Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessIdentify exposed ACE service on unrestricted IP
-
ExploitConnect to endpoint over network
-
ExecutionQuery/observe exposed interface
-
ImpactHarvest sensitive information
Vulnerability Assessment
| Weakness |
CWE
ASVS 5.0
V15 - Secure Coding and Architecture Hardware binding mechanism
|
| Exploitation Conditions | Exploitation requires that an App Connect Enterprise service (version 13.0.1.0 through 13.0.8.2) be bound to an unrestricted/overly-broad network address (e.g., 0.0.0.0 or a public interface) instead of a loopback or restricted interface, and that the attacker have network reachability to that exposed listener. Per CVSS AV:N/AC:L/PR:N/UI:N, no authentication, no user interaction, and no special client-side conditions are needed once the service is reachable. The principal limiting factor is network exposure: deployments that place ACE behind firewalls, segmented networks, or bind only to restricted/loopback interfaces substantially reduce or eliminate reachability, so realistic risk hinges on whether the affected listener is reachable from an untrusted network. |
| Impact | The input assigns a 9.8 CRITICAL CVSS with vector AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H, which on its face describes a remote, unauthenticated, low-complexity flaw with full compromise of confidentiality, integrity, and availability. However, this directly conflicts with the description and the weakness type: the text states only that an attacker 'could obtain sensitive information,' and CWE-1327 (Binding to an Unrestricted IP Address) is an exposure/information-disclosure weakness, not a code-execution or tampering primitive. The I:H and A:H metrics therefore appear overstated - a bind-address misconfiguration realistically yields confidentiality impact (C:H) but should likely be I:N/A:N, implying a true base score nearer 7.5 rather than 9.8. On other signals: no EPSS score, no CISA KEV listing, and no public POC were provided, so there is no evidence of active exploitation or weaponization. No SSVC decision data was supplied. Net assessment: this is a genuine, easily-reachable network exposure worth prompt patching because it needs no authentication or user interaction, but the headline 9.8 overstates real-world severity - treat it as a high-priority information-disclosure issue, not a full-compromise RCE. VERIFY the I/A impact with IBM, as CVSS and description conflict. |
| Exploit ScenarioDerived | An IBM App Connect Enterprise instance (13.0.1.0-13.0.8.2) binds a service to an unrestricted address (e.g., 0.0.0.0) rather than a loopback or restricted interface, exposing it beyond its intended network boundary. A remote attacker with network reachability connects directly to the exposed endpoint and reads sensitive information without needing credentials or user interaction. No public exploit code was identified in the provided data; given AV:N/AC:L, exploitation requires only network access to the exposed port. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 20, 2026
IBM App Connect Enterprise 13.0.1.0 through 13.0.8.2 can expose sensitive information because components of the product may bind to an unrestricted IP address (for example 0.0.0.0 or a public interface) rather than a loopback or otherwise restricted address, leaving the listener reachable from untrusted networks. IBM's published score is 9.8 CRITICAL (AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H), but the assessed vector is information disclosure only (C:H/I:N/A:N): a remote, unauthenticated attacker with network reachability to the exposed listener could read data they should not have access to, without user interaction or special conditions. The practical risk is entirely governed by network exposure - deployments that firewall ACE, segment it, or bind listeners to restricted interfaces are largely shielded; no public exploit code and no CISA KEV entry were identified at time of analysis.
RemediationAI
No exact fixed version is confirmed in the provided data, so treat IBM's advisory at https://www.ibm.com/support/pages/node/7291781 as the authoritative source and upgrade to the first 13.0.8.x level (or later) that IBM lists as containing the fix, validating with IBM Support if no fixed level is published yet. Until then, the highest-value action is to eliminate the exposure path: reconfigure every affected listener to bind to 127.0.0.1 or a dedicated management interface (the trade-off is that remote clients and integrations must be repointed or fronted by a proxy/load balancer), or, if the wildcard bind cannot be changed, place the host behind host-firewall rules allowing only known integration partners to the specific listener ports and drop all other inbound traffic (this requires an accurate port inventory and will break undiscovered consumers). Additional compensating controls: segment ACE integration nodes into a restricted VLAN with no route from untrusted networks, disable or undeploy unused HTTP/SOAP connectors and administrative endpoints (reduces functionality but shrinks the exposed surface), and monitor listener logs and firewall telemetry for anomalous inbound connections to ACE ports. Because exploitation requires only reachability and no authentication, network controls rather than credential hardening are the effective stopgap; note that no public exploit code was identified, so broad opportunistic scanning rather than targeted attack is the near-term threat model.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The root cause is CWE-1327, Binding to an Unrestricted IP Address - a configuration/implementation weakness in which a service listener or connector inside IBM App Connect Enterprise (for example its integration server HTTP/SOAP or administrative listeners) is bound to a wildcard or externally routable address instead of 127.0.0.1 or a specific management interface. Binding to 0.0.0.0 causes the socket to accept connections on every interface on the host, so any network path to the host (including NAT, VPN, or a misconfigured cloud security group) reaches the service, and any access control that assumed the service was local-only is bypassed. Because the underlying protocol handling performs no additional authentication or authorization step for the information being disclosed, exploitation reduces to network reachability: per the assessed CVSS:3.1/AV:N/AC:L/PR:N/UI:N vector, no credentials, no user interaction, and no client-side precondition are required once the listener is exposed. The weakness is a classic exposure-amplifier: it does not grant new capabilities by itself but converts an otherwise host-local service into a remotely reachable one, which is why the assessed impact is limited to confidentiality (high) with no integrity or availability effect, in contrast to the vendor's 9.8 score that implies full compromise of all three.
Know when the next one hits your stack
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Remote, unauthenticated, low-complexity reach of an over-exposed listener (AV:N/AC:L/PR:N/UI:N); CWE-1327 info disclosure yields C:H but no integrity or availability impact, so I:N/A:N.
Primary rating from Vendor (us).
CVSS VectorVendor: us
DescriptionCVE.org
IBM App Connect Enterprise 13.0.1.0 through 13.0.8.2 could allow a remote attacker to obtain sensitive information due to binding to an unrestricted IP address.
Executive ViewAI
IBM App Connect Enterprise releases 13.0.1.0 through 13.0.8.2 can bind service listeners to unrestricted network interfaces, allowing any host that can reach the platform to read integration data without authenticating. Because ACE typically brokers business-critical transactions, credentials and partner data, leadership should treat this as a data-exposure risk concentrated in internet-facing or flat-network deployments, and prioritize inventorying and constraining exposure of those listeners.
No vendor-released patch identified at time of analysis. Interim mitigations: rebind affected listeners to loopback or otherwise restricted interfaces; block inbound access to ACE listener ports at network and host firewalls and allow only approved integration clients; segment ACE hosts into a restricted management/integration zone; monitor listener access logs for unexpected source addresses; restrict administrative and connector traffic to trusted networks until a fixed level of the 13.0.x stream is available.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.
EUVD-2026-106861
GHSA-whvr-2wmv-7ppj
NVD
CVE.org
EPSS
Exploit-DB