Unauthorized BLE command injection against the Pulsetto Vagus Nerve Stimulator firmware allows any physically proximate attacker to invoke hidden device commands without authentication or encryption, with potential to alter stimulation parameters or disrupt device operation. The firmware processes a set of undisclosed commands - never exposed through the official companion mobile application - whenever the device is powered on and advertising over BLE, presenting a zero-authentication attack surface at the radio layer. No public exploit code has been identified at time of analysis, but the adjacent-only, no-authentication requirement makes opportunistic abuse practical in any clinical or public setting where patients wear the device.
Remote code execution via double free (CWE-415) in the Windows Secure Socket Tunneling Protocol (SSTP) service enables a network-adjacent, unauthenticated attacker to corrupt heap memory and execute arbitrary code. The vulnerability spans virtually every supported Windows Server and Windows 10/11 release, from Server 2012 through Server 2025 and Windows 11 26H1, making the remediation footprint extremely broad. No public exploit code or CISA KEV listing has been identified at time of analysis; however, the CVSS AC:H rating indicates exploitation requires specific race or protocol conditions rather than a trivial spray-and-pray approach.
Privilege escalation via heap-based buffer overflow in the Windows Kernel (CWE-122) affects a broad span of Windows 10, Windows 11, and Windows Server releases from 2016 through 2025. An authenticated local attacker exploiting this flaw can gain SYSTEM-level privileges, achieving full control over confidentiality, integrity, and availability of the target system. No public exploit code and no active exploitation (CISA KEV) have been identified at time of analysis; a vendor patch is available.
Remote code execution in Microsoft SharePoint Server allows a network-authenticated attacker with low-level privileges to execute arbitrary code by exploiting unsafe deserialization of attacker-controlled data. Both SharePoint Server 2019 and the Subscription Edition are confirmed affected, with patches available from Microsoft. No public exploit code or CISA KEV listing has been identified at time of analysis, but the low complexity and full-triad impact (C:H/I:H/A:H) make this a high-priority patching target for enterprise environments.
Mira hormone monitor device firmware exposes an unauthenticated BLE characteristic write path that forces the device into bootloader mode when any adjacent BLE central sends a 0x01 value, with no credential verification required. Disclosed via CISA ICS Medical Advisory ICSMA-26-223-01, the vulnerability maps to CWE-306 (Missing Authentication for Critical Function) and carries a CVSS 4.0 score of 7.1 with high availability impact. No public exploit code has been identified and the vulnerability is not listed in CISA KEV, but the attack requires only commodity BLE hardware and physical proximity.
Authorization bypass in Malcolm (all versions prior to 26.07.0) allows authenticated low-privilege users to access restricted backend endpoints by exploiting a URI normalization mismatch between Nginx's routing layer and the OpenResty Lua RBAC enforcement layer. By prepending a traversal segment (e.g., `/x/../upload/...`) to a request path, the Lua role check evaluates the raw unnormalized URI, fails to match any configured rule, and falls open - granting access the policy should deny. No public exploit has been identified at time of analysis, and CISA has released a fix in v26.07.0.
Remote code execution in Microsoft Office SharePoint exploits unsafe deserialization of attacker-controlled data over the network. An authenticated attacker with low-level network access can submit a crafted serialized payload that SharePoint deserializes without sufficient validation, resulting in full compromise of confidentiality, integrity, and availability. No public exploit has been identified at time of analysis, but the low attack complexity and high impact across all three security properties make this a critical remediation priority.
Remote code execution in Microsoft Office SharePoint enables any authenticated low-privileged user to execute arbitrary code on the server by submitting maliciously crafted serialized data over the network. The CVSS 3.1 vector (AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H) confirms the attack requires no user interaction, low complexity, and only a standard SharePoint account - making this straightforward to weaponize within any organization whose SharePoint is network-accessible to internal users or external authenticated parties. No public exploit code or CISA KEV listing is identified at time of analysis, though SharePoint deserialization vulnerabilities have historically attracted rapid weaponization.
Remote code execution in Microsoft Office SharePoint allows an attacker authenticated with low privileges to execute arbitrary code over a network via unsafe deserialization of user-controlled data. The CVSS 3.1 vector (AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H) confirms full confidentiality, integrity, and availability impact with no user interaction required. No public exploit code has been identified at time of analysis, and SharePoint is not currently listed in the CISA KEV catalog based on available data.
Remote code execution in FileRun ≤2026.2.0 is achievable by any authenticated user who can upload files, exploiting a shell command injection flaw in the thumbnail generation pipeline. The subsystem passes uploaded filenames wrapped in double-quotes directly to exec() without escapeshellarg() sanitization, meaning filenames such as $(PAYLOAD).mp4 survive the filename sanitizer and are evaluated as shell commands when ffmpeg, ImageMagick, vips, or stl-thumb processes the upload. Vendor-released patch 2026.2.1 is available; no CISA KEV listing or public exploit code has been identified at time of analysis, but the low-complexity, authenticated-only barrier makes this a high-priority patch target for any FileRun deployment.
Remote code execution in Microsoft SharePoint allows any authenticated, low-privileged network attacker to execute arbitrary code on the server by exploiting unsafe deserialization of attacker-controlled data (CWE-502). Three on-premises SharePoint Server product lines are confirmed affected - Enterprise Server 2016, Server 2019, and Server Subscription Edition - with fixed builds available from Microsoft. No public exploit code has been identified at time of analysis, but the low attack complexity and precedent of prior SharePoint deserialization CVEs being rapidly weaponized (e.g., CVE-2019-0604) make this a high-priority patching target for any organization running on-premises SharePoint.
Remote code execution in Microsoft SharePoint Server exposes organizations to full system compromise via deserialization of attacker-controlled data submitted over the network. Versions across three SharePoint Server editions (Subscription Edition, 2019, and Enterprise 2016) are confirmed affected, all requiring only a low-privileged authenticated account to exploit. No public exploit code or CISA KEV listing is identified at time of analysis, but the low attack complexity and high impact across confidentiality, integrity, and availability make this a critical-priority remediation item for any enterprise SharePoint deployment.
Hardcoded AES encryption in Siemens LOGO! Soft Comfort (all versions before V9) exposes every password-protected project file to decryption without knowledge of any user-defined password. A local attacker who can access the application installation - via shared workstation access, insider position, or post-compromise foothold - can extract the static master key from binaries or process memory and apply it universally to any project file ever encrypted by the affected software. No public exploit has been identified at time of analysis, and the vulnerability is not listed in the CISA KEV catalog.
LOGO! Soft Comfort, Siemens' programming environment for LOGO! small programmable logic controllers, stores project protection passwords as unsalted SHA-256 hashes, enabling efficient offline recovery attacks against anyone who obtains a project file. All versions prior to V9 are affected according to Siemens advisory SSA-751328. An attacker who acquires the project file - through file system access, network share exposure, backup theft, or insider access - can bypass password protection by cracking the hash offline without rate-limiting or account lockout constraints. No public exploit has been identified at time of analysis, and exploitation is not confirmed in CISA KEV.
Remote code execution in Microsoft Active Directory Certificate Services (AD CS) is achievable by low-privileged authenticated network attackers through a use-after-free (CWE-416) memory corruption flaw. All supported Windows Server versions from 2012 through 2025 are affected, along with Windows 10 versions 1607 and 1809. Microsoft has released patches via the MSRC update guide; no public exploit code or CISA KEV listing has been identified at time of analysis, though the low attack complexity and broad version coverage make this a high-priority remediation item.
Privilege escalation in Microsoft High Performance Computing (HPC) Pack allows a network-authenticated attacker with low-privilege access to elevate privileges to a higher level, potentially achieving full system compromise. The flaw stems from CWE-250 (Execution with Unnecessary Privileges), meaning a component within HPC Pack runs with more rights than its function requires, providing a lever for a legitimately authenticated user to abuse. No public exploit code has been identified at time of analysis and this vulnerability is not listed in the CISA KEV catalog, but the CVSS 8.8 score and full C/I/A impact triad indicate a serious risk in any environment where untrusted low-privilege users have network access to HPC Pack services.
Remote code execution in Windows SMB Server is achievable by a network-authenticated attacker exploiting a heap-based buffer overflow (CWE-122). The CVSS vector (AV:N/AC:L/PR:L/UI:N) confirms that low-privileged, network-accessible credentials are sufficient - no user interaction or elevated rights are required. The vulnerability affects a broad range of Windows client and server releases from Windows Server 2012 through Windows 11 26H2 and Windows Server 2025, with vendor patches now available. No public exploit code or CISA KEV listing has been identified at time of analysis.
Remote code execution in Microsoft's Local Security Authority Server (lsasrv) affects virtually every supported Windows client and server release, from Windows Server 2012 through Server 2025 and Windows 10 through Windows 11 26H1. The heap-based buffer overflow (CWE-122) is reachable over the network by any low-privileged authenticated attacker - aligning with the CVSS PR:L designation and the description's 'authorized attacker' language - enabling full system compromise. No public exploit identified at time of analysis; vendor patch is available via MSRC.
Remote code execution in Microsoft Dynamics 365 on-premises is achievable by any authenticated low-privileged user via a crafted deserialization payload sent over the network, yielding full confidentiality, integrity, and availability compromise of the affected host. The root cause is CWE-502 (Deserialization of Untrusted Data), a class of vulnerability historically weaponized effectively in .NET-based enterprise applications through gadget chains. No public exploit code or CISA KEV listing was identified at the time of analysis, but the combination of low attack complexity, low privilege requirement, and high CIA impact makes this a credible, high-priority remediation target for organizations running Dynamics 365 on-premises.
Heap-based buffer overflow in the Windows LDAP client implementation enables remote code execution against any Windows system that initiates an LDAP connection to an attacker-controlled server. The vulnerability spans an exceptionally wide set of affected Windows versions - from Windows Server 2012 through Windows 11 26H1 and Windows Server 2025 - making the potential attack surface very large. Microsoft has released patches via the standard update channel; no public exploit code or CISA KEV listing has been identified at time of analysis, though the PR:N/UI:R vector and high CIAlll impact make this a credible priority for patching.
Command injection in Windows Active Directory enables network-based remote code execution against a broad range of Windows client and server versions, from legacy Server 2012 through Windows 11 26H1 and Server 2025. With a CVSS 8.8 and a vector of AV:N/AC:L/PR:N/UI:R, an unauthenticated remote attacker can execute arbitrary commands on affected systems when a local user performs a triggering action - such as processing a crafted request or interacting with attacker-controlled content that reaches the vulnerable AD component. No public exploit or CISA KEV listing has been identified at time of analysis, but Microsoft has released patches across all affected branches.
Privilege escalation in Microsoft SharePoint Server (2016 Enterprise, 2019, and Subscription Edition) allows a low-privileged authenticated attacker to gain elevated access over the network by invoking a critical internal function that lacks proper authentication enforcement. The flaw (CWE-306) is exploitable with low complexity and no user interaction, resulting in full confidentiality, integrity, and availability impact. No public exploit code or CISA KEV listing has been identified at time of analysis, but the low exploitation complexity against a widely-deployed enterprise platform makes this a priority patching target.
Protection mechanism failure in Intel Data Center Attestation Primitives (Intel DCAP) enables unauthenticated network-based attackers with specialized internal knowledge to undermine the integrity of the attestation system and expose confidential data from downstream systems relying on SGX enclave verification. The vulnerability (CWE-693) is particularly impactful in confidential computing environments where DCAP serves as the trust anchor for SGX workload isolation. No public exploit has been identified at time of analysis, and Intel has published advisory INTEL-SA-01449 addressing this issue.
SQL injection in Microsoft Entra Connect (versions 1.0.0 through below 2.6.84.0) enables local low-privileged users to escalate privileges on the host system, achieving full confidentiality, integrity, and availability impact. The CVSS vector (AV:L/PR:L) confirms that physical or remote shell access with a standard user account is the entry point - no administrative rights required to trigger the flaw. No public exploit code or CISA KEV listing has been identified at time of analysis, though the low attack complexity and high impact make this a credible lateral-movement or persistence risk in hybrid identity environments.
Account takeover in n8n before 2.32.1 (and before 2.31.5 in the prior release line) is enabled by two simultaneous omissions in the Token Exchange Embed Login feature: the platform accepts an incoming JWT's email claim without confirming the issuer has cryptographically verified that address, and it does not enforce the trusted key's configured role ceiling against the matched local account. An attacker able to obtain any validly-signed token from a configured trusted issuer - including issuers that routinely emit unverified email addresses as part of their standard flows - can present that token with a victim user's email and be granted a fully authenticated n8n session with complete account control. No public exploit has been identified at time of analysis; however, the vulnerability is exploitable in straightforward steps once both deployment preconditions are satisfied.
Privilege escalation in Microsoft Exchange Server 2016, 2019, and Subscription Edition allows authenticated network attackers to gain elevated privileges through resource injection (CWE-99), earning a CVSS 8.8 High rating with total technical impact across confidentiality, integrity, and availability. Affected deployment tracks span Exchange 2016 CU23 (below 15.01.2507.072), Exchange 2019 CU14 and CU15, and Exchange SE RTM, with vendor patches confirmed available for all tracks. No public exploit code has been identified at time of analysis, and SSVC assessment reports no observed exploitation, though the authenticated-only barrier is easily bypassed via credential theft and the total SSVC technical impact classification warrants prompt action.
Remote code execution in PrefectHQ Prefect through version 3.8.2 allows authenticated users to inject arbitrary git arguments via the unsanitized `branch` field of the `git_clone` pull step, enabling arbitrary command execution on the Prefect server. This vulnerability is a distinct bypass of the incomplete fix applied for CVE-2026-5366, meaning the earlier remediation left the underlying code path exploitable by a different injection technique. No public exploit or CISA KEV listing has been identified at time of analysis, but the low-complexity network vector and authenticated-user scope make this high-priority for any organization running self-hosted Prefect orchestration infrastructure.
Code injection (CWE-94) in Microsoft SharePoint Server exposes authenticated network users to high-impact compromise across confidentiality, integrity, and availability on unpatched servers running SharePoint 2016 Enterprise, 2019, or Subscription Edition. The CVSS 8.8 rating (AV:N/AC:L/PR:L) reflects network exploitation requiring only low-privileged credentials, though the CVE description characterizes the primary effect as spoofing rather than full remote code execution - a tension that deserves verification against the Microsoft MSRC advisory. No public exploit code and no CISA KEV listing have been identified at time of analysis, and SSVC rates exploitation as none and automatable as no, moderating the immediate response urgency.
Remote code execution in ZoneMinder 1.39.17 and earlier allows any authenticated user - regardless of assigned role - to execute arbitrary OS commands by exploiting a broken permission check in the Filter class. The flaw arises because `canEdit()` and `canDelete()` invoke nonexistent methods on the `ZM\User` class, causing PHP's `__call()` magic method to silently return a truthy value and bypass all role-based authorization for filter operations. No public exploit code or CISA KEV listing has been identified at time of analysis, but the extremely low exploitation bar - any valid account suffices - makes this a high-priority remediation target for all ZoneMinder deployments.
Remote code execution in Fusio 8.8.3 allows authenticated Developer-role users to escape the PHP-Sandbox and execute arbitrary OS commands on the server. The root cause is a CWE-78 OS Command Injection flaw: the sandbox allow-list permits PHP functions that transitively invoke system(), enabling full sandbox escape. With a valid Developer-role account, an attacker can achieve complete server compromise. No public exploit code and no CISA KEV listing have been identified at time of analysis, though the low attack complexity and network accessibility elevate priority for any Fusio deployment where Developer accounts are granted to untrusted parties.
Remote code execution is achievable in Windows SMB Server via a heap-based buffer overflow exploitable by a low-privileged, authenticated network attacker. The vulnerability (CWE-122) spans a wide range of Microsoft Windows client and server releases from Windows Server 2012 through Windows Server 2025 and Windows 10/11. Microsoft has released patches via the MSRC update guide; no KEV listing or public exploit code is present in the available intelligence at time of analysis.
Remote code execution in Microsoft Office Outlook stems from an integer overflow or wraparound condition (CWE-190) that allows an unauthenticated network attacker to execute arbitrary code on a victim's system, achieving full confidentiality, integrity, and availability compromise. The CVSS 3.1 score of 8.8 (High) with vector AV:N/AC:L/PR:N/UI:R reflects low attack complexity and no authentication requirement, though exploitation is gated by a user interaction step. No public exploit code and no CISA KEV listing have been identified at time of analysis, but the attack profile is consistent with phishing-delivered malicious email or attachment campaigns targeting Outlook users.
Remote code execution is possible in Windows GDI+ across a broad range of Windows 10, 11, and Windows Server versions due to an integer overflow that leads to a heap-based buffer overflow (CWE-122). Network-based attackers with no privileges required can exploit this by delivering a crafted image or graphic file, requiring only that the victim open or preview the content. A vendor patch is available via MSRC; no public exploit code or CISA KEV listing has been identified at time of analysis.
Stack-based buffer overflow in Microsoft's Remote Desktop Client (mstsc.exe) enables remote code execution on unpatched Windows 10 1607 and Windows Server 2012/2016 systems. The CVSS vector (AV:N/AC:L/PR:N/UI:R) confirms the attack is network-delivered and requires no attacker privileges, but demands that a victim actively connect to an attacker-controlled RDP server - a meaningful but achievable social-engineering hurdle. Microsoft has released patches for all affected version branches; no public exploit identified at time of analysis.
Remote code execution in Microsoft Exchange Server stems from a heap-based buffer overflow (CWE-122) exploitable by any network-accessible authenticated user with low privileges. Affected versions span Exchange Server 2016 CU23, 2019 CU14 and CU15, and the Subscription Edition - all major currently-supported release lines. Vendor patches are available, and no public exploit identified at time of analysis, though the low attack complexity and full CIA impact make this a critical patching priority for enterprise Exchange deployments.
SSRF in Microsoft Exchange Server enables authenticated, low-privilege network attackers to escalate privileges, with Microsoft reporting high confidentiality, integrity, and availability impact across Exchange 2016, 2019, and Subscription Edition. Vendor-released patches are available covering all affected cumulative update branches. No public exploit code exists and no active exploitation has been confirmed - EPSS sits at 0.62% (46th percentile) and CISA SSVC assigns Exploitation: none - meaning the CVSS 8.8 score outpaces current real-world threat activity.
Remote code execution in Windows LDAP (Lightweight Directory Access Protocol) affects a broad swath of Microsoft Windows desktop and server editions, from Windows 10 through Windows 11 and Windows Server 2012 through 2025. A use-after-free memory corruption flaw (CWE-416) in the LDAP client implementation allows a network-accessible, unauthenticated attacker to achieve arbitrary code execution with high confidentiality, integrity, and availability impact, contingent on user interaction - most likely the victim system initiating or being induced to make an LDAP connection to an attacker-controlled server. No public exploit identified at time of analysis and no CISA KEV listing, but the CVSS score of 8.8 and the breadth of affected Windows versions make this a high-priority patching target.
Privilege escalation via SSRF in Microsoft Office SharePoint exposes authenticated users to full system compromise - confidentiality, integrity, and availability all rated High. The CVSS vector (PR:L/AV:N/AC:L/UI:N) confirms that any authenticated SharePoint user can trigger the vulnerability over the network without additional complexity. No active exploitation or public exploit code has been identified at time of analysis, though the low attack complexity and broad privilege impact make this a credible near-term risk.
Server-side request forgery in Microsoft Office SharePoint enables low-privileged authenticated attackers to escalate privileges with no user interaction required, achieving high confidentiality, integrity, and availability impact. The flaw (CWE-918) allows a legitimate but low-privilege account holder to forge server-side HTTP requests, likely reaching internal administrative interfaces or credential endpoints inaccessible from the network perimeter. No public exploit code and no CISA KEV listing have been identified at time of analysis.
Privilege escalation in Microsoft Azure CycleCloud (versions prior to 8.9.1) allows an authenticated low-privilege network attacker to elevate to higher privilege levels due to missing authorization checks (CWE-862). The CVSS 8.8 score reflects high impact across confidentiality, integrity, and availability with no user interaction required, though exploitation demands valid credentials. No public exploit has been identified at time of analysis, and this vulnerability has not been added to the CISA KEV catalog, though SSVC rates the technical impact as total.
Remote code execution in Windows DNS exposes a wide range of Windows Server and desktop systems to unauthenticated exploitation from adjacent network positions. Rooted in a CWE-787 out-of-bounds write triggered during DNS processing, the flaw carries a CVSS 8.8 score reflecting full confidentiality, integrity, and availability impact with no credentials or user interaction required. No public exploit identified at time of analysis, but a vendor-released patch is available and the broad affected version list - spanning Windows 10/11 and Server 2019 through 2025 - makes prioritized patching urgent for any environment where the DNS service is internet-edge or internally exposed.
Unauthenticated code execution in Windows DHCP Server allows an attacker positioned on an adjacent network segment to trigger a heap-based buffer overflow and achieve full system compromise. The vulnerability spans a wide range of Microsoft server and desktop platforms, from Windows Server 2012 through Windows Server 2025 and select Windows 10 builds, making it broadly relevant in Windows-centric enterprise environments. No public exploit code or CISA KEV listing has been identified at time of analysis, but the low-complexity, zero-interaction exploitation profile and vendor-confirmed patch availability make this a high-priority patching candidate for any organization running Windows DHCP Server.
Remote code execution in Microsoft Power BI enables low-privileged authenticated attackers to execute arbitrary code over the network via improper input validation (CWE-20). The CVSS 3.1 score of 8.8 (High) reflects full confidentiality, integrity, and availability impact with low attack complexity and no user interaction required beyond holding a valid account. No public exploit code or active exploitation has been identified at time of analysis, though the MSRC advisory at https://msrc.microsoft.com/update-guide/vulnerability/CVE-2026-65811 should be consulted for patch and scope details.
OS command injection in GitHub Copilot and Visual Studio Code enables a local unauthorized attacker to escalate privileges on the affected developer workstation, achieving full High impact across confidentiality, integrity, and availability. The CWE-78 root cause indicates that attacker-influenced input containing shell metacharacters is improperly incorporated into OS-level command execution within one or both products, triggering upon a user action such as opening a malicious file or repository. No public exploit code has been identified and this vulnerability has not been confirmed actively exploited by CISA KEV at time of analysis; however, the local privilege escalation path on widely deployed developer tooling represents a meaningful risk in supply chain and social engineering scenarios.
Local security feature bypass in Visual Studio Code allows an attacker with local access to circumvent an authorization control, achieving high-impact compromise of confidentiality, integrity, and availability on the affected system. The vulnerability (CWE-693, Protection Mechanism Failure) is exploitable locally without elevated privileges but requires user interaction, making social engineering or physical access the likely delivery path. No public exploit code or active exploitation has been identified at time of analysis.
Security feature bypass in Visual Studio Code (versions 1.0.0 through 1.132.1) exploits CWE-639, where authorization decisions rely on attacker-controllable keys, allowing a local attacker to circumvent an intended access control with high impact across confidentiality, integrity, and availability. The attack requires no elevated attacker privileges but does require a legitimate VS Code user to interact with the manipulated environment, pointing to shared-workstation or social-engineering delivery paths. No public exploit code has been identified and this CVE is absent from the CISA KEV catalog at time of analysis; a vendor-released patch is available at version 1.132.1.
Security feature bypass in the Python extension for Visual Studio Code (versions prior to 1.132.1) allows a local attacker to load functionality from an untrusted control sphere, achieving full compromise of confidentiality, integrity, and availability. The attack requires user interaction - specifically opening a malicious workspace or project directory - making it highly relevant in developer supply-chain and social engineering scenarios such as cloning a weaponized repository. No public exploit code or CISA KEV listing has been identified at the time of analysis, but the full CIA impact and low attack complexity elevate real-world concern for development environments.
Type confusion in Microsoft Office Excel's file-processing engine enables remote code execution when a user opens a specially crafted spreadsheet document. The vulnerability carries a CVSS 8.8 High score with full confidentiality, integrity, and availability impact against the Excel process, requiring only user interaction to trigger - the classic phishing-attachment threat model. No public exploit code has been identified and the vulnerability is not listed in the CISA KEV catalog at time of analysis.
Privilege escalation in Adobe ColdFusion 2023 and 2025 allows a low-privileged authenticated attacker to gain unauthorized read and write access beyond their authorized security scope by exploiting improper input validation in file processing. The attack requires social engineering - a victim with higher privileges must open a specially crafted malicious file - after which the attacker's effective permissions cross security boundaries (scope change, S:C) to reach resources outside the original ColdFusion component. No public exploit or CISA KEV listing has been identified at time of analysis, though the high CVSS score of 8.7 and scope-change impact warrant prompt remediation per Adobe advisory APSB26-90.
Code injection (CWE-94) in Microsoft PowerShell enables a local, unauthenticated attacker to bypass a security feature through user interaction, resulting in high-impact compromise of confidentiality, integrity, and availability. The CVSS 3.1 score of 7.8 reflects a local attack vector requiring user interaction, with no privileges needed from the attacker. No public exploit code or CISA KEV listing has been identified at time of analysis, but the RCE tag and full C/I/A impact make this a priority for environments running PowerShell on Windows.