Skip to main content

FUXA CVE-2026-42949

| EUVDEUVD-2026-112583 MEDIUM
Improper Authorization (CWE-285)
2026-10-29 talos
5.6
CVSS 3.1 · NVD
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Locate network-reachable FUXA server
  2. Exploit
    Craft unauthenticated request to /api/runscript
  3. Execution
    Bypass authorization check
  4. Impact
    Invoke privileged script operation

Vulnerability Assessment

Weakness
CWE
OWASP Top 10:2025
A01:2025 - Broken Access Control
ASVS 5.0
V8 - Authorization Authorization verification
MITRE ATT&CK

1 technique across 1 tactic: Defense Evasion

The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up.

Exploitation Conditions

Exploitation requires a FUXA 1.3.2-2809 instance whose HTTP interface - specifically the /api/runscript endpoint - is reachable by the attacker; per the CVSS vector's PR:N no authentication is needed and no user interaction is required. The practical limiting factor is exposure: FUXA is typically deployed as an HMI/SCADA front-end on internal OT/engineering networks rather than internet-facing, so reachability is the main gate. The sources do not describe the exact malformation that makes the request 'specially crafted', so the specific trigger condition behind the input's AC:H rating is not described in the available sources.

Impact

This is a medium-severity (CVSS 5.6) authorization-bypass issue (CWE-285) in FUXA's /api/runscript endpoint. The provided CVSS vector (AV:N/PR:N/UI:N) is the concerning part: it is network-reachable and, per the vector's PR:N, unauthenticated with no user interaction, which normally argues for prioritization. However, several signals pull the real-world urgency down: the supplied vector sets AC:H and caps all three impacts at Low (C:L/I:L/A:L), the vuln.today decision label is 'this_month' (not act_now/emergency), and there is no EPSS score, no CISA KEV listing, and no confirmed public exploit code in the input. Note a tension to verify with the vendor/Talos: the vector marks AC:H, yet the description characterizes the trigger as a single 'specially crafted' unauthenticated HTTP request, which reads as low complexity - the AC:H justification is not explained in the available sources. Also note the impact rating (all Low) seems conservative for an endpoint literally named 'runscript' that 'executes a privileged operation'; if that endpoint can run server-side scripts, real integrity/availability impact could be higher, but the sources do not confirm the scope of what the script can do. Net: a legitimate, verified Talos-reported flaw worth patching on a normal cycle rather than an emergency, with footprint concentrated in environments actually running this niche SCADA/HMI product.

Exploit ScenarioDerived

An attacker with network access to a FUXA 1.3.2-2809 instance sends a crafted, unauthenticated HTTP request directly to the /api/runscript endpoint, bypassing the authorization check and invoking a privileged operation that should require authentication. No public exploit code is confirmed in the sources, though Talos report TALOS-2026-2417 documents the vulnerability.

This Month Plan within 30 days. Why: MEDIUM severity (CVSS 4.0-6.9).
No patch listed yet

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 29, 2026

Authorization bypass in FUXA 1.3.2-2809 lets an unauthenticated remote attacker invoke privileged operations through the /api/runscript endpoint. The issue is rated CVSS 5.6 medium with low confidentiality, integrity and availability impact; the independent assessment treats it as AV:N/AC:L/PR:N/UI:N, although the supplied vector records AC:H and the sources do not describe the specific request malformation. No public exploit identified at time of analysis and no CISA KEV confirmation is present in the provided data, with practical risk gated mainly by whether the FUXA HTTP interface is reachable from an attacker's network.

RemediationAI

No vendor-released patch is identified in the provided data; track Talos advisory TALOS-2026-2417 (https://talosintelligence.com/vulnerability_reports/TALOS-2026-2417) and the FUXA project for a fixed release. Until a patch is available, reduce exposure by placing the FUXA HTTP interface behind a VPN or an authenticated reverse proxy/API gateway so /api/runscript is not reachable by unauthenticated clients, and by segmenting FUXA HMI/SCADA hosts away from untrusted networks; the trade-off is that remote engineering access requires the VPN/proxy and existing unauthenticated integrations may break. If legitimate workflows do not use server-side script execution, deny or block POST requests to /api/runscript at the reverse proxy or WAF, accepting that this disables the runscript feature and may break automation that depends on it.

Affected VersionsENISA

Frangoteam 1.3.2-2809

Affected Packages

euvd frangoteam no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

FUXA is an open-source web-based HMI/SCADA visualization application maintained by FrangoTeam; the CPE cpe:2.3:a:frangoteam:frangoteam:*:*:*:*:*:*:*:* identifies the FrangoTeam product line, and the Talos report TALOS-2026-2417 ties the flaw to version 1.3.2-2809. CWE-285 (Improper Authorization) indicates that the /api/runscript endpoint does not enforce the authorization check required before performing a privileged operation, allowing an HTTP request to reach script-execution functionality without authentication. The provided sources do not specify the exact malformed request or server-side condition that makes exploitation specially crafted; they also do not explain the AC:H value in the supplied CVSS vector, whereas the independent assessment rates AC:L and PR:N/UI:N. No evidence in the input assigns this issue to a specific library, protocol, or deployment mode beyond the FUXA web API.

Know when Frangoteam gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (talos) PRIMARY MEDIUM
NVD 5.6 MEDIUM
AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:L
vuln.today AI 7.3 HIGH

Unauthenticated single HTTP request to a network endpoint supports AV:N/PR:N/UI:N and AC:L (not the input's AC:H, which the sources do not justify); impacts kept Low as the sources do not confirm broader script capability.

3.1 AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L
4.0 AV:N/AC:L/AT:N/PR:N/UI:N/VC:L/VI:L/VA:L/SC:N/SI:N/SA:N

Primary rating from Vendor (talos).

CVSS VectorNVD

Attack Vector
Network
Attack Complexity
High
Privileges Required
None
User Interaction
None
Scope
Unchanged
Confidentiality
Low
Integrity
Low
Availability
Low

DescriptionNVD

A authorization bypass vulnerability exists in the /api/runscript functionality of FUXA (version(s): 1.3.2-2809). A specially crafted HTTP request can lead to execute priviledged operation. An attacker can make an unauthenticated HTTP request to trigger this vulnerability.

Threat Intelligence Overview

Prevalence
Low
niche open-source SCADA/HMI product, limited enterprise footprint
Social Media
2
Sightings
Data Quality
3 sources
Confidence: Low

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity MEDIUM
CISA KEV No
Public POC No
EPSS N/A
Patch available No
Active threat No
Deciding rule
MEDIUM severity (CVSS 4.0-6.9)
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision· derived
Scheduled
Exploitation· derived
None
System Exposure· derived
Open
Automatable· derived
No
Human Impact· derived
Medium

Priority Score

28
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +28
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

Authentication bypass attacks exploit flaws in the verification mechanisms that control access to systems and applications.

Related Vulnerabilities in FUXA Authorization Bypass and Info Disclosure

View all 3
CVE-2025-69971 CRITICAL POC
9.8 Feb 03

FUXA v1.2.7 has hard-coded JWT credentials (EPSS 4.8%) that allow attackers to forge authentication tokens and bypass al

CVE-2025-69985 CRITICAL POC
9.8 Feb 24

Authentication bypass in FUXA SCADA/HMI system 1.2.8 and prior leading to Remote Code Execution. Unauthenticated attacke

CVE-2026-25895 CRITICAL POC
9.8 Feb 09

FUXA SCADA has a path traversal vulnerability — ninth critical vulnerability enabling arbitrary file access on SCADA ser

CVE-2023-31719 CRITICAL POC
9.8 Sep 22

FUXA <= 1.1.12 is vulnerable to SQL Injection via /api/signin. Rated critical severity (CVSS 9.8), this vulnerability is

CVE-2023-33831 CRITICAL POC
9.8 Sep 18

A remote command execution (RCE) vulnerability in the /api/runscript endpoint of FUXA 1.1.13 allows attackers to execute

CVE-2023-31718 HIGH POC
7.5 Sep 22

FUXA <= 1.1.12 is vulnerable to Local via Inclusion via /api/download. Rated high severity (CVSS 7.5), this vulnerabilit

CVE-2023-31717 HIGH POC
7.5 Sep 22

A SQL Injection attack in FUXA <= 1.1.12 allows exfiltration of confidential information from the database. Rated high s

CVE-2026-13207 HIGH
8.7 Jun 30

Authentication bypass in FUXA SCADA/HMI versions 1.3.1 and prior lets remote unauthenticated attackers reach protected R

CVE-2025-69983 CRITICAL
9.8 Feb 03

FUXA v1.2.7 allows remote code execution through the project import functionality by importing crafted project files con

CVE-2026-25893 CRITICAL
9.8 Feb 09

FUXA SCADA has yet another authorization bypass — now the seventh critical FUXA vulnerability discovered, enabling unaut

CVE-2026-25938 CRITICAL
9.8 Feb 09

FUXA SCADA has an authentication spoofing vulnerability from versions 1.2.8 through 1.2.10 — tenth critical vulnerabilit

CVE-2026-25894 CRITICAL
9.8 Feb 09

FUXA SCADA has insecure default configuration with a known JWT secret — eighth critical vulnerability.

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy