Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessGain adjacent-network position near device
-
ExploitSend crafted traffic to affected HPE device
-
ImpactExploit unauthenticated flaw to disclose data across trust boundary
Vulnerability Assessment
| Exploitation Conditions | Exploitation requires the attacker to occupy an adjacent network position (AV:A) relative to the affected HPE device - the same Layer 2 segment, broadcast domain, or directly-connected logical network - and is therefore not reachable from arbitrary internet hosts. No authentication (PR:N) and no user interaction (UI:N) are needed, and complexity is low (AC:L), so once adjacency is achieved exploitation is straightforward. Scope is changed (S:C), meaning impact extends beyond the vulnerable component to a separate security authority. The exact feature, protocol, or configuration that triggers the flaw is not described in the available sources (no description or CWE was provided), so no specific enabling setting can be named; the primary limiting factor is the adjacency requirement, which confines exploitation to attackers with local network reach. |
| Impact | The input CVSS 3.1 vector (AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:N, base 9.3) describes an unauthenticated, low-complexity flaw requiring no user interaction, with a changed scope and high confidentiality and integrity impact - severe on paper. The single most important tempering signal is AV:A (Adjacent): this is NOT internet-wide/remote exploitation; an attacker must already sit on the same adjacent network (shared L2 segment, broadcast domain, or directly-connected logical network) as the affected HPE device, so it is not wormable across the internet and exposure depends on network segmentation. Exploitation-likelihood signals are largely absent or conflicting: no EPSS score is provided, the CVE is not listed in CISA KEV, and no PoC or exploit reference is supplied - so there is no public exploit identified at time of analysis and no evidence of active exploitation. This conflicts with the vuln.today Decision label of 'act_now', which appears driven by the high base score plus the unauthenticated/adjacent profile and first-party vendor (HPE) reporting rather than by observed exploitation. Additionally, the only categorization signal, the 'Information Disclosure' tag, is in tension with the vector's I:H (integrity) claim - pure information disclosure would normally be confidentiality-centric; verify the true integrity impact with HPE. Net: treat as a real, high-priority patch item for environments where untrusted parties can reach the device at Layer 2 (shared/guest networks, campus LANs, multi-tenant segments), but recognize that active-exploitation evidence is currently missing and the exact mechanism is undocumented. |
| Exploit ScenarioDerived | An attacker positioned on the same adjacent network as a vulnerable HPE Networking device (e.g., a shared LAN or wireless segment) sends crafted traffic to it without any authentication or user interaction, exploiting the flaw to read high-confidentiality data and, per the vendor vector, affect integrity across a trust boundary (scope changed). The specific trigger is not described in the available sources, and no public exploit has been identified at time of analysis. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 22, 2026
An unauthenticated, low-complexity security flaw affects an as-yet-unnamed HPE product documented in HPE security bulletin hpesbnw05162, carrying a base CVSS 3.1 score of 9.3 (AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:N) and triaged as act_now. The only barrier to exploitation is network position: an attacker must sit on an adjacent Layer 2 segment, broadcast domain, or directly connected logical network, after which no credentials or user interaction are required and impact extends past the vulnerable component to a separate security authority with high confidentiality and integrity consequences. No public exploit code or proof-of-concept reference was identified at time of analysis, and the vulnerability is not listed as confirmed actively exploited (CISA KEV); the specific triggering feature, protocol, or configuration is not described in the available sources, and no CWE has been assigned.
RemediationAI
No vendor-released patch and no fixed version are identified in the provided data; the HPE advisory at https://support.hpe.com/hpesc/public/docDisplay?docId=hpesbnw05162en_us&docLocale=en_US is the authoritative source for fixed firmware or software versions and should be consulted before any other action, and HPE support should be engaged directly if the bulletin does not yet list an update. Because the assessed exploitation condition is adjacency (AV:A), the concrete compensating control is to remove untrusted hosts from the same Layer 2 segment as affected HPE equipment: enforce segmentation with routed boundaries rather than flat VLANs or bridged links, apply private-VLAN or port-isolation on access ports, and gate switch ports with 802.1X or MAC-based port security. The trade-off is operational - segmentation and port authentication add configuration overhead and can break discovery protocols, guest access, and management-plane tooling that assume a flat broadcast domain - while ACLs and infrastructure ACLs at the Layer 3 boundary reduce but do not eliminate exposure for hosts that remain on the same segment. Given the changed scope (S:C), assume that any host sharing a segment with an affected device is a viable launch point, and prioritise isolation of those segments until a fixed version is confirmed in the advisory.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The affected technology stack cannot be pinned down from the supplied data: no CPE, no CWE, and no description were provided, only an HPE support-document reference (hpesbnw05162en_us) filed by HPE's own security-alert address, with the tag 'Information Disclosure'. The CVSS 3.1 vector is the most informative artefact. AV:A confines the attack path to an adjacent network - same Layer 2 segment, same broadcast domain, or a directly attached logical network - so it is not reachable from arbitrary internet hosts. AC:L and PR:N with UI:N mean that once adjacency is established, no credential, no race condition, and no victim action are needed; the assessment provided does not describe the underlying mechanism, and the trigger class cannot be inferred from the metrics alone (AC:L is a severity metric, not a statement about races, heap grooming, or timing). S:C indicates the impact crosses a trust boundary into a separate security authority, and C:H/I:H with A:N means attacker-controlled reads and writes of sensitive data rather than a denial-of-service outcome. The 'Information Disclosure' tag highlights the confidentiality dimension, but the vector also asserts high integrity impact, so the flaw should be treated as more than read-only leakage. Because the root-cause class, protocol, and affected subsystem are unstated, defenders must consult the HPE bulletin for the exact component, the vulnerable feature, and any configuration preconditions.
Know when Hpe gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:N
Adjacent, unauthenticated, no-UI access per vendor metrics gives AV:A/AC:L/PR:N/UI:N/S:C; C:H is supported by the Information Disclosure tag, while I:H is vendor-asserted and unverified from available text.
Primary rating from Vendor (hpe).
CVSS VectorVendor: hpe
DescriptionCVE.org
No description provided
Executive ViewAI
A critical vulnerability (CVE-2026-79874) in an HPE product exposes adjacent network segments to unauthenticated attacks that can compromise confidentiality and integrity across security boundaries. Leadership should prioritize mitigation because a single compromised Layer 2 segment could enable lateral movement and data breaches, affecting multiple business units. With no patch available, immediate network segmentation and monitoring are essential to reduce organizational risk.
No vendor-released patch identified at time of analysis. Interim mitigations: isolate affected HPE devices on dedicated VLANs, enforce strict Layer 2 segmentation and ACLs, deploy network monitoring for anomalous traffic, and limit adjacent network access to only necessary systems.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.
An unprivileged network attacker could gain system privileges to provisioned Intel manageability SKUs: Intel Active Mana
The read_mru_list function in NTP before 4.2.8p9 allows remote attackers to cause a denial of service (crash) via a craf
Default, hard-coded credentials shipped on several administrative and system accounts in HPE's Analytics and Location En
A directory traversal vulnerability in Hewlett Packard Enterprise Insight Remote Support may allow remote code execution
A potential security vulnerability has been identified in Hewlett Packard Enterprise OfficeConnect 1820, 1850, and 1920S
A security vulnerability in HPE Smart Update Manager (SUM) prior to version 8.5.6 could allow remote unauthorized access
A vulnerability in HPE Insight Remote Support (IRS) prior to v7.15.0.646 may allow an unauthenticated denial of service
NTP through 4.2.8p12 has a NULL Pointer Dereference. Rated high severity (CVSS 7.5), this vulnerability is remotely expl
A maximum-severity, network-reachable flaw (CVSS 3.1 base 10.0) in an as-yet-unnamed HPE product allows remote attackers
Unauthenticated network attackers can potentially achieve high confidentiality, integrity, and availability impact again
HPE security bulletin hpesbnw05162en_us documents a maximum-severity (CVSS 10.0) exposure in an HPE product that is not
HPE advisory hpesbnw05162en_us covers a product flaw carrying a CVSS 3.1 base score of 10.0 (AV:N/AC:L/PR:N/UI:N/S:C/C:H
EUVD-2026-108374
GHSA-xm8p-hm8m-mf6g
NVD
CVE.org
EPSS
VulDB
Exploit-DB