Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessObtain high-privileged local access to host
-
ExploitInject code via iSM code-generation flaw
-
ExecutionService module executes injected code
-
ImpactElevate privileges on host
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A05:2025 - Injection
ASVS 5.0
V1 - Encoding and Sanitization Code injection prevention, sandbox exec
MITRE ATT&CK
2 techniques across 2 tactics: Execution, Initial Access The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Exploitation requires the attacker to already possess high-privileged local access (administrator on Windows, root/elevated on Linux or ESXi) on a host running Dell iDRAC Service Module at a version below 6.1.1.0. There is no network path and no default-configuration remote trigger - the flaw cannot be reached without prior local, privileged foothold, which substantially limits realistic risk to post-compromise scenarios on managed Dell PowerEdge servers. |
| Impact | This is a low-to-moderate real-world priority despite being a code-injection (CWE-94) flaw. The CVSS 3.1 vector (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:L/I:L/A:L, base 4.2) is the dominant signal and it is internally consistent with the description: AV:L confirms local-only access and PR:H confirms the attacker must already hold high privileges on the host, so this is a privilege-boundary escalation rather than a remote compromise. There is no EPSS score, no CISA KEV listing, and no POC in the provided data, so there is no evidence of active or probable exploitation - no public exploit identified at time of analysis. The only decision signal elevating it is the vuln.today 'this_month' label, which is a routine-patch cadence, not act_now or emergency. The impact is uniformly Low across C/I/A and scope is unchanged (S:U), so even successful exploitation yields limited elevation. Note the tag set includes 'RCE', which conflicts with the AV:L local, high-privilege-required reality of this CVE - this reads as a local elevation-of-privilege issue, not remote code execution; treat the RCE label with skepticism. |
| Exploit ScenarioDerived | An attacker who has already obtained high-privileged (administrator/root) local access to a Dell PowerEdge host running the iDRAC Service Module prior to 6.1.1.0 injects attacker-controlled code that the service module generates or executes, gaining elevated privileges on the host. Because CVSS specifies AV:L and PR:H, this is a post-compromise local escalation step, not an initial-access vector. No public exploit code is identified in the available data. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 28, 2026
Improper control of code generation (CWE-94) in Dell iDRAC Service Module (iSM) versions prior to 6.1.1.0 for Windows, Linux, and ESXi lets a high-privileged local attacker inject code and elevate privileges on the host. Because exploitation requires an attacker to already hold administrator or root-level access on the managed server, the flaw is primarily a post-compromise concern rather than a remotely reachable entry point; CVSS is 4.2 (AV:L/PR:H). No public exploit is identified in the available data and the issue is not in CISA KEV, so remediation should be scheduled through normal patch cycles.
RemediationAI
Dell addresses this in DSA-2026-458; upgrade Dell iDRAC Service Module to 6.1.1.0 or later on all Windows, Linux, and ESXi hosts. Vendor-released patch: 6.1.1.0. Verify the installed version on each managed PowerEdge server after the update, since iSM is a separate host component from iDRAC firmware and is not upgraded by a firmware flash. Where the update cannot be applied immediately, the practical exposure reduction comes from tightening local administrative access on managed hosts - restrict administrator/root membership to the minimum set of operators, and audit for unnecessary local privilege - because the vulnerability cannot be reached without a prior high-privileged local foothold. No network-side workaround is identified in the available data, as the vector is local only. Full details and the per-platform update packages are listed in the Dell advisory at https://www.dell.com/support/kbdoc/en-us/000523111/dsa-2026-458-security-update-for-dell-idrac-service-module-vulnerability.
Affected VersionsENISA
Affects your stack
Find out whether the stacks and servers you run are on an affected version.
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
iDRAC Service Module (iSM) is a lightweight Dell host-side agent installed on PowerEdge servers running Windows, Linux, or ESXi that surfaces management data such as the OS name, lifecycle log, iDRAC SNMP alerts, and OS-to-iDRAC communication to the onboard iDRAC controller. The flaw is classified as CWE-94, Improper Control of Generation of Code, meaning code or command content is assembled from data the component does not adequately constrain before it is generated or executed. The CVSS vector AV:L/AC:L/PR:H/UI:N/S:U/C:L/I:L/A:L confirms the trigger is strictly local and requires high privileges, with no user interaction and low confidentiality, integrity, and availability impact confined to the same security scope; the sources do not describe the specific input path or interface through which the injected code is generated, so the exact trigger mechanism remains unconfirmed in the available data. Affected builds are all iSM releases below 6.1.1.0 across the three supported host operating systems.
Know when Dell gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:L/AC:L/PR:H/UI:N/S:U/C:L/I:L/A:L
Description states local access by an already-high-privileged attacker, so AV:L and PR:H; low code-injection impact across C/I/A with unchanged scope.
Primary rating from Vendor (emc).
CVSS VectorVendor: emc
Lifecycle Timeline
2DescriptionCVE.org
Dell iDRAC Service Module (iSM) for Windows, Dell iDRAC Service Module (iSM) for Linux, and Dell iDRAC Service Module (iSM) for ESXi, versions prior to 6.1.1.0, contains an Improper Control of Generation of Code ('Code Injection') vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Code injection occurs when an application accepts user input and passes it directly into a language interpreter or evaluator without proper sanitization.
Remote Code Execution represents the critical moment when an attacker successfully runs arbitrary code on a target system without physical access.
SQL injection vulnerability in d4d/statusFilter.php in Plixer Scrutinizer (aka Dell SonicWALL Scrutinizer) before 9.5.2
The ViewPoint web application in Dell SonicWALL Global Management System (GMS) before 7.2 SP2, SonicWALL Analyzer before
The MySQL component in Plixer Scrutinizer (aka Dell SonicWALL Scrutinizer) 9.0.1.19899 and earlier has a default passwor
Multiple SQL injection vulnerabilities in Dell SonicWall Scrutinizer 11.0.1 allow remote authenticated users to execute
Dell RecoverPoint for Virtual Machines prior to 6.0.3.1 HF1 contains hardcoded credentials (CVE-2026-22769, CVSS 10.0) t
An unrestricted file upload vulnerability exists in Dell (acquired by Quest) KACE K1000 System Management Appliance vers
cgi-bin/admin.cgi in the web console in Plixer Scrutinizer (aka Dell SonicWALL Scrutinizer) before 9.5.0 does not requir
The IPMI 1.5 functionality in Dell iDRAC6 modular before 3.65, iDRAC6 monolithic before 1.98, and iDRAC7 before 1.57.57
The SonicWall Secure Remote Access server (version 8.1.0.2-14sv) is vulnerable to a Remote Command Injection vulnerabili
The SonicWall Secure Remote Access server (version 8.1.0.2-14sv) is vulnerable to two Remote Command Injection vulnerabi
The SonicWall Secure Remote Access server (version 8.1.0.2-14sv) is vulnerable to a Remote Command Injection vulnerabili
This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of EMC Data Protection
EUVD-2026-112027
GHSA-hp89-phq6-r7jr
NVD
CVE.org
Vulnrichment
Exploit-DB