficient; no administrative or elevated permissions are needed. The attacker must have network-layer access to the LDAP service (AV:N, default ports 389 for LDAP or 636 for LDAPS). SASL must be in use for the authentication/connection in question, which is a common and typically default configuration in enterprise deployments of 389-ds-base. No user interaction is required (UI:N). The impact is strictly limited to server availability - no confidentiality or integrity compromise is described. Exploitation is further constrained to the scope of the directory server process itself (S:U); adjacent systems are not directly impacted by this vulnerability. The primary limiting factor is the requirement for prior authentication, even at minimal privilege level. |
| Impact | CVSS 6.5 with vector AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H reflects a medium-severity, straightforward network attack requiring only low-privilege credentials. The high availability impact is significant: 389 Directory Server underpins LDAP authentication for enterprise Linux environments, so a successful DoS disrupts logins, service account lookups, and downstream SSO for all dependent systems. EPSS data is not present in the input, so exploitation probability cannot be quantified. No KEV listing and no identified POC code indicate no confirmed widespread exploitation, lowering urgency slightly. However, any authenticated LDAP user - including low-privilege service accounts, which are abundant in enterprise directories - can trigger the flaw, making the practical exploitation bar low once credentials are obtained. Under an SSVC lens: exploitation status is none confirmed, the attack is potentially automatable (single crafted request over the network), and technical impact is partial (availability only). The critical caveat is the CWE-787 tag: if a genuine out-of-bounds write primitive underlies the stall, the severity could be materially understated relative to the described DoS-only impact - this should be treated as an open question until the full Red Hat advisory clarifies. |
| Exploit ScenarioDerived | An attacker who has compromised a low-privilege LDAP service account - or a malicious insider with any valid LDAP bind credential - connects to the directory server over the network and sends a specially crafted SASL UNBIND request designed to trigger the stall condition. By repeating this across multiple connections, the attacker exhausts server resources (connection threads, file descriptors, or memory), causing 389 Directory Server to become unresponsive to all subsequent LDAP clients. No public exploit code has been identified, but the low attack complexity (AC:L) and availability of the LDAP protocol specification make independent reproduction feasible for a skilled attacker. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Aug 25, 2026
Resource exhaustion via crafted SASL UNBIND in 389 Directory Server (389-ds-base) allows a remote authenticated attacker to stall connections and deny LDAP service to legitimate users. Affected deployments span Red Hat Directory Server 11, 12, and 13, plus 389-ds-base as packaged across RHEL 6 through 10. No public exploit code or CISA KEV listing has been identified at time of analysis, though the CVSS 6.5 rating (AV:N/AC:L/PR:L) indicates low-complexity network exploitation requiring only a low-privilege LDAP bind - a realistic bar in any environment with shared directory users.
RemediationAI
Apply the Red Hat security errata for 389-ds-base once published - monitor https://access.redhat.com/security/cve/CVE-2026-78701 and https://bugzilla.redhat.com/show_bug.cgi?id=2523232 for the specific package version; no exact fix build is confirmed in available data at time of analysis. As a compensating control, restrict LDAP service access (port 389/636) at the network layer to only authorized subnets and systems using firewall ACLs, reducing the pool of clients capable of sending SASL UNBIND requests - note this does not eliminate risk from already-trusted clients or insider threats. Audit LDAP accounts and revoke or scope-limit service accounts that do not require bind access, shrinking the pool of principals that could exploit the flaw. Disabling SASL entirely is not recommended as it breaks standard LDAP client authentication. Monitor for anomalous spikes in connection count or stalled connections from single source IPs as an operational indicator. If the CWE-787 out-of-bounds write classification is confirmed accurate, treat this as a potential memory-safety issue and prioritize patching accordingly, as compensating controls for memory corruption are limited without an OS-level exploit mitigation review.
Affects your stack
Find out whether the stacks and servers you run are on an affected version.
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
389 Directory Server (389-ds-base) is an open-source LDAP server maintained by Red Hat, forming the upstream for Red Hat Directory Server (RHDS). SASL (Simple Authentication and Security Layer, RFC 4422) is the extensible framework used by LDAP for authentication and data security negotiation. The LDAP UNBIND operation signals client disconnection and should result in clean resource release. The flaw lies in the SASL UNBIND processing path: a specially crafted UNBIND request causes the server to stall the connection rather than terminating it, consistent with CWE-400 (Uncontrolled Resource Consumption) or CWE-772 (Missing Release of Resource). Notably, the assigned CWE is CWE-787 (Out-of-bounds Write), which indicates a buffer-write overrun - a more serious memory-safety primitive that could underpin the stall behaviour but also potentially enables memory corruption. This CWE-787 designation versus the described DoS-via-stall symptom is a material discrepancy that warrants verification against the full Red Hat advisory and Bugzilla entry.
Know when Red Hat Enterprise Linux 10 gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Network-reachable LDAP service requires only any valid authenticated bind (PR:L); impact is availability-only DoS with no data exposure or integrity change.
Primary rating from Vendor (redhat).
CVSS VectorVendor: redhat
DescriptionCVE.org
A flaw was found in 389-ds-base. A remote, authenticated attacker could exploit a vulnerability in the Simple Authentication and Security Layer (SASL) UNBIND process. By sending a specially crafted request, the attacker can cause a connection to stall, leading to resource exhaustion and a Denial of Service (DoS) for the server.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
A buffer overflow occurs when a program writes more data to a memory buffer than it was allocated to hold, causing the excess data to spill into adjacent memory regions.
Memory corruption occurs when a program writes data beyond the boundaries of allocated memory regions or accesses memory in unintended ways, violating the integrity of the process's address space.
Denial of Service attacks render applications or systems unavailable by overwhelming resources or triggering failure conditions.
Affected Products (CPE)CVE.org
More in Red Hat Enterprise Linux 10
View allHeap corruption via double-free in 389-ds-base's LDAP control parsing allows an unauthenticated remote attacker to crash
Remote code execution in Cockpit's web interface allows unauthenticated attackers to execute arbitrary commands on the h
Remote code execution in Samba's printing subsystem allows remote attackers to inject arbitrary shell commands via craft
Ghostscript can execute arbitrary shell commands with the privileges of its process when it renders a crafted PostScript
Authentication bypass in 389 Directory Server (shipped as Red Hat Directory Server 11-13 and within RHEL 6-10) lets remo
Remote code execution and privilege escalation in HPLIP (HP Linux Imaging and Printing) affects the hpcups print filter
Unauthenticated privilege escalation in FreeIPA (Red Hat Identity Management) allows a remote attacker to gain genuine a
A heap buffer overflow exists in libsoup's WebSocket permessage-deflate compression path: when a very large outbound mes
Remote code execution in libarchive on 32-bit systems allows unauthenticated attackers to execute arbitrary code via spe
Unauthenticated path traversal in gvproxy, the network forwarder shipped in the gvisor-tap-vsock package (used by Podman
HTTP request smuggling in Undertow (the embedded web server underpinning JBoss EAP, Red Hat Data Grid, and Apache Camel
HTTP request smuggling in Red Hat Undertow allows remote unauthenticated attackers to bypass front-end security controls
Same weakness CWE-787 – Out-of-bounds Write
View allSame technique Buffer Overflow
View allVendor StatusVendor
SUSE
Severity: Moderate| Product | Status |
|---|---|
| SUSE Linux Enterprise Module for Server Applications 15 SP7 | Affected |
| SUSE Linux Enterprise Server 15 SP7 | Affected |
| SUSE Linux Enterprise Server 16.0 | Affected |
| SUSE Linux Enterprise Server 16.1 | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP7 | Affected |
| SUSE Linux Enterprise Server for SAP applications 16.0 | Affected |
| SUSE Linux Enterprise Server for SAP applications 16.1 | Affected |
| openSUSE Leap 16.0 | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP4-LTSS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP5 | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP5-LTSS | Affected |
| SUSE Linux Enterprise Module for Server Applications 15 SP4 | Affected |
| SUSE Linux Enterprise Module for Server Applications 15 SP5 | Affected |
| SUSE Linux Enterprise Module for Server Applications 15 SP6 | Affected |
| SUSE Linux Enterprise Server 15 SP4 | Affected |
| SUSE Linux Enterprise Server 15 SP4-LTSS | Affected |
| SUSE Linux Enterprise Server 15 SP5 | Affected |
| SUSE Linux Enterprise Server 15 SP5-LTSS | Affected |
| SUSE Linux Enterprise Server 15 SP6 | Affected |
| SUSE Linux Enterprise Server 15 SP6-LTSS | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP4 | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP5 | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP6 | Affected |
| SUSE CaaS Platform 4.0 | Affected |
| SUSE Enterprise Storage 6 | Affected |
| SUSE Enterprise Storage 7 | Affected |
| SUSE Enterprise Storage 7.1 | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP1 | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP1-ESPOS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP2 | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP2-ESPOS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP3 | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP4 | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP4-ESPOS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP5-ESPOS | Affected |
| SUSE Linux Enterprise Module for Server Applications 15 SP1 | Affected |
| SUSE Linux Enterprise Module for Server Applications 15 SP2 | Affected |
| SUSE Linux Enterprise Module for Server Applications 15 SP3 | Affected |
| SUSE Linux Enterprise Real Time 15 SP2 | Affected |
| SUSE Linux Enterprise Real Time 15 SP3 | Affected |
| SUSE Linux Enterprise Real Time 15 SP4 | Affected |
| SUSE Linux Enterprise Server 15 SP1 | Affected |
| SUSE Linux Enterprise Server 15 SP1-BCL | Affected |
| SUSE Linux Enterprise Server 15 SP1-LTSS | Affected |
| SUSE Linux Enterprise Server 15 SP2 | Affected |
| SUSE Linux Enterprise Server 15 SP2-BCL | Affected |
| SUSE Linux Enterprise Server 15 SP2-LTSS | Affected |
| SUSE Linux Enterprise Server 15 SP3 | Affected |
| SUSE Linux Enterprise Server 15 SP3-BCL | Affected |
| SUSE Linux Enterprise Server 15 SP3-LTSS | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP1 | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP2 | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP3 | Affected |
| SUSE Manager Proxy 4.0 | Affected |
| SUSE Manager Proxy 4.1 | Affected |
| SUSE Manager Proxy 4.2 | Affected |
| SUSE Manager Proxy 4.3 | Affected |
| SUSE Manager Proxy LTS 4.3 | Affected |
| SUSE Manager Retail Branch Server 4.0 | Affected |
| SUSE Manager Retail Branch Server 4.1 | Affected |
| SUSE Manager Retail Branch Server 4.2 | Affected |
| SUSE Manager Retail Branch Server 4.3 | Affected |
| SUSE Manager Retail Branch Server LTS 4.3 | Affected |
| SUSE Manager Server 4.0 | Affected |
| SUSE Manager Server 4.1 | Affected |
| SUSE Manager Server 4.2 | Affected |
| SUSE Manager Server 4.3 | Affected |
| SUSE Manager Server LTS 4.3 | Affected |
| openSUSE Leap 15.3 | Affected |
| openSUSE Leap 15.4 | Affected |
| openSUSE Leap 15.5 | Affected |
| openSUSE Leap 15.6 | Affected |
| suse/389-ds | Affected |
EUVD-2026-65312
GHSA-xmh3-2gr9-2rwp
NVD
CVE.org
EPSS
Vulnrichment
VulDB
Exploit-DB