Skip to main content

Linux EUVDEUVD-2026-45477

| CVE-2026-63811
2026-07-19 Linux GHSA-wqxg-ff3c-39jf

Lifecycle Timeline

1
CVE Published
Jul 19, 2026 - 12:02 cve.org
UNKNOWN (no severity yet)

DescriptionCVE.org

In the Linux kernel, the following vulnerability has been resolved:

f2fs: read COW data with the original inode during atomic write

When updating an atomic-write file, f2fs_write_begin() may read the previously written data back from the COW inode: prepare_atomic_write_begin() locates the block in the COW inode and sets use_cow, and the read bio is then built with the COW inode:

f2fs_submit_page_read(use_cow ? F2FS_I(inode)->cow_inode : inode, ...);

and f2fs_grab_read_bio() decides whether to schedule fs-layer decryption (STEP_DECRYPT) for the bio based on that inode via fscrypt_inode_uses_fs_layer_crypto().

However, the folio being filled belongs to the original inode (folio->mapping->host == inode), and the data stored in the COW block was encrypted (or left as plaintext) using the original inode's context, not the COW inode's -- see f2fs_encrypt_one_page(), which keys off fio->page->mapping->host. fscrypt_decrypt_pagecache_blocks() likewise operates on folio->mapping->host.

The COW inode is created as a tmpfile in the parent directory and inherits its encryption policy from there. With test_dummy_encryption the newly created COW inode gets the dummy policy and becomes encrypted, while a pre-existing regular file -- created before the policy applied, e.g. already present in the on-disk image -- stays unencrypted. The read path then sets STEP_DECRYPT based on the encrypted COW inode and calls fscrypt_decrypt_pagecache_blocks() on a folio whose host (the unencrypted original inode) has a NULL ->i_crypt_info, dereferencing it:

Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:fscrypt_decrypt_pagecache_blocks+0xa0/0x310 Workqueue: f2fs_post_read_wq f2fs_post_read_work Call Trace: fscrypt_decrypt_bio+0x1eb/0x340 f2fs_post_read_work+0xba/0x140 process_one_work+0x91c/0x1a40 worker_thread+0x677/0xe90 kthread+0x2bc/0x3a0

The COW inode is only needed to locate the on-disk block, and that block address is already resolved into @blkaddr by prepare_atomic_write_begin() via __find_data_block(cow_inode, ...); f2fs_submit_page_read() then reads from that physical @blkaddr directly, so the inode argument only selects the post-read crypto context, not which block is fetched. Reading with @inode therefore returns the same (latest, not-yet-committed) COW data, while making both the fs-layer decryption decision and the inline crypto path use the correct (original inode's) key.

With the COW inode no longer used at the read site, the use_cow flag has no remaining consumer; drop it from f2fs_write_begin() and prepare_atomic_write_begin().

Analysis

In the Linux kernel, the following vulnerability has been resolved:

f2fs: read COW data with the original inode during atomic write

When updating an atomic-write file, f2fs_write_begin() may read the previously written data back from the COW inode: prepare_atomic_write_begin() locates the block in the COW inode and sets use_cow, and the read bio is then built with the COW inode:

f2fs_submit_page_read(use_cow ? F2FS_I(inode)->cow_inode : inode, ...);

and f2fs_grab_read_bio() decides whether to schedule fs-layer decryption (STEP_DECRYPT) for the bio based on that inode via fscrypt_inode_uses_fs_layer_crypto().

However, the folio being filled belongs to the original inode (folio->mapping->host == inode), and the data stored in the COW block was encrypted (or left as plaintext) using the original inode's context, not the COW inode's -- see f2fs_encrypt_one_page(), which keys off fio->page->mapping->host. fscrypt_decrypt_pagecache_blocks() likewise operates on folio->mapping->host.

The COW inode is created as a tmpfile in the parent directory and inherits its encryption policy from there. With test_dummy_encryption the newly created COW inode gets the dummy policy and becomes encrypted, while a pre-existing regular file -- created before the policy applied, e.g. already present in the on-disk image -- stays unencrypted. The read path then sets STEP_DECRYPT based on the encrypted COW inode and calls fscrypt_decrypt_pagecache_blocks() on a folio whose host (the unencrypted original inode) has a NULL ->i_crypt_info, dereferencing it:

Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:fscrypt_decrypt_pagecache_blocks+0xa0/0x310 Workqueue: f2fs_post_read_wq f2fs_post_read_work Call Trace: fscrypt_decrypt_bio+0x1eb/0x340 f2fs_post_read_work+0xba/0x140 process_one_work+0x91c/0x1a40 worker_thread+0x677/0xe90 kthread+0x2bc/0x3a0

The COW inode is only needed to locate the on-disk block, and that block address is already resolved into @blkaddr by prepare_atomic_write_begin() via __find_data_block(cow_inode, ...); f2fs_submit_page_read() then reads from that physical @blkaddr directly, so the inode argument only selects the post-read crypto context, not which block is fetched. Reading with @inode therefore returns the same (latest, not-yet-committed) COW data, while making both the fs-layer decryption decision and the inline crypto path use the correct (original inode's) key.

With the COW inode no longer used at the read site, the use_cow flag has no remaining consumer; drop it from f2fs_write_begin() and prepare_atomic_write_begin().

CVE-2011-3544 CRITICAL POC
9.8 Oct 19

Oracle Java SE JDK/JRE 7 and 6 Update 27 and earlier allows remote code execution with complete system compromise throug

CVE-2019-11043 CRITICAL POC
9.8 Oct 28

In PHP versions 7.1.x below 7.1.33, 7.2.x below 7.2.24 and 7.3.x below 7.3.11 in certain configurations of FPM setup it

CVE-2014-6271 CRITICAL POC
9.8 Sep 24

GNU Bash through 4.3 processes trailing strings after function definitions in the values of environment variables, which

CVE-2013-0422 CRITICAL POC
9.8 Jan 10

Multiple vulnerabilities in Oracle Java 7 before Update 11 allow remote attackers to execute arbitrary code by (1) using

CVE-2016-3714 HIGH POC
8.4 May 05

The (1) EPHEMERAL, (2) HTTPS, (3) MVG, (4) MSL, (5) TEXT, (6) SHOW, (7) WIN, and (8) PLT coders in ImageMagick before 6.

CVE-2017-12617 HIGH POC
8.1 Oct 04

When running Apache Tomcat versions 9.0.0.M1 to 9.0.0, 8.5.0 to 8.5.22, 8.0.0.RC1 to 8.0.46 and 7.0.0 to 7.0.81 with HTT

CVE-2016-8735 CRITICAL POC
9.8 Apr 06

Remote code execution is possible with Apache Tomcat before 6.0.48, 7.x before 7.0.73, 8.x before 8.0.39, 8.5.x before 8

CVE-2014-7169 CRITICAL POC
9.8 Sep 25

GNU Bash through 4.3 bash43-025 processes trailing strings after certain malformed function definitions in the values of

CVE-2014-0160 HIGH POC
7.5 Apr 07

The (1) TLS and (2) DTLS implementations in OpenSSL 1.0.1 before 1.0.1g do not properly handle Heartbeat Extension packe

CVE-2016-5195 HIGH POC
7.0 Nov 10

Race condition in mm/gup.c in the Linux kernel 2.x through 4.x before 4.8.3 allows local users to gain privileges by lev

CVE-2013-2423 LOW POC
3.7 Apr 17

Unspecified vulnerability in the Java Runtime Environment (JRE) component in Oracle Java SE 7 Update 17 and earlier, and

CVE-2023-4911 HIGH POC
7.8 Oct 03

Local privilege escalation in the GNU C Library (glibc) dynamic loader ld.so allows unprivileged local users on affected

Share

EUVD-2026-45477 vulnerability details – vuln.today

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy