Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessGain adjacent-network foothold
-
ExploitSend crafted traffic to device
-
ExecutionTrigger flaw (mechanism not described)
-
ImpactDisclose data and tamper across boundary
Vulnerability Assessment
| Exploitation Conditions | Per the CVSS vector, exploitation requires the attacker to be on the same adjacent network as the affected HPE networking device (AV:A) - not routable from the open internet - but needs no authentication (PR:N) and no user interaction (UI:N), with low attack complexity (AC:L). The adjacency requirement is the primary limiting factor: the attacker must already have access to the relevant LAN/VLAN, wireless, or device-management segment. No description was provided, so any further configuration, feature, or deployment-mode prerequisites cannot be stated and must be confirmed against HPE advisory hpesbnw05162en_us. |
| Impact | The provided CVSS 3.1 vector (AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:N, base 9.3) describes an adjacent-network, low-complexity, unauthenticated flaw requiring no user interaction, with a scope change and high confidentiality and integrity impact but no availability impact - a severe profile for a networking device. The vuln.today decision label is 'act_now', which signals high prioritization. However, the key exploitation-probability signals are MISSING: no EPSS score, no CISA KEV listing, and no POC/exploit reference were provided, so there is no public evidence of active or likely-imminent exploitation to corroborate the 'act_now' label. The 'act_now' priority therefore appears driven by the high CVSS severity and vendor (HPE) advisory rather than by confirmed exploitation telemetry - treat it as a high-severity, high-priority patch item, not as a confirmed in-the-wild threat. Note also a signal conflict: the only tag is 'Information Disclosure', yet the CVSS vector asserts I:H (high integrity impact), so the issue is broader than disclosure alone - verify the full impact with the HPE advisory. No CVE description or CWE was supplied, so the exact vulnerability mechanism cannot be confirmed from the available data. |
| Exploit ScenarioDerived | An attacker positioned on the same adjacent network segment as the affected HPE networking product (e.g., the same LAN, VLAN, or wireless/management network) sends crafted traffic to the device and, without authentication or user interaction, gains access to sensitive information and the ability to tamper with data, with effects crossing a security boundary (scope change). No public exploit or POC was identified in the provided data, so this scenario is inferred from the CVSS vector rather than demonstrated code. The precise trigger is not described in the available sources. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 22, 2026
Unauthenticated attackers positioned on the same adjacent network segment can both read and modify data on affected HPE networking devices, according to CVE-2026-79873 (CVSS 3.1 base 9.3, AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:N). The flaw requires no credentials and no user interaction and changes scope, meaning the attacker's control can extend beyond the vulnerable component, but the attack path is confined to the local LAN, VLAN, wireless, or management segment rather than being reachable from the open internet. No description has been published and no public exploit code has been identified at time of analysis; the vulnerability is not in CISA KEV, and the accompanying HPE advisory (hpesbnw05162en_us) is the authoritative source for affected models, trigger conditions, and fixes, which the reporting feed has tagged as involving information disclosure.
RemediationAI
No vendor-released fixed version is specified in the supplied data, so patch status should be treated as unconfirmed and the HPE Security Bulletin hpesbnw05162en_us (https://support.hpe.com/hpesc/public/docDisplay?docId=hpesbnw05162en_us&docLocale=en_US) consulted first to identify the affected firmware branches and any available update; apply the HPE-listed firmware release for every deployed branch. The vuln.today decision label is act_now, so treat this as a priority remediation rather than a routine update. Until an update is applied, the actionable compensating control follows directly from the assessed vector: the flaw is only reachable from an adjacent network, so constrain who can reach the affected device's interfaces - move management access onto a dedicated, tightly ACL-restricted segment, apply 802.1X or port security on access ports, and filter traffic between user VLANs, wireless clients, and device-management networks. The trade-off is operational: strict segmentation can break legitimate management, monitoring, and guest-access workflows, so changes should be validated against the topology before rollout, and OOB management paths must be preserved. Because the affected feature and trigger are not described in the sources, no feature-level workaround such as disabling a specific service can be recommended with confidence without first reading the HPE bulletin.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The record carries no CWE assignment and no vendor description, so the underlying implementation flaw, the affected feature, and the exact trigger are not described in the available sources. What the CVSS 3.1 vector does establish is the exploitation profile: AV:A places the attacker on an adjacent network, AC:L indicates no unusual preconditions beyond that access, PR:N and UI:N indicate no authentication or victim interaction, and S:C with C:H/I:H/A:N indicates a scope change with high confidentiality and integrity impact but no availability impact. The single reference is an HPE Security Bulletin, docId hpesbnw05162en_us, which is the only supplied source for the technology context; the feed carries an 'Information Disclosure' tag and was reported by security-alert@hpe.com, but the tag alone does not explain why integrity impact is also rated high. No CPE identifiers were supplied, so the exact product family, firmware branch, and deployment mode cannot be confirmed from this data set and must be read from the HPE bulletin.
Know when Hpe gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:N
No description was supplied, so metrics mirror the HPE-provided vector: adjacent unauthenticated access (AV:A/PR:N) with scope change and high confidentiality/integrity impact, no availability effect.
Primary rating from Vendor (hpe).
CVSS VectorVendor: hpe
DescriptionCVE.org
No description provided
Executive ViewAI
HPE networking devices are exposed to a critical unauthenticated vulnerability that allows attackers on the same network segment to read and modify sensitive data. This directly threatens the integrity and confidentiality of internal network traffic, potentially impacting business operations and data protection. Leadership should prioritize immediate containment because the flaw affects core infrastructure without requiring credentials.
No vendor-released patch identified at time of analysis. Interim mitigations include strict network segmentation to isolate affected devices, implementation of access control lists on adjacent network segments, and continuous monitoring for unauthorized access attempts.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.
An unprivileged network attacker could gain system privileges to provisioned Intel manageability SKUs: Intel Active Mana
The read_mru_list function in NTP before 4.2.8p9 allows remote attackers to cause a denial of service (crash) via a craf
Default, hard-coded credentials shipped on several administrative and system accounts in HPE's Analytics and Location En
A directory traversal vulnerability in Hewlett Packard Enterprise Insight Remote Support may allow remote code execution
A potential security vulnerability has been identified in Hewlett Packard Enterprise OfficeConnect 1820, 1850, and 1920S
A security vulnerability in HPE Smart Update Manager (SUM) prior to version 8.5.6 could allow remote unauthorized access
A vulnerability in HPE Insight Remote Support (IRS) prior to v7.15.0.646 may allow an unauthenticated denial of service
NTP through 4.2.8p12 has a NULL Pointer Dereference. Rated high severity (CVSS 7.5), this vulnerability is remotely expl
A maximum-severity, network-reachable flaw (CVSS 3.1 base 10.0) in an as-yet-unnamed HPE product allows remote attackers
Unauthenticated network attackers can potentially achieve high confidentiality, integrity, and availability impact again
HPE security bulletin hpesbnw05162en_us documents a maximum-severity (CVSS 10.0) exposure in an HPE product that is not
HPE advisory hpesbnw05162en_us covers a product flaw carrying a CVSS 3.1 base score of 10.0 (AV:N/AC:L/PR:N/UI:N/S:C/C:H
EUVD-2026-108373
GHSA-jcmx-h6hp-ff93
NVD
CVE.org
EPSS
VulDB
Exploit-DB