Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessLocate network-reachable FUXA server
-
ExploitCraft unauthenticated request to /api/runscript
-
ExecutionBypass authorization check
-
ImpactInvoke privileged script operation
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A01:2025 - Broken Access Control
ASVS 5.0
V8 - Authorization Authorization verification
MITRE ATT&CK
1 technique across 1 tactic: Defense Evasion The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Exploitation requires a FUXA 1.3.2-2809 instance whose HTTP interface - specifically the /api/runscript endpoint - is reachable by the attacker; per the CVSS vector's PR:N no authentication is needed and no user interaction is required. The practical limiting factor is exposure: FUXA is typically deployed as an HMI/SCADA front-end on internal OT/engineering networks rather than internet-facing, so reachability is the main gate. The sources do not describe the exact malformation that makes the request 'specially crafted', so the specific trigger condition behind the input's AC:H rating is not described in the available sources. |
| Impact | This is a medium-severity (CVSS 5.6) authorization-bypass issue (CWE-285) in FUXA's /api/runscript endpoint. The provided CVSS vector (AV:N/PR:N/UI:N) is the concerning part: it is network-reachable and, per the vector's PR:N, unauthenticated with no user interaction, which normally argues for prioritization. However, several signals pull the real-world urgency down: the supplied vector sets AC:H and caps all three impacts at Low (C:L/I:L/A:L), the vuln.today decision label is 'this_month' (not act_now/emergency), and there is no EPSS score, no CISA KEV listing, and no confirmed public exploit code in the input. Note a tension to verify with the vendor/Talos: the vector marks AC:H, yet the description characterizes the trigger as a single 'specially crafted' unauthenticated HTTP request, which reads as low complexity - the AC:H justification is not explained in the available sources. Also note the impact rating (all Low) seems conservative for an endpoint literally named 'runscript' that 'executes a privileged operation'; if that endpoint can run server-side scripts, real integrity/availability impact could be higher, but the sources do not confirm the scope of what the script can do. Net: a legitimate, verified Talos-reported flaw worth patching on a normal cycle rather than an emergency, with footprint concentrated in environments actually running this niche SCADA/HMI product. |
| Exploit ScenarioDerived | An attacker with network access to a FUXA 1.3.2-2809 instance sends a crafted, unauthenticated HTTP request directly to the /api/runscript endpoint, bypassing the authorization check and invoking a privileged operation that should require authentication. No public exploit code is confirmed in the sources, though Talos report TALOS-2026-2417 documents the vulnerability. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 29, 2026
Authorization bypass in FUXA 1.3.2-2809 lets an unauthenticated remote attacker invoke privileged operations through the /api/runscript endpoint. The issue is rated CVSS 5.6 medium with low confidentiality, integrity and availability impact; the independent assessment treats it as AV:N/AC:L/PR:N/UI:N, although the supplied vector records AC:H and the sources do not describe the specific request malformation. No public exploit identified at time of analysis and no CISA KEV confirmation is present in the provided data, with practical risk gated mainly by whether the FUXA HTTP interface is reachable from an attacker's network.
RemediationAI
No vendor-released patch is identified in the provided data; track Talos advisory TALOS-2026-2417 (https://talosintelligence.com/vulnerability_reports/TALOS-2026-2417) and the FUXA project for a fixed release. Until a patch is available, reduce exposure by placing the FUXA HTTP interface behind a VPN or an authenticated reverse proxy/API gateway so /api/runscript is not reachable by unauthenticated clients, and by segmenting FUXA HMI/SCADA hosts away from untrusted networks; the trade-off is that remote engineering access requires the VPN/proxy and existing unauthenticated integrations may break. If legitimate workflows do not use server-side script execution, deny or block POST requests to /api/runscript at the reverse proxy or WAF, accepting that this disables the runscript feature and may break automation that depends on it.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
FUXA is an open-source web-based HMI/SCADA visualization application maintained by FrangoTeam; the CPE cpe:2.3:a:frangoteam:frangoteam:*:*:*:*:*:*:*:* identifies the FrangoTeam product line, and the Talos report TALOS-2026-2417 ties the flaw to version 1.3.2-2809. CWE-285 (Improper Authorization) indicates that the /api/runscript endpoint does not enforce the authorization check required before performing a privileged operation, allowing an HTTP request to reach script-execution functionality without authentication. The provided sources do not specify the exact malformed request or server-side condition that makes exploitation specially crafted; they also do not explain the AC:H value in the supplied CVSS vector, whereas the independent assessment rates AC:L and PR:N/UI:N. No evidence in the input assigns this issue to a specific library, protocol, or deployment mode beyond the FUXA web API.
Know when Frangoteam gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:L
Unauthenticated single HTTP request to a network endpoint supports AV:N/PR:N/UI:N and AC:L (not the input's AC:H, which the sources do not justify); impacts kept Low as the sources do not confirm broader script capability.
Primary rating from Vendor (talos).
CVSS VectorNVD
DescriptionNVD
A authorization bypass vulnerability exists in the /api/runscript functionality of FUXA (version(s): 1.3.2-2809). A specially crafted HTTP request can lead to execute priviledged operation. An attacker can make an unauthenticated HTTP request to trigger this vulnerability.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Authentication bypass attacks exploit flaws in the verification mechanisms that control access to systems and applications.
Related Vulnerabilities in FUXA Authorization Bypass and Info Disclosure
View all 3More in Frangoteam
View allFUXA v1.2.7 has hard-coded JWT credentials (EPSS 4.8%) that allow attackers to forge authentication tokens and bypass al
Authentication bypass in FUXA SCADA/HMI system 1.2.8 and prior leading to Remote Code Execution. Unauthenticated attacke
FUXA SCADA has a path traversal vulnerability — ninth critical vulnerability enabling arbitrary file access on SCADA ser
FUXA <= 1.1.12 is vulnerable to SQL Injection via /api/signin. Rated critical severity (CVSS 9.8), this vulnerability is
A remote command execution (RCE) vulnerability in the /api/runscript endpoint of FUXA 1.1.13 allows attackers to execute
FUXA <= 1.1.12 is vulnerable to Local via Inclusion via /api/download. Rated high severity (CVSS 7.5), this vulnerabilit
A SQL Injection attack in FUXA <= 1.1.12 allows exfiltration of confidential information from the database. Rated high s
Authentication bypass in FUXA SCADA/HMI versions 1.3.1 and prior lets remote unauthenticated attackers reach protected R
FUXA v1.2.7 allows remote code execution through the project import functionality by importing crafted project files con
FUXA SCADA has yet another authorization bypass — now the seventh critical FUXA vulnerability discovered, enabling unaut
FUXA SCADA has an authentication spoofing vulnerability from versions 1.2.8 through 1.2.10 — tenth critical vulnerabilit
FUXA SCADA has insecure default configuration with a known JWT secret — eighth critical vulnerability.
EUVD-2026-112583
NVD
CVE.org
GitHub PoC
Exploit-DB