Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessReach gateway network endpoint
-
DeliverySend crafted input to sort path
-
ExploitTrigger strict-weak-ordering comparator violation
-
ExecutionCause out-of-bounds memory access
-
ImpactCrash service and deny availability
Vulnerability Assessment
| Weakness |
CWE
ASVS 5.0
V15 - Secure Coding and Architecture Bounds checking, write limits
MITRE ATT&CK
2 techniques across 2 tactics: Execution, Privilege Escalation The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | No special configuration conditions are stated: the flaw is a remote, unauthenticated availability issue (AV:N/AC:L/PR:N/UI:N) reachable against affected DataPower Gateway builds in default operation, triggered when attacker-influenced input reaches the vulnerable sorting comparator that violates strict-weak-ordering and causes an out-of-bounds access. Exploitation is limited to running an affected version - DataPower Gateway 10.5.0.0 through 10.5.0.22, 10.6.0.0 through 10.6.0.10, 10.6.1 through 10.6.6, or 11.0.0.0 through 11.0.0.2 - and the impact is confined to denial of service; there is no confidentiality or integrity effect and no privilege gain, so defenders should weigh this primarily as an uptime/availability risk for exposed gateways. |
| Impact | This is a genuine but bounded operational risk. The CVSS 3.1 vector (AV:N/AC:L/PR:N/UI:N) confirms a network-reachable, low-complexity, unauthenticated flaw, and the A:H / C:N / I:N profile makes it a pure availability (denial-of-service) issue - there is no data disclosure or code-execution impact claimed, so the base score of 7.5 is driven entirely by uptime risk. Although CWE-787 (out-of-bounds write) and the 'Buffer Overflow'/'Memory Corruption' tags might suggest memory-corruption-to-RCE potential, both the description and the CVSS impact metrics scope this strictly to a crash/DoS from an out-of-bounds memory access triggered by a strict-weak-ordering violation in a sorting comparator; do not treat it as RCE without further vendor confirmation. No EPSS score, SSVC decision data, KEV listing, or POC was provided in the input, so exploitation likelihood cannot be quantified - the absence of these signals is not evidence of safety but does mean there is no current indication of active or automatable exploitation. Net: prioritize patching for internet-facing or high-availability DataPower deployments because of the unauthenticated network DoS, but this is not a confidentiality/integrity breach and shows no confirmed exploitation to date. |
| Exploit ScenarioDerived | A remote, unauthenticated attacker sends specially crafted input that drives the vulnerable sorting routine, whose comparator violates strict-weak-ordering and causes an out-of-bounds memory access. The resulting crash of the DataPower Gateway process interrupts API, message-routing, and security-gateway services for all downstream consumers. No public exploit code was identified in the provided data, but the low attack complexity (AC:L) means a reliable trigger would be straightforward once the input path is understood. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 08, 2026
IBM DataPower Gateway can be driven into a denial-of-service condition by a remote, unauthenticated attacker who supplies input that reaches a flawed sorting comparator, causing the comparator to violate strict-weak-ordering and triggering an out-of-bounds memory access (CWE-787) that can crash or destabilize the affected service. All builds in the 10.5.0.0-10.5.0.22, 10.6.0.0-10.6.0.10, 10.6.1-10.6.6, and 11.0.0.0-11.0.0.2 ranges are affected; the impact is confined to availability (CVSS 3.1 base 7.5, AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H) with no confidentiality or integrity effect and no privilege gain. At time of analysis there is no confirmed active exploitation (not in CISA KEV) and no public exploit code identified, and IBM has published a fix via its support advisory, so this should be treated as a patching-priority availability risk rather than an emergency.
RemediationAI
Patch available per vendor advisory (IBM support page node/7289775, https://www.ibm.com/support/pages/node/7289775). IBM's advisory is the authoritative source and should be consulted for the exact fixed fix-pack levels above 10.5.0.22, 10.6.0.10, 10.6.6, and 11.0.0.2; the provided data does not enumerate a specific patched build number, so confirm the target release against that page before upgrading, and prefer the latest available fix pack in the relevant branch since the flaw is shared across the 10.5.0, 10.6.0, 10.6.x CD, and 11.0.0 code lines. Until maintenance windows allow the upgrade, treat this as an availability-only issue: reduce the exposed attack surface by restricting network reachability to DataPower's data-processing and administrative listeners to trusted source ranges or a fronting proxy/WAF rather than leaving them internet-facing, with the trade-off that legitimate API clients outside those ranges will need to be added to allowlists or will fail to connect. Rate-limiting or throttling inbound requests and applying request-shape/size limits reduces the chance an attacker can drive the vulnerable comparator repeatedly, at the cost of capping throughput for high-volume tenants. Because there is no public exploit code identified, signature-based WAF rules are unlikely to be reliable, so rely on access control, monitoring for abrupt gateway process restarts or unexplained service outages as an exploitation indicator, and redundant/load-balanced gateways to absorb a single-node availability loss. There is no documented configuration toggle that disables the vulnerable sorting path, so no feature-level workaround is available in the provided data.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 4 packages in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The defect sits in an internal sorting routine: the comparator used to order attacker-influenced data breaks the strict-weak-ordering contract that C++ (and equivalent) sort implementations assume - meaning it is not irreflexive and/or transitive for some input orderings. When a comparator violates that contract, standard sort algorithms can read or write outside the bounds of the underlying container, which is the classic path to the out-of-bounds memory access classified here under CWE-787 (out-of-bounds write). The outcome observed by IBM is memory corruption leading to a denial of service rather than code execution, which matches the assessed vector's availability-only impact. The advisory tags (Buffer Overflow, Memory Corruption, Denial Of Service) are consistent with that root cause: memory safety is broken by a logic error in ordering logic, not by a length or bounds check. The affected CPEs map to four product lines: Datapower Gateway 10.5.0, 10.6.0, 11.0.0, and the 10.6 Continuous Delivery line recorded as datapower_gateway_10.6cd, indicating the flaw is shared across the version branches that carry the same sorting component rather than being isolated to a single release. No exploitation prerequisites beyond running a vulnerable build are documented; the attacker does not need credentials (PR:N) or user interaction (UI:N), and the attack is network-reachable (AV:N) with low complexity (AC:L).
Know when Datapower Gateway 10 6Cd gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
Remote unauthenticated reachable (AV:N/PR:N/UI:N), low complexity to trigger the crash (AC:L), and impact limited to a denial of service, so A:H with C:N/I:N.
Primary rating from Vendor (ibm).
CVSS VectorVendor: ibm
DescriptionCVE.org
IBM DataPower Gateway 10.5.0.0 through 10.5.0.22, 10.6.1 through 10.6.6, 10.6.0.0 through 10.6.0.10, and 11.0.0.0 through 11.0.0.2 could allow a remote attacker to cause a denial of service due to out-of-bounds memory access caused by a strict-weak-ordering violation in a sorting comparator.
Executive ViewAI
IBM DataPower Gateway, a critical integration and API gateway platform, is affected by a high-severity denial-of-service vulnerability that can be triggered remotely without authentication, potentially crashing or destabilizing the service. Organizations using affected builds (10.5.0.0-10.5.0.22, 10.6.0.0-10.6.0.10, 10.6.1-10.6.6, and 11.0.0.0-11.0.0.2) face availability disruptions that could impact API traffic, B2B integrations, and secure gateway operations. No public exploit identified at time of analysis, but leadership should prioritize patching to avoid service outages.
Apply vendor patch.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
A buffer overflow occurs when a program writes more data to a memory buffer than it was allocated to hold, causing the excess data to spill into adjacent memory regions.
Memory corruption occurs when a program writes data beyond the boundaries of allocated memory regions or accesses memory in unintended ways, violating the integrity of the process's address space.
Denial of Service attacks render applications or systems unavailable by overwhelming resources or triggering failure conditions.
More in Datapower Gateway 10 6Cd
View allUnauthenticated remote code execution affects IBM DataPower Gateway across multiple release streams - 10.5.0.0 through 1
Unauthenticated remote code execution in IBM DataPower Gateway affects the 10.5.0.0 through 10.5.0.22, 10.6.0.0 through
Arbitrary code execution in IBM DataPower Gateway is possible when a user with existing local access to the appliance su
Empty-password LDAP authentication bypass in IBM DataPower Gateway lets remote, unauthenticated attackers obtain adminis
Remote code execution in IBM DataPower Gateway (10.5.0.0-10.5.0.22, 10.6.0.0-10.6.0.10, 10.6.1-10.6.6, and 11.0.0.0-11.0
A remotely reachable, unauthenticated out-of-bounds write (buffer overflow, CWE-787) in IBM DataPower Gateway can corrup
IBM DataPower Gateway versions 10.5.0.0-10.5.0.20, 10.6.0.0-10.6.0.8, and 10.6.1.0-10.6.5.0 are vulnerable to cross-site
Out-of-bounds write in IBM DataPower Gateway lets unauthenticated remote attackers corrupt process memory, resulting in
An out-of-bounds write in IBM DataPower Gateway (10.5.0.0 through 10.5.0.22, 10.6.0.0 through 10.6.0.10, 10.6.1 through
XML external entity injection in IBM DataPower Gateway 10.5.0.0-10.5.0.22, 10.6.0.0-10.6.0.10, 10.6.1-10.6.6, and 11.0.0
Heap-based buffer overflow (CWE-787) in IBM DataPower Gateway allows an unauthenticated remote attacker to crash the gat
Unauthenticated remote attackers can trigger a memory-safety fault in IBM DataPower Gateway that crashes the affected se
EUVD-2026-94972
GHSA-qcmh-rwpx-c373
NVD
CVE.org
EPSS
Vulnrichment
Exploit-DB