Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessAuthenticate as local low-privileged user
-
ExploitPlant malicious symlink in target path
-
ExecutionClient extension resolves link during file access
-
ImpactDisclose or tamper protected files
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A01:2025 - Broken Access Control
ASVS 5.0
V5 - File Handling Symlink resolution safety
|
| Exploitation Conditions | Exploitation requires local access to the endpoint running the Tanium Threat Response Client Extension (Endpoint Configuration Toolset Solution / threat-response-cx) with at least low-level authenticated privileges (AV:L, PR:L), plus satisfying an unspecified high-complexity condition (AC:H) that the available sources do not describe - do not assume it is a race or timing window without evidence. No remote or network exploitation is possible, and no user interaction is required (UI:N). The flaw is an improper link-resolution (CWE-59) issue, so exploitation depends on the attacker being able to create or influence a symbolic link in a filesystem location the extension accesses; the sources do not enumerate the exact feature, path, or configuration involved. Limiting factors: local-only vector, required pre-existing low privileges, and the AC:H condition all narrow realistic exploitation to attackers already present on the host. |
| Impact | This is a moderate-severity, locally-exploitable issue rather than an urgent remote threat. The CVSS 6.3 vector (AV:L/AC:H/PR:L/UI:N) confirms the attacker must already have local access to the host with at least low (PR:L, authenticated) privileges, and must overcome a high attack complexity (AC:H) condition - the vector signals severity, not mechanism, and the available sources do not describe what that condition is. Impact is meaningful once triggered: high confidentiality and integrity (C:H/I:H) with no availability impact (A:N), consistent with a CWE-59 symlink/link-resolution flaw that lets a local user read or overwrite files the Threat Response client extension touches with its own privileges. No EPSS score, CISA KEV listing, or public exploit was supplied, so there is no public exploit identified at time of analysis and no evidence of active exploitation; the issue was reported by the vendor (Tanium) itself rather than observed in attacks. The vuln.today decision label is 'this_month', aligning with a patch-on-normal-cycle priority rather than emergency. Net: a legitimate but not top-tier priority - the local-only vector and AC:H substantially limit real-world exploitability, offset by the high C/I impact and the fact that the affected agent typically runs with elevated privileges on managed endpoints. |
| Exploit ScenarioDerived | A local, low-privileged user on a managed endpoint plants a crafted symbolic link in a path the Tanium Threat Response client extension accesses; when the extension resolves the link during a file operation, it is redirected to a file outside its intended scope, letting the attacker read sensitive data or overwrite a protected file using the extension's privileges. The high attack complexity means the attacker must satisfy an additional, source-undescribed condition for the link to be followed at the right moment. No public exploit identified at time of analysis. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 28, 2026
Improper link resolution in the Tanium Threat Response Client Extension (threat-response-cx and the Endpoint Configuration Toolset Solution) allows an authenticated local attacker with low privileges to follow a manipulated link and read or write files outside the intended location, producing high confidentiality and integrity impact with no availability effect. Affected builds include threat-response-cx releases prior to 1.17.802, 1.18.2732, 1.19.2213, 1.20.2271 and 1.21.1673, and Endpoint Configuration Toolset Solution releases prior to 1.51.60, 1.59.50 and 1.71.25. Exploitation is local-only and additionally depends on an unspecified high-complexity condition, so realistic abuse is limited to attackers who already hold a foothold on the endpoint; no public exploit code has been identified at time of analysis.
RemediationAI
Vendor-released patches are available: update Tanium Threat Response Client Extension to 1.17.802, 1.18.2732, 1.19.2213, 1.20.2271 or 1.21.1673 as appropriate for the deployed branch, and update the Endpoint Configuration Toolset Solution to 1.51.60, 1.59.50 or 1.71.25 for the corresponding branch. Consult Tanium advisory TAN-2026-055 (https://security.tanium.com/TAN-2026-055) for the authoritative upgrade instructions and any build-specific guidance; the available sources do not describe a separate workaround, so applying the fixed builds is the documented resolution.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 2 packages in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The flaw is classified as CWE-59, improper link resolution before file access ('link following'), in Tanium's Threat Response Client Extension, which is deployed on managed endpoints as part of the Tanium agent tooling (CPE: tanium:threat-response-cx and tanium:endpoint_configuration_toolset_solution). The extension performs file operations in filesystem locations that a locally present user may be able to influence; if a symbolic link, junction or similar reparse point is placed there, the privileged extension can be induced to resolve the link and operate on a different file than intended. The assessed vector is CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:N, so the attacker must already have local access and low-level authenticated privileges, and must satisfy a high-complexity precondition that the available sources do not describe; that condition should not be assumed to be a race or timing window. No user interaction is required and the scope is unchanged. The sources do not enumerate the specific feature, path or configuration involved, so the precise trigger mechanism remains undocumented. Tanium tracks the issue as TAN-2026-055, and ENISA EUVD records it as EUVD-2026-111260.
Know when Tanium gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:N
CWE-59 link resolution is local (AV:L) and needs an existing local account (PR:L); the source-undescribed trigger condition supports AC:H; it enables file read and overwrite (C:H/I:H) with no availability impact (A:N).
Primary rating from Vendor (Tanium).
CVSS VectorVendor: Tanium
Lifecycle Timeline
1DescriptionCVE.org
Tanium addressed an improper link resolution before file access vulnerability in Threat Response Client Extension.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.
SQL injection in the Tanium Asset module lets an authenticated, high-privilege user read and modify data in the underlyi
Unauthorized OS command execution in Tanium Connect allows an attacker holding low-privilege authenticated access to run
OS command injection in Tanium Connect lets an authenticated, low-privileged user execute arbitrary commands on the unde
Tanium addressed an improper input validation vulnerability in Deploy. [CVSS 8.8 HIGH]
Command injection in Tanium Certificate Manager allows an authenticated attacker with low-level access to execute unauth
Command injection in Tanium Threat Response allows an authenticated low-privilege attacker to execute unauthorized code
SQL injection in Tanium Threat Response (CVSS 3.1 base score 8.8, AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H) allows a low-priv
Path traversal in Tanium Comply allows authenticated low-privileged network users to read files outside the module's int
Path traversal in Tanium Comply exposes all authenticated low-privilege users to a scope-changing arbitrary file write a
SQL injection in Tanium Comply (CWE-89) allows a network-accessible, unauthenticated attacker - contingent on user inter
Improper access controls (CWE-862, Missing Authorization) in Tanium Comply allow an authenticated low-privileged user to
Improper access controls in Tanium Comply allow an authenticated low-privilege user to perform unauthorized operations w
EUVD-2026-111260
GHSA-x2fp-vv8c-cc8h
NVD
CVE.org
EPSS
Exploit-DB