Skip to main content

HPE Networking CVE-2026-79884

| EUVDEUVD-2026-108384 HIGH
2026-10-22 security-alert@hpe.com GHSA-vv32-76mg-552q
8.2
CVSS 3.1 · Vendor: hpe
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Gain adjacent-network foothold
  2. Exploit
    Send crafted request to device
  3. Execution
    Trigger information disclosure
  4. Impact
    Harvest sensitive data across scope boundary

Vulnerability Assessment

Exploitation Conditions

Exploitation requires the attacker to occupy the same adjacent network (AV:A) as the affected HPE networking device - i.e., local-link or same-segment access, not internet-facing reach - which is the primary limiting factor. Per the CVSS vector the flaw is unauthenticated (PR:N) and needs no user interaction (UI:N), with low attack complexity (AC:L), so no credentials or victim action are required once network adjacency is achieved. The specific product feature, protocol, or configuration that triggers the disclosure is not described in the available sources (no description or CWE was provided), so no feature-level or configuration-level precondition can be confirmed; these should be verified against HPE bulletin hpesbnw05162en_us.

Impact

The CVSS 3.1 vector (AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:N/A:L, base 8.2) describes an adjacent-network, low-complexity, unauthenticated flaw with a changed scope, high confidentiality impact, no integrity impact, and low availability impact - consistent with the 'Information Disclosure' tag. The vuln.today decision label is 'this_week', indicating elevated but not emergency urgency. No EPSS score, no CISA KEV listing, and no PoC or exploit reference are present in the supplied data, so there is no evidence of active or probable near-term exploitation to corroborate the high base score; the 8.2 therefore reflects theoretical severity rather than demonstrated field risk. The adjacent attack vector (AV:A) is a meaningful limiter - the attacker must already be on the same logical/physical network segment (e.g., same L2 domain or local link) rather than reaching the target across the open internet, which narrows the realistic exposure. No vulnerability description or CWE was provided, so the trigger mechanism and the nature of the disclosed information are unverified; the analysis rests almost entirely on the CVSS metrics, the vendor source, and the single tag. This looks like a genuine but scoped priority: worth patching on the vendor's 'this_week' cadence, not an active-exploitation fire drill.

Exploit ScenarioDerived

An attacker positioned on the same adjacent network segment as a vulnerable HPE networking device sends traffic to it without needing credentials or user interaction, and receives back sensitive information that should not be exposed. Because scope is changed (S:C), the disclosed data may pertain to components or systems beyond the vulnerable component itself. No public exploit code or PoC reference is provided, so any attack would currently require independent development.

This Week Schedule remediation this week. Why: HIGH severity (CVSS 7.0-8.9).
No patch listed yet 0.2% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 22, 2026

Information disclosure in HPE networking devices allows unauthenticated attackers on the same adjacent network segment to obtain high-confidentiality data, with the CVSS 3.1 base score of 8.2 reflecting changed scope, no integrity impact, and low availability impact. The exact affected models, firmware versions, and trigger conditions are not described in the available sources; HPE bulletin hpesbnw05162en_us is the sole reference for scope and remediation. No public exploit code was identified at time of analysis.

RemediationAI

No vendor-released patch version is identified in the provided data; consult HPE bulletin hpesbnw05162en_us (https://support.hpe.com/hpesc/public/docDisplay?docId=hpesbnw05162en_us&docLocale=en_US) to confirm the fixed firmware or software release for each affected model and branch, and apply that update once the affected version is identified. The provided sources do not document a vendor-specific workaround, and because the CVSS vector requires adjacent-network positioning, same-segment exposure should be reviewed pending HPE guidance; no public exploit code was identified at time of analysis.

Affected VersionsENISA

Unknown product 8.12.0.0 ≤8.13.3.0
Unknown product 8.10.0.0 ≤8.10.0.23

Affected Packages

euvd unknown_product no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

The only technical classification supplied is the CVSS 3.1 vector AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:N/A:L and the Information Disclosure tag; no CWE is provided. That vector indicates the attacker must be positioned on the same adjacent network, needs no credentials, and requires no user interaction, with low attack complexity, changed scope, high confidentiality impact, no integrity impact, and low availability impact. The specific product feature, protocol, or configuration that triggers the disclosure is not described in the available sources, so no feature-level or configuration-level precondition can be confirmed. No CPE identifiers were supplied, and the HPE bulletin hpesbnw05162en_us is the only reference.

Know when Hpe gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (hpe) PRIMARY 8.2 HIGH
AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:N/A:L
vuln.today AI 8.2 HIGH

AV:A/PR:N/UI:N matches an unauthenticated adjacent-network reach; the information-disclosure tag drives C:H with I:N, and the scope change plus minor service effect yield S:C and A:L.

3.1 AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:N/A:L
4.0 AV:A/AC:L/AT:N/PR:N/UI:N/VC:H/VI:N/VA:L/SC:L/SI:N/SA:N

Primary rating from Vendor (hpe).

CVSS VectorVendor: hpe

Attack Vector
Adjacent
Attack Complexity
Low
Privileges Required
None
User Interaction
None
Scope
Changed
Confidentiality
High
Integrity
None
Availability
Low

DescriptionCVE.org

No description provided

Executive ViewAI

Why It Matters

HPE networking devices contain a high-severity information disclosure flaw that could allow attackers on the same network segment to access sensitive data without authentication. This puts organizations relying on HPE infrastructure at risk of data breaches, underscoring the need for immediate mitigation and vendor guidance.

Business Impact: High
Compensating Controls

No vendor-released patch identified at time of analysis. Interim mitigations include network segmentation to limit adjacent network access, restricting untrusted devices from the same segment, and monitoring for anomalous data access.

Threat Intelligence Overview

EPSS Score
0.2%
Top 95% exploitable
Prevalence
Medium
HPE networking appliance; common enterprise vendor but specific product/footprint unconfirmed
Data Quality
5 sources
Confidence: Medium

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity HIGH
CISA KEV No
Public POC No
EPSS 0.2%
Patch available No
Active threat No
Deciding rule
HIGH severity (CVSS 7.0-8.9)
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision· derived
Scheduled
Exploitation· derived
None
System Exposure· derived
Controlled
Automatable· derived
No
Human Impact
High

Priority Score

41
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +41
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.

More in Hpe

View all
CVE-2017-5689 CRITICAL POC
9.8 May 02

An unprivileged network attacker could gain system privileges to provisioned Intel manageability SKUs: Intel Active Mana

CVE-2016-7434 HIGH POC
7.5 Jan 13

The read_mru_list function in NTP before 4.2.8p9 allows remote attackers to cause a denial of service (crash) via a craf

CVE-2026-76708 CRITICAL POC
9.8 Sep 22

Default, hard-coded credentials shipped on several administrative and system accounts in HPE's Analytics and Location En

CVE-2024-53676 CRITICAL POC
9.8 Nov 27

A directory traversal vulnerability in Hewlett Packard Enterprise Insight Remote Support may allow remote code execution

CVE-2022-37932 CRITICAL POC
9.8 Dec 12

A potential security vulnerability has been identified in Hewlett Packard Enterprise OfficeConnect 1820, 1850, and 1920S

CVE-2020-7136 CRITICAL POC
9.8 Apr 30

A security vulnerability in HPE Smart Update Manager (SUM) prior to version 8.5.6 could allow remote unauthorized access

CVE-2025-37097 HIGH POC
7.5 Jul 01

A vulnerability in HPE Insight Remote Support (IRS) prior to v7.15.0.646 may allow an unauthenticated denial of service

CVE-2019-8936 HIGH POC
7.5 May 15

NTP through 4.2.8p12 has a NULL Pointer Dereference. Rated high severity (CVSS 7.5), this vulnerability is remotely expl

CVE-2026-79849 CRITICAL
10.0 Oct 22

A maximum-severity, network-reachable flaw (CVSS 3.1 base 10.0) in an as-yet-unnamed HPE product allows remote attackers

CVE-2026-79848 CRITICAL
10.0 Oct 22

Unauthenticated network attackers can potentially achieve high confidentiality, integrity, and availability impact again

CVE-2026-79851 CRITICAL
10.0 Oct 22

HPE security bulletin hpesbnw05162en_us documents a maximum-severity (CVSS 10.0) exposure in an HPE product that is not

CVE-2026-79847 CRITICAL
10.0 Oct 22

HPE advisory hpesbnw05162en_us covers a product flaw carrying a CVSS 3.1 base score of 10.0 (AV:N/AC:L/PR:N/UI:N/S:C/C:H

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy