Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessObtain low-privilege management credentials
-
DeliveryAccess web interface at /goform/formWanTcpipSetup
-
ExploitSubmit oversized pppUserName POST parameter
-
ExecutionOverflow fixed stack buffer in formWanTcpipSetup
-
PersistOverwrite return address
-
ImpactExecute arbitrary code on device firmware
Vulnerability Assessment
| Weakness |
CWE
ASVS 5.0
V15 - Secure Coding and Architecture Stack buffer bounds checking
MITRE ATT&CK
1 technique across 1 tactic: Execution The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Exploitation requires network access to the Edimax EW-7478APC web management interface and a valid low-privilege authenticated session (PR:L per the CVSS 4.0 vector). The specific vulnerable entry point is the WAN TCP/IP configuration form at |
| Impact | The CVSS 4.0 score of 8.6 (High) reflects a network-accessible, low-complexity vulnerability requiring low privileges with high impact across both vulnerable and subsequent systems (VC:H/VI:H/VA:H/SC:H/SI:H/SA:H). The E:P modifier confirms a public exploit exists, which materially elevates real-world risk. No EPSS data was provided in the input. The PR:L requirement - meaning some authenticated session is needed - is the primary limiting factor preventing fully opportunistic mass exploitation, though SOHO devices with default or weak credentials frequently have this barrier trivialized. KEV status has not been confirmed, so active exploitation cannot be asserted; however, the public POC lowers the attacker skill requirement significantly. The vendor's non-response to disclosure means no patch is forthcoming on any known timeline, leaving defenders with only compensating controls. The CVSS 4.0 subsequent-system impact scores (SC:H/SI:H/SA:H) accurately reflect that a fully compromised router/AP threatens all downstream network traffic, enabling interception and manipulation of connected clients. The combination of public exploit, no patch, and a vendor who is unresponsive makes this a real priority for any organization with this device deployed. |
| Exploit ScenarioDerived | An attacker with low-privilege credentials to the EW-7478APC management interface sends a crafted HTTP POST request to |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv2 – Aug 16, 2026
Stack-based buffer overflow in Edimax EW-7478APC wireless access point firmware 1.04 enables remote code execution against the device by submitting an oversized PPPoE username to the WAN configuration endpoint. Low-privilege authenticated attackers with network access to the management interface can exploit the pppUserName parameter in /goform/formWanTcpipSetup to overwrite stack memory and gain arbitrary code execution on the device. A public proof-of-concept exploit exists; the vendor did not respond to responsible disclosure, leaving the device with no available patch.
Earlier versions of this analysis (1)
Stack-based buffer overflow in the Edimax EW-7478APC 1.04 access point lets a remote, low-privileged attacker overrun a fixed-size stack buffer by supplying an oversized pppUserName value to the formWanTcpipSetup handler at /goform/formWanTcpipSetup, enabling likely arbitrary code execution or device crash. The flaw affects the WAN TCP/IP setup routine of this business-class wireless AP; publicly available exploit code exists, though it is not listed in CISA KEV. The CVSS 4.0 score is 9.4, and the vendor was contacted but did not respond, so no fix is available.
RemediationAI
No vendor-released patch is available - the vendor was contacted but did not respond to responsible disclosure, and no fix version exists at time of analysis. The primary mitigation is to immediately restrict access to the device's web management interface: disable WAN-side (internet-facing) remote management if enabled, and limit LAN-side management access to trusted administrator hosts using firewall ACLs or VLAN segmentation. If the device is internet-exposed, place it behind an upstream firewall or NAT device that blocks external access to management ports (typically TCP 80/443). Disabling PPPoE WAN configuration through the web interface (if the ISP connection type permits an alternative) would eliminate the specific vulnerable endpoint, but may not be feasible for ISPs requiring PPPoE authentication. Given the absence of a vendor patch, organizations with this device in production should evaluate replacement with a supported device as the only definitive remediation. References: VulDB entry at https://vuldb.com/vuln/391136; public exploit documentation at https://lavender-bicycle-a5a.notion.site/EDIMAX-EW-7478APC-formWanTcpipSetup-34b53a41781f8047b36bd11dbcaa84dc.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The affected product is the Edimax EW-7478APC wireless access point, confirmed at firmware version 1.04 per EUVD-2026-59997 (CPE: cpe:2.3:a:edimax:ew-7478apc:*:*:*:*:*:*:*:*). The vulnerability is rooted in CWE-121 (Stack-Based Buffer Overflow): the formWanTcpipSetup function in the device's HTTP-based configuration backend copies the pppUserName POST parameter into a fixed-size stack buffer without validating the input length. PPPoE (Point-to-Point Protocol over Ethernet) credentials are handled through this endpoint for WAN interface configuration, which is a standard feature of SOHO router/AP firmware. The unchecked copy allows an attacker to overflow the stack frame, potentially overwriting the return address and enabling control-flow hijacking to execute arbitrary code within the device's firmware execution context.
Know when Ew 7478Apc gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
CVSS:4.0/AV:N/AC:L/AT:N/PR:L/UI:N/VC:H/VI:H/VA:H/SC:H/SI:H/SA:H/E:P
AV:N and AC:L per web-facing endpoint; PR:L per CVSS 4.0 input; S:C because router compromise enables downstream network interception of connected clients.
Primary rating from Vendor (VulDB).
CVSS VectorVendor: VulDB
Lifecycle Timeline
4DescriptionCVE.org
A weakness has been identified in Edimax EW-7478APC 1.04. This affects the function formWanTcpipSetup of the file /goform/formWanTcpipSetup. This manipulation of the argument pppUserName causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
Executive ViewAI
Edimax EW-7478APC wireless access points (firmware 1.04) are vulnerable to remote code execution through network-accessible management interfaces, with publicly available exploit code already circulating and no vendor patch forthcoming. Any organization deploying these devices exposes its network infrastructure to potential unauthorized access and administrative control by remote threat actors. Immediate identification and remediation of affected equipment is required.
Network segmentation to isolate affected devices from critical infrastructure; restrict management interface access via firewall rules to administrative networks only; disable WAN configuration and remote management features if operationally feasible; implement continuous network monitoring for suspicious access patterns to the management interface; execute expedited device replacement plan to eliminate the vulnerability entirely.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
A buffer overflow occurs when a program writes more data to a memory buffer than it was allocated to hold, causing the excess data to spill into adjacent memory regions.
A stack-based buffer overflow occurs when a program writes more data to a buffer located on the stack than it was allocated to hold.
More in Ew 7478Apc
View allRemote buffer overflow in the Edimax EW-7478APC wireless access point (firmware 1.04) lets an authenticated attacker cor
Buffer overflow in the Edimax EW-7478APC wireless access point (firmware 1.04) lets remote attackers corrupt memory by s
Buffer overflow in the Edimax EW-7478APC wireless access point (firmware 1.04) lets remote attackers overflow a buffer b
Command injection in Edimax EW-7478APC firmware 1.04 enables remote attackers with low-privilege access to execute arbit
Command injection in Edimax EW-7478APC firmware 1.04 allows authenticated remote attackers to execute arbitrary OS comma
OS command injection in the Edimax EW-7478APC wireless access point firmware 1.04 allows a network-reachable authenticat
EUVD-2026-59997
GHSA-xfm9-p773-w7h2
NVD
CVE.org
EPSS
Vulnrichment
VulDB
Exploit-DB