Skip to main content

FUXA CVE-2026-40063

| EUVDEUVD-2026-112582 MEDIUM
Information Exposure (CWE-200)
2026-10-29 talos
5.3
CVSS 3.1 · NVD
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Reach FUXA web service over network
  2. Exploit
    Send crafted HTTP request to /nodered/fuxa/scripts
  3. Execution
    Server returns unintended information
  4. Impact
    Collect leaked data

Vulnerability Assessment

Weakness
CWE
OWASP Top 10:2025
A01:2025 - Broken Access Control
ASVS 5.0
V14 - Data Protection Data exposure prevention
MITRE ATT&CK

2 techniques across 2 tactics: Collection, Discovery

The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up.

Exploitation Conditions

Exploitation requires network reachability to the FUXA web application and the ability to send an HTTP request to the /nodered/fuxa/scripts endpoint; per the CVSS vector (PR:N/UI:N) no authentication or user interaction is needed against version 1.3.2-2809. The description does not name any non-default feature, configuration setting, or deployment mode as a prerequisite, so default exposure of this endpoint appears sufficient. The main limiting factor is deployment exposure: FUXA is typically an internal SCADA/HMI server, so impact is largest only where the instance is reachable from untrusted networks; the data also caps impact at a limited confidentiality leak (C:L) with no integrity or availability effect, and the exact information disclosed is not specified in the sources.

Impact

This is a moderate-severity (CVSS 5.3) information disclosure flaw whose signals are consistent rather than conflicting. The CVSS vector (AV:N/AC:L/PR:N/UI:N) describes a network-reachable, low-complexity, unauthenticated attack with only limited confidentiality impact (C:L) and no integrity or availability effect - so the ceiling on damage is an information leak, not code execution or takeover. The vuln.today decision label is 'this_month,' which is a routine-patching priority rather than act_now or emergency. There is no CISA KEV listing and no EPSS score supplied, so there is no evidence of active or probable exploitation; the only external signal is the Talos vulnerability report, which confirms the research finding but is not listed here as working exploit code. Net assessment: a genuine but bounded issue - worth patching on a normal cycle, not a drop-everything emergency. The low real-world footprint of FUXA (see prevalence) further reduces aggregate risk, though any single internet-exposed FUXA/SCADA instance should be remediated promptly because the attack needs no authentication.

Exploit ScenarioDerived

An unauthenticated attacker who can reach a FUXA instance over the network sends a specially crafted HTTP request to the /nodered/fuxa/scripts endpoint and receives back information that should not be exposed. No public exploit is identified in the provided data, and the exact data disclosed is not detailed in the available sources. Because the request is unauthenticated and network-based with low complexity, exploitation is straightforward wherever the service is reachable.

This Month Plan within 30 days. Why: MEDIUM severity (CVSS 4.0-6.9).
No patch listed yet

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 29, 2026

FUXA 1.3.2-2809 exposes an unauthenticated information disclosure through its /nodered/fuxa/scripts endpoint, allowing remote attackers to read limited data from the SCADA/HMI web application. The CVSS 3.1 score is 5.3 (AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N), so no credentials or user interaction are required and only confidentiality is affected; the exact data leaked is not specified in the available sources. No public exploit code or CISA KEV entry was identified at time of analysis, and the practical risk is highest where the FUXA instance is reachable from untrusted networks.

RemediationAI

No vendor-released patch is identified in the available data; consult the Talos advisory TALOS-2026-2418 (https://talosintelligence.com/vulnerability_reports/TALOS-2026-2418) for vendor guidance and apply a fixed release once one is published. Until then, restrict network access to the FUXA web interface by placing it behind a VPN or management network and limiting source IPs to trusted engineering hosts, because the flaw is reachable over the network without authentication. If the Node-RED integration is not required, block or disable the /nodered/fuxa/scripts endpoint at a reverse proxy or WAF; the trade-off is that this can break Node-RED-related functionality in FUXA, so validate in a staging environment. Monitor HTTP logs for unauthenticated requests to that path to detect attempted exploitation.

Affected VersionsENISA

Frangoteam 1.3.2-2809

Affected Packages

euvd frangoteam no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

FUXA is Frangoteam's web-based SCADA/HMI visualization product, and the affected /nodered/fuxa/scripts path is part of its Node-RED integration functionality. The flaw is classified as CWE-200 (Exposure of Sensitive Information): a crafted HTTP request to that endpoint returns information to an unauthenticated caller, with the CVSS vector confirming network access, low attack complexity, no privileges (PR:N), no user interaction (UI:N), and a limited confidentiality-only impact (C:L, I:N, A:N). The supplied CPE entry cpe:2.3:a:frangoteam:frangoteam:*:*:*:*:*:*:*:* is a wildcard product entry, while the description pins the affected build to FUXA 1.3.2-2809; the trigger is the HTTP request to the endpoint, and the precise information returned is not described in the available sources. Because FUXA is commonly deployed as an internal SCADA/HMI server, exposure depends heavily on whether the web interface is reachable from untrusted networks.

Know when Frangoteam gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (talos) PRIMARY MEDIUM
NVD 5.3 MEDIUM
AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N
vuln.today AI 5.3 MEDIUM

Unauthenticated (PR:N), network-reachable (AV:N) HTTP request with low complexity (AC:L) yielding only limited information disclosure (C:L), with no integrity or availability impact.

3.1 AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N
4.0 AV:N/AC:L/AT:N/PR:N/UI:N/VC:L/VI:N/VA:N/SC:N/SI:N/SA:N

Primary rating from Vendor (talos).

CVSS VectorNVD

Attack Vector
Network
Attack Complexity
Low
Privileges Required
None
User Interaction
None
Scope
Unchanged
Confidentiality
Low
Integrity
None
Availability
None

DescriptionNVD

A information disclosure vulnerability exists in the /nodered/fuxa/scripts functionality of FUXA (version(s): 1.3.2-2809). A specially crafted HTTP request can lead to an information leak. An attacker can make an unauthenticated HTTP request to trigger this vulnerability.

Threat Intelligence Overview

Prevalence
Low
niche open-source SCADA/HMI product, limited industrial deployment footprint
Social Media
2
Sightings
Data Quality
3 sources
Confidence: Low

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity MEDIUM
CISA KEV No
Public POC No
EPSS N/A
Patch available No
Active threat No
Deciding rule
MEDIUM severity (CVSS 4.0-6.9)
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision· derived
Scheduled
Exploitation· derived
None
System Exposure· derived
Open
Automatable· derived
Yes
Human Impact· derived
Medium

Priority Score

26
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +26
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.

Related Vulnerabilities in FUXA Authorization Bypass and Info Disclosure

View all 3
CVE-2025-69971 CRITICAL POC
9.8 Feb 03

FUXA v1.2.7 has hard-coded JWT credentials (EPSS 4.8%) that allow attackers to forge authentication tokens and bypass al

CVE-2025-69985 CRITICAL POC
9.8 Feb 24

Authentication bypass in FUXA SCADA/HMI system 1.2.8 and prior leading to Remote Code Execution. Unauthenticated attacke

CVE-2026-25895 CRITICAL POC
9.8 Feb 09

FUXA SCADA has a path traversal vulnerability — ninth critical vulnerability enabling arbitrary file access on SCADA ser

CVE-2023-31719 CRITICAL POC
9.8 Sep 22

FUXA <= 1.1.12 is vulnerable to SQL Injection via /api/signin. Rated critical severity (CVSS 9.8), this vulnerability is

CVE-2023-33831 CRITICAL POC
9.8 Sep 18

A remote command execution (RCE) vulnerability in the /api/runscript endpoint of FUXA 1.1.13 allows attackers to execute

CVE-2023-31718 HIGH POC
7.5 Sep 22

FUXA <= 1.1.12 is vulnerable to Local via Inclusion via /api/download. Rated high severity (CVSS 7.5), this vulnerabilit

CVE-2023-31717 HIGH POC
7.5 Sep 22

A SQL Injection attack in FUXA <= 1.1.12 allows exfiltration of confidential information from the database. Rated high s

CVE-2026-13207 HIGH
8.7 Jun 30

Authentication bypass in FUXA SCADA/HMI versions 1.3.1 and prior lets remote unauthenticated attackers reach protected R

CVE-2025-69983 CRITICAL
9.8 Feb 03

FUXA v1.2.7 allows remote code execution through the project import functionality by importing crafted project files con

CVE-2026-25893 CRITICAL
9.8 Feb 09

FUXA SCADA has yet another authorization bypass — now the seventh critical FUXA vulnerability discovered, enabling unaut

CVE-2026-25938 CRITICAL
9.8 Feb 09

FUXA SCADA has an authentication spoofing vulnerability from versions 1.2.8 through 1.2.10 — tenth critical vulnerabilit

CVE-2026-25894 CRITICAL
9.8 Feb 09

FUXA SCADA has insecure default configuration with a known JWT secret — eighth critical vulnerability.

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy