Skip to main content

Db2 Mirror EUVDEUVD-2026-97815

| CVE-2026-96012 CRITICAL
Permissions, Privileges, and Access Controls (CWE-264)
2026-10-12 ibm GHSA-9f5h-jgcx-jpqf
9.9
CVSS 3.1 · Vendor: ibm
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Authenticate with low-privilege account
  2. Exploit
    Craft malicious request bypassing auth/validation checks
  3. Execution
    Execute injected code via Db2 Mirror
  4. Impact
    Escalate to elevated system privileges

Vulnerability Assessment

Weakness
CWE
ASVS 5.0
V8 - Authorization Permission and access control
MITRE ATT&CK

1 technique across 1 tactic: Privilege Escalation

The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up.

Exploitation Conditions

Exploitation requires the attacker to already possess a valid authenticated account on an IBM i system where Db2 Mirror for i (version 7.4, 7.5, or 7.6) is installed and running - per the CVSS PR:L, low-level privileges suffice and no user interaction is needed. The core condition is the ability to submit a crafted request to the Db2 Mirror service that evades its additional authorization and input-validation checks; the description does not specify a non-default configuration toggle, so standard deployments of the affected versions appear exposed. The principal limiting factor is the authentication requirement: this is not remotely exploitable by fully unauthenticated attackers, which narrows the realistic threat to insiders, compromised accounts, or environments where low-privilege credentials are easily obtained.

Impact

This is a genuine high-priority vulnerability, though not a drop-everything emergency absent evidence of active exploitation. The CVSS 3.1 vector (AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H, 9.9) describes a network-reachable, low-complexity flaw requiring only low-level authenticated privileges and no user interaction, with a scope change that yields full confidentiality, integrity, and availability impact - the scope change plus privilege-escalation outcome is what pushes the score to 9.9. The vendor (IBM) reports a patch is available, but no EPSS score, SSVC decision data, KEV listing, or public POC is present in the input. There is no public exploit identified at time of analysis and no CISA KEV entry, so despite the near-maximum CVSS this currently reflects theoretical rather than demonstrated real-world exploitation. The signals are internally consistent (no conflict between CVSS network vector and the description's 'authenticated attacker' crafting a remote request). The main gap is the absence of exploitation-probability data (no EPSS) and SSVC automatability/technical-impact inputs, so prioritization should lean on the high intrinsic severity plus the fact that any authenticated Db2 Mirror for i user becomes a candidate attacker.

Exploit ScenarioDerived

An attacker who already holds a low-privilege authenticated account on an IBM i system running Db2 Mirror crafts a malicious request that bypasses the product's additional authorization and input-validation checks, causing it to execute attacker-supplied code. Because of the scope change, the resulting code runs with elevated privileges beyond the attacker's original authorization, giving effective control of the system. No public exploit code is identified at time of analysis.

Act Now Prioritize within 24-48h. Why: CRITICAL severity.
Patch available 0.5% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 12, 2026

Authenticated attackers with low privileges can escalate to elevated privileges on IBM i systems running Db2 Mirror for i 7.4, 7.5, or 7.6 by submitting a crafted request that bypasses additional authorization and input-validation checks, potentially allowing malicious code execution. This critical-severity (CVSS 9.9) privilege escalation affects standard deployments and requires a valid low-privilege account; no public exploit code or active exploitation has been identified at time of analysis, but a vendor patch is available.

RemediationAI

IBM has released a patch available from the vendor support page at https://www.ibm.com/support/pages/node/7290193. Apply the patch according to IBM's instructions for Db2 Mirror for i 7.4, 7.5, and 7.6. In the absence of immediate patching, restrict network access to the Db2 Mirror service to trusted hosts and ensure that only authorized users have accounts on the IBM i system; however, these are compensating controls, not a substitute for the patch. Monitor for unusual requests to the Db2 Mirror service and review user privileges to minimize the attack surface. Since the vulnerability requires authenticated access, enforcing strong authentication and least privilege can reduce risk but does not eliminate it.

Affected VersionsENISA

Db2 Mirror for i 7.5
Db2 Mirror for i 7.4
Db2 Mirror for i 7.6

Affected Packages

euvd db2_mirror_for_i no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

IBM Db2 Mirror for i is a high-availability clustering solution for IBM i (formerly AS/400) that replicates data between nodes to ensure continuous availability. The vulnerability resides in the service handling incoming requests, where insufficient authorization controls (CWE-264: Permissions, Privileges, and Access Controls) allow an authenticated attacker with low privileges to bypass additional checks and execute malicious code, escalating privileges on the system. The CVSS vector (AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H) indicates network exploitable, low complexity, low privileges required, no user interaction, and a scope change that affects system-level confidentiality, integrity, and availability. Affected versions are 7.4, 7.5, and 7.6 per CPE.

Know when Db2 Mirror For I gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (ibm) PRIMARY 9.9 CRITICAL
AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H
vuln.today AI 9.9 CRITICAL

Network-reachable service with low complexity; PR:L because a valid low-privilege account is required; scope change and full C/I/A impact reflect code execution escalating to elevated system privileges.

3.1 AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H
4.0 AV:N/AC:L/AT:N/PR:L/UI:N/VC:H/VI:H/VA:H/SC:H/SI:H/SA:H

Primary rating from Vendor (ibm).

CVSS VectorVendor: ibm

Attack Vector
Network
Attack Complexity
Low
Privileges Required
Low
User Interaction
None
Scope
Changed
Confidentiality
High
Integrity
High
Availability
High

DescriptionCVE.org

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 is vulnerable to privilege escalation. An authenticated attacker could craft a malicious request that bypasses additional authorization and input validation checks to execute malicious code. An attacker could exploit this vulnerability to obtain elevated privileges on the system.

Executive ViewAI

Why It Matters

A critical privilege-escalation flaw in IBM Db2 Mirror for i (versions 7.4, 7.5, and 7.6) allows a holder of a valid low-privilege account to gain elevated privileges and potentially execute malicious code on the affected system. Because Db2 Mirror underpins high-availability database replication, a compromise could disrupt core transactional workloads and expose sensitive business data across standard IBM i deployments, making this a priority for security and platform leadership.

Business Impact: High
Compensating Controls

Apply vendor patch.

Threat Intelligence Overview

EPSS Score
0.5%
Top 58% exploitable
Prevalence
Low
niche IBM i (Power) high-availability replication add-on, industry-specific footprint
Data Quality
6 sources
Confidence: High

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity CRITICAL
CISA KEV No
Public POC No
EPSS 0.5%
Patch available Yes
Active threat No
Deciding rule
CRITICAL severity
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision
Scheduled
Exploitation
None
System Exposure· derived
Open
Automatable
No
Human Impact
High
Technical Impact
Total

Priority Score

51
Low Medium High Critical
KEV: 0
EPSS: +1
CVSS: +50
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

Privilege escalation occurs when an attacker leverages flaws in access control mechanisms to gain permissions beyond what they were originally granted.

CVE-2026-16956 CRITICAL
9.8 Aug 12

OS command injection in IBM Db2 Mirror for i (releases 7.4, 7.5, and 7.6) lets a remote, unauthenticated attacker execut

CVE-2026-17184 CRITICAL
9.8 Aug 14

Remote code execution in IBM Db2 Mirror for i (versions 7.4, 7.5, and 7.6) allows a remote unauthenticated attacker to r

CVE-2026-17182 CRITICAL
9.8 Aug 14

Authentication bypass in IBM Db2 Mirror for i (versions 7.4, 7.5, and 7.6) lets a remote, unauthenticated attacker read

CVE-2026-17186 CRITICAL
9.8 Aug 14

Remote CL command execution in IBM Db2 Mirror for i 7.4, 7.5, and 7.6 lets a remote attacker run arbitrary Control Langu

CVE-2026-16879 HIGH
8.8 Aug 14

Security restriction bypass in IBM Db2 Mirror for i 7.4, 7.5, and 7.6 permits remote authenticated attackers to exceed t

CVE-2026-17181 HIGH
8.6 Aug 14

Arbitrary file write via path traversal in IBM Db2 Mirror for i 7.4, 7.5, and 7.6 enables remote unauthenticated attacke

CVE-2026-18178 HIGH
8.1 Aug 14

Arbitrary file deletion in IBM Db2 Mirror for i versions 7.4, 7.5, and 7.6 is achievable by remote authenticated attacke

CVE-2026-18554 HIGH
7.5 Aug 14

Sensitive file disclosure in IBM Db2 Mirror for i versions 7.4, 7.5, and 7.6 is possible through a path traversal flaw (

CVE-2026-16915 HIGH
7.5 Aug 14

Path traversal in IBM Db2 Mirror for i versions 7.4, 7.5, and 7.6 enables remote authenticated attackers to read sensiti

CVE-2026-17081 HIGH
7.5 Aug 14

Arbitrary file write via path traversal in IBM Db2 Mirror for i versions 7.4, 7.5, and 7.6 exposes systems to unauthenti

CVE-2026-17177 HIGH
7.5 Aug 14

Uncontrolled recursion in IBM Db2 Mirror for i versions 7.4, 7.5, and 7.6 enables remote unauthenticated attackers to cr

CVE-2026-16708 HIGH
7.5 Aug 14

IBM Db2 Mirror for i versions 7.4, 7.5, and 7.6 exposes a network-accessible pathway through which an unauthenticated re

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy