Skip to main content
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Obtain valid admin credentials
  2. Delivery
    Authenticate to VigorSwitch web management interface
  3. Exploit
    Submit crafted username/password payload to setDevProto function
  4. Execution
    Bypass insufficient input filtering
  5. Impact
    Execute arbitrary OS commands as root

Vulnerability Assessment

Weakness
CWE
OWASP Top 10:2025
A05:2025 - Injection
ASVS 5.0
V1 - Encoding and Sanitization OS command sanitization, avoid shell exec
MITRE ATT&CK

2 techniques across 1 tactic: Execution

The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up.

Exploitation Conditions

Exploitation requires valid administrative credentials for the DrayTek VigorSwitch web management interface - the CVSS 4.0 PR:H metric confirms high-privilege authentication is mandatory and is explicitly stated in the CVE description. The attacker must have network access to the web management interface (AV:N). The vulnerability is triggered specifically by submitting crafted input to the setDevProto function via the username or password fields - no special non-default device configuration is required beyond the management interface being reachable. The primary factor limiting exploitation is the admin credential requirement: an attacker without valid credentials cannot reach the vulnerable code path. Deployment postures most at risk are internet-exposed management interfaces combined with weak, default, or reused credentials. Environments where the management interface is restricted to internal networks or VPN access face substantially lower exploitation probability.

Impact

The CVSS 4.0 score of 8.6 accurately reflects the high impact potential but is tempered by the PR:H requirement - valid administrative credentials are mandatory for exploitation, making this a post-authentication vulnerability rather than an unauthenticated RCE. Real-world risk is therefore heavily dependent on the credential exposure posture: internet-facing management interfaces with default, weak, or previously compromised credentials elevate practical exploitability significantly. The network attack vector (AV:N) and low complexity (AC:L) mean that once credentials are obtained, exploitation is straightforward and requires no special tooling or timing. No EPSS data was provided, no CISA KEV listing is confirmed, and no public POC has been identified - these are meaningful risk-reducing signals. The CVSS vector is internally consistent with the description and shows no conflicts. For organizations with the management interface isolated to internal networks and strong credential hygiene, this is a medium-priority patching item; for those with internet-exposed management interfaces or credential reuse exposure, it warrants urgent remediation.

Exploit ScenarioDerived

An attacker who has acquired valid VigorSwitch administrative credentials - via credential stuffing against an internet-exposed management portal, phishing, or reuse from a previously compromised account - authenticates to the web management interface and submits a crafted HTTP request to the setDevProto function with shell metacharacters embedded in the username or password field. The unsanitized input is passed directly to an OS command execution context, resulting in arbitrary command execution as root on the switch's operating system. No public POC has been identified, but CWE-78 injection in web management interfaces is a well-documented and easily exploitable pattern once valid credentials are in hand.

This Week Schedule remediation this week. Why: HIGH severity (CVSS 7.0-8.9).
Patch available 3.1% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Aug 24, 2026

Command injection in multiple DrayTek VigorSwitch models enables authenticated administrators to execute arbitrary OS commands with root privileges through the setDevProto function's unsanitized username and password fields. At least 10 CPE-confirmed models are affected, with vendor tags suggesting a broader footprint of approximately 28 VigorSwitch variants. No public exploit code or CISA KEV listing has been identified at time of analysis; however, DrayTek published a security advisory in August 2026 acknowledging the vulnerability and the authentication prerequisite of valid admin credentials is the primary constraint on real-world exploitation.

RemediationAI

Apply the firmware update released by DrayTek as documented in the security advisory at https://www.draytek.com/about/security-advisory/multiple-vulnerabilities-in-vigorswitch-series-august-2026/. Exact patched firmware versions must be obtained directly from that advisory, as specific fix versions were not present in the available intelligence data. As an immediate compensating control pending patching, restrict the web management interface to trusted internal management VLANs or VPN-only access - eliminating internet exposure of the admin interface removes the network attack vector entirely and is highly effective with minimal operational impact for most deployments. Additionally, audit and rotate all administrative credentials on affected devices to limit exposure from credential reuse or prior compromise. If web management is not operationally required, disabling it and managing the switch via CLI over SSH provides strong mitigation without loss of core switching functionality. The VulnCheck advisory at https://www.vulncheck.com/advisories/draytek-vigorswitch-multiple-models-os-command-injection-via-setdevproto may contain additional technical detail to assist triage.

Affected VersionsENISA

VigorSwitch P1282 0 <2.9.10
VigorSwitch G2542x 0 <3.10.6
VigorSwitch P2280x 0 <2.9.10
VigorSwitch FX2120 0 <3.9.10
VigorSwitch PQ2200xb 0 <2.9.10
VigorSwitch P2542x 0 <3.10.6
VigorSwitch P1281x 0 <2.9.10
VigorSwitch G2280x 0 <2.9.10
VigorSwitch G2540xs 0 <3.9.10
VigorSwitch Q2200x 0 <2.9.10
VigorSwitch P1280 0 <2.9.10
VigorSwitch P2540xs 0 <3.9.10
VigorSwitch G2282x 0 <2.10.6
VigorSwitch PQ2300xb 0 <2.10.7
VigorSwitch P2121 0 <2.9.10
VigorSwitch P2542xh 0 <3.10.6
VigorSwitch PQ2121x 0 <2.9.10
VigorSwitch P2540x 0 <2.9.10
VigorSwitch P2282x 0 <2.10.6
VigorSwitch G2121 0 <2.9.10
VigorSwitch G2540x 0 <2.9.10
VigorSwitch Q2300x 0 <2.10.7
VigorSwitch G1282 0 <2.9.10
VigorSwitch Q2121x 0 <2.9.10
VigorSwitch G1280 0 <2.9.10
VigorSwitch PX2060 0 <2.9.10
VigorSwitch P2100 0 <2.9.10
VigorSwitch G2100 0 <2.9.10

Affected Packages

euvd vigorswitch_fx2120 fix: 3.9.10
euvd vigorswitch_g1280 fix: 2.9.10
euvd vigorswitch_g1282 fix: 2.9.10
euvd vigorswitch_g2100 fix: 2.9.10
euvd vigorswitch_g2121 fix: 2.9.10
euvd vigorswitch_g2280x fix: 2.9.10
euvd vigorswitch_g2282x fix: 2.10.6
euvd vigorswitch_g2540x fix: 2.9.10
euvd vigorswitch_g2540xs fix: 3.9.10
euvd vigorswitch_g2542x fix: 3.10.6
euvd vigorswitch_p1280 fix: 2.9.10
euvd vigorswitch_p1281x fix: 2.9.10
euvd vigorswitch_p1282 fix: 2.9.10
euvd vigorswitch_p2100 fix: 2.9.10
euvd vigorswitch_p2121 fix: 2.9.10
euvd vigorswitch_p2280x fix: 2.9.10
euvd vigorswitch_p2282x fix: 2.10.6
euvd vigorswitch_p2540x fix: 2.9.10
euvd vigorswitch_p2540xs fix: 3.9.10
euvd vigorswitch_p2542x fix: 3.10.6
euvd vigorswitch_p2542xh fix: 3.10.6
euvd vigorswitch_pq2121x fix: 2.9.10
euvd vigorswitch_pq2200xb fix: 2.9.10
euvd vigorswitch_pq2300xb fix: 2.10.7
euvd vigorswitch_px2060 fix: 2.9.10
euvd vigorswitch_q2121x fix: 2.9.10
euvd vigorswitch_q2200x fix: 2.9.10
euvd vigorswitch_q2300x fix: 2.10.7

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 28 packages in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

The vulnerability resides in the setDevProto function of the VigorSwitch web management interface, which fails to adequately sanitize username and password field values before incorporating them into OS-level command execution - a textbook CWE-78 (Improper Neutralization of Special Elements used in an OS Command) flaw. Attacker-controlled input is concatenated directly into shell commands without escaping or allowlist validation, allowing shell metacharacters to break out of the intended command context. The affected CPE strings (cpe:2.3:a:draytek_corporation:vigorswitch_*) cover at least 10 distinct hardware models across DrayTek's managed PoE and non-PoE switch lines. The CVSS 4.0 vector AV:N/AC:L/AT:N/PR:H/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N is fully consistent with this description: the web management interface is network-reachable, exploitation requires no special complexity beyond supplying crafted input, and the resulting commands execute with root-level OS privileges giving full confidentiality, integrity, and availability impact to the switch's operating system.

Know when Vigorswitch G2540Xs gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (VulnCheck) PRIMARY 8.6 HIGH
CVSS:4.0/AV:N/AC:L/AT:N/PR:H/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N
vuln.today AI 7.2 HIGH

Admin credentials required per description sets PR:H; network-accessible web interface gives AV:N; root command execution yields full C/I/A; no scope change as impact stays within the switch OS.

3.1 AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H
4.0 AV:N/AC:L/AT:N/PR:H/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N

Primary rating from Vendor (VulnCheck).

CVSS VectorVendor: VulnCheck

Attack Vector
Network
Attack Complexity
Low
Attack Requirements
None
Privileges Required
High
User Interaction
None
Vulnerable system: Confidentiality
High
Vulnerable system: Integrity
High
Vulnerable system: Availability
High
Subsequent system: Confidentiality
None
Subsequent system: Integrity
None
Subsequent system: Availability
None

Lifecycle Timeline

2
Patch available
Aug 24, 2026 - 18:02 EUVD
CVE Published
Aug 24, 2026 - 17:07 cve.org
HIGH 8.6

DescriptionCVE.org

Multiple DrayTek VigorSwitch models contain a command injection vulnerability in the setDevProto function. The vulnerability is caused by insufficient filtering of the username and password fields before command execution. A remote attacker can trigger this vulnerability via crafted input to execute arbitrary commands with root privileges. Exploitation requires valid administrative credentials for the device's web management interface.

Executive ViewAI

Why It Matters

DrayTek VigorSwitch network infrastructure hardware contains a critical authorization flaw (CVSS 8.6) affecting at least 10 confirmed equipment variants that exposes organizations to root-level compromise through privileged user accounts. The attack surface is restricted to authenticated administrators, but this remains a material risk in environments where administrator credential security or access governance may be weak. Absent vendor-supplied patches, organizations must implement compensating controls immediately.

Business Impact: High
Compensating Controls

Restrict switch management access to segregated administrative networks; enforce multi-factor authentication for all administrative accounts; minimize and document administrator account distribution across personnel; enable and actively monitor detailed administrative command logs; conduct credential hygiene assessment and implement periodic administrative account reviews; evaluate network isolation or replacement of affected switches in critical infrastructure deployments.

Threat Intelligence Overview

EPSS Score
3.1%
Top 13% exploitable
Prevalence
Medium
Enterprise/SMB managed switch vendor with regional distribution
Data Quality
6 sources
Confidence: High

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity HIGH
CISA KEV No
Public POC No
EPSS 3.1%
Patch available Yes
Active threat No
Deciding rule
HIGH severity (CVSS 7.0-8.9)
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision
Scheduled
Exploitation
None
System Exposure· derived
Open
Automatable
No
Human Impact
High
Technical Impact
Total

Priority Score

46
Low Medium High Critical
KEV: 0
EPSS: +3
CVSS: +43
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

OS command injection occurs when an application passes unsanitized user input directly into system shell commands.

CVE-2026-71921 CRITICAL
9.3 Aug 24

Pre-authentication OS command injection in DrayTek VigorSwitch managed switches lets a remote, unauthenticated attacker

CVE-2026-71943 HIGH
8.6 Aug 24

Command injection in DrayTek VigorSwitch's setDevNet function allows authenticated remote attackers to execute arbitrary

CVE-2026-71930 HIGH
8.6 Aug 24

Command injection in DrayTek VigorSwitch's setTime function enables authenticated administrators to execute arbitrary OS

CVE-2026-71925 HIGH
8.6 Aug 24

Command injection in multiple DrayTek VigorSwitch models' getDetail function enables authenticated remote attackers hold

CVE-2026-71924 HIGH
8.6 Aug 24

Command injection in DrayTek VigorSwitch's getVid function allows an authenticated remote administrator to execute arbit

CVE-2026-71919 HIGH
8.6 Aug 24

Command injection in multiple DrayTek VigorSwitch managed switch models allows an authenticated remote administrator to

CVE-2026-71918 HIGH
8.6 Aug 24

Command injection in the DrayTek VigorSwitch `webBackupAction` function allows authenticated remote attackers to execute

CVE-2026-71917 HIGH
8.6 Aug 24

Command injection in the DrayTek VigorSwitch series' pingtrace diagnostic function allows an authenticated administrator

CVE-2026-71915 HIGH
8.6 Aug 24

Command injection in DrayTek VigorSwitch's jsonstatus function allows authenticated remote administrators to execute arb

CVE-2026-71931 HIGH
8.6 Aug 24

Command injection in DrayTek VigorSwitch's tftp_upgrade function enables authenticated remote administrators to execute

CVE-2026-71916 HIGH
8.6 Aug 24

Command injection via the commandTable function affects 28 DrayTek VigorSwitch managed switch models across multiple fir

CVE-2026-71928 HIGH
8.6 Aug 24

Command injection in DrayTek VigorSwitch firmware's fdftDevice function allows an authenticated remote administrator to

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy