Skip to main content

HPE Networking CVE-2026-79879

| EUVDEUVD-2026-108379 HIGH
2026-10-22 security-alert@hpe.com GHSA-5r49-45c5-5pcw
8.8
CVSS 3.1 · Vendor: hpe
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Gain adjacent-network foothold
  2. Exploit
    Send crafted traffic to HPE device
  3. Execution
    Trigger unauthenticated flaw (AC:L, PR:N)
  4. Impact
    Compromise device confidentiality/integrity/availability

Vulnerability Assessment

Exploitation Conditions

Exploitation requires the attacker to be on the network adjacent to the affected HPE networking device (CVSS AV:A - same broadcast/L2 domain or logically adjacent network, not the open internet); this adjacency requirement is the primary limiting factor and prevents direct internet-based attacks. Within that network position, no authentication (PR:N), no user interaction (UI:N), and only low attack complexity (AC:L) are needed against the device. The exact affected product, feature, protocol, configuration mode, and software versions are not stated in the available data (no description or advisory text provided), so the specific functional prerequisite cannot be named - consult HPE advisory hpesbnw05162en_us to identify the affected product and any configuration or version conditions.

Impact

The CVSS 3.1 base score is 8.8 (High) with vector AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H, meaning an unauthenticated attacker on the adjacent network (same L2 segment / logically adjacent, NOT the full internet) can achieve high impact to confidentiality, integrity, and availability with low complexity and no user interaction. The AV:A constraint is the single most important risk-reducing signal: exploitation requires a foothold on the local network segment of the affected HPE networking device, so this is not remotely internet-exploitable and real-world risk is gated by network position. No EPSS score, CISA KEV listing, SSVC automatable/technical-impact values, or POC/exploit reference is present in the input, so exploitation likelihood cannot be quantified from the data provided - the only prioritization signal is the vuln.today Decision label 'this_week', which indicates meaningful urgency but is below act_now/emergency. CONFLICT TO VERIFY: the sole tag is 'Information Disclosure', yet the CVSS vector asserts I:H and A:H (full integrity and availability compromise, not just disclosure) - the impact profile is broader than the tag implies; the HPE advisory should be consulted to confirm actual impact. Overall this is a genuinely high-severity networking flaw whose practical exploitability depends on adjacent-network access rather than widespread internet-facing exposure.

Exploit ScenarioDerived

An attacker who has gained a position on the same network segment as a vulnerable HPE networking device (e.g., via a compromised host, rogue device, or wireless foothold) sends crafted traffic to the device and, without credentials or user interaction, compromises its confidentiality, integrity, and availability. Because AC is low and no authentication is required, exploitation is straightforward for anyone with adjacent-network access. No public exploit identified at time of analysis, and the precise trigger is not described in the available sources.

This Week Schedule remediation this week. Why: HIGH severity (CVSS 7.0-8.9).
No patch listed yet 0.2% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 22, 2026

Unauthenticated attackers positioned on an adjacent network segment can compromise an HPE networking device with high impact to confidentiality, integrity, and availability, scored CVSS 3.1 8.8 (AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). The affected product line, feature, protocol, and version range are not stated in the supplied data, which contains no description and only a single HPE advisory reference (hpesbnw05162en_us); the one limiting prerequisite confirmed by the vector is network adjacency, meaning the attacker must share an L2 broadcast domain or logically adjacent network rather than reaching the device from the open internet. No public exploit code or KEV entry is indicated at time of analysis, the priority label is this_week, and no vendor-released fix version is specified in the available intelligence.

RemediationAI

No vendor-released patch or fixed version is identified in the available data, so remediation must begin by consulting HPE advisory hpesbnw05162en_us (https://support.hpe.com/hpesc/public/docDisplay?docId=hpesbnw05162en_us&docLocale=en_US) to confirm the affected product, the fixed firmware or software release, and any stated workarounds; do not assume a patch level before that advisory is checked. Because the assessed vector requires adjacent-network access (AV:A) with no authentication, no user interaction, and low complexity, the control that follows directly from the evidence is to constrain L2 adjacency to the affected device - isolate management and device-facing segments behind Layer 3 boundaries and ACLs, and restrict which hosts can share a broadcast domain with it - accepting that this reduces management reachability and adds segmentation overhead. The supplied data does not state any product-specific configuration toggle, protocol shutdown, or feature disable that would mitigate the issue, so no such step is asserted here. Prioritization is this_week per the vuln.today decision label; no public exploit code or CISA KEV entry is indicated at time of analysis.

Affected VersionsENISA

Unknown product 10.8.0.0 ≤10.8.1.1
Unknown product 10.3.0.0 ≤10.4.1.13
Unknown product 10.6.0.0 ≤10.7.2.6

Affected Packages

euvd unknown_product no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

The available sources classify this as CVE-2026-79879 with no CWE mapping and no description text, so the underlying component and root-cause class cannot be named from the supplied data. What is concrete is the assessed CVSS 3.1 vector AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H: the attack path is adjacent network (same broadcast/L2 domain or logically adjacent network), complexity is low, no privileges and no user interaction are required, scope is unchanged, and the resulting impact on confidentiality, integrity, and availability is each rated High. The accompanying tag of 'Information Disclosure' points toward data exposure, but it does not by itself explain the High integrity and availability components of the vector, and the available evidence does not reconcile the tag with the full C/I/A impact profile - that detail should be resolved from the HPE advisory rather than assumed. Because the vector requires AV:A rather than AV:N, the flaw is not reachable across the internet by default; the attacker must already have a foothold or presence on an adjacent network segment. No CPE identifiers were supplied, so the exact hardware model, firmware branch, and exposed service cannot be enumerated here.

Know when Hpe gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (hpe) PRIMARY 8.8 HIGH
AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
vuln.today AI 8.8 HIGH

AV:A and PR:N retained from the HPE-reported vector (adjacent, unauthenticated networking device); full C/I/A:H kept as no description justifies lowering any impact metric.

3.1 AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
4.0 AV:A/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N

Primary rating from Vendor (hpe).

CVSS VectorVendor: hpe

Attack Vector
Adjacent
Attack Complexity
Low
Privileges Required
None
User Interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

DescriptionCVE.org

No description provided

Executive ViewAI

Why It Matters

HPE networking devices are exposed to a high-severity vulnerability that allows unauthenticated attackers on an adjacent network segment to fully compromise confidentiality, integrity, and availability. Although remote exploitation is limited to local network adjacency, a single compromised internal host could pivot to critical network infrastructure, disrupting business operations and exposing sensitive data. Leadership should prioritize verification of exposure and implementation of interim controls until a vendor patch is available.

Business Impact: High
Compensating Controls

No vendor-released patch identified at time of analysis. Interim mitigations include strict network segmentation to limit adjacency, implementation of 802.1X authentication and port security, disabling unused services, and continuous monitoring for anomalous activity on adjacent network segments.

Threat Intelligence Overview

EPSS Score
0.2%
Top 90% exploitable
Prevalence
High
HPE networking (hpesbnw) appliances are widely deployed in enterprise environments
Data Quality
5 sources
Confidence: Medium

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity HIGH
CISA KEV No
Public POC No
EPSS 0.2%
Patch available No
Active threat No
Deciding rule
HIGH severity (CVSS 7.0-8.9)
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision· derived
Scheduled
Exploitation· derived
None
System Exposure· derived
Controlled
Automatable· derived
No
Human Impact
High

Priority Score

44
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +44
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.

More in Hpe

View all
CVE-2017-5689 CRITICAL POC
9.8 May 02

An unprivileged network attacker could gain system privileges to provisioned Intel manageability SKUs: Intel Active Mana

CVE-2016-7434 HIGH POC
7.5 Jan 13

The read_mru_list function in NTP before 4.2.8p9 allows remote attackers to cause a denial of service (crash) via a craf

CVE-2026-76708 CRITICAL POC
9.8 Sep 22

Default, hard-coded credentials shipped on several administrative and system accounts in HPE's Analytics and Location En

CVE-2024-53676 CRITICAL POC
9.8 Nov 27

A directory traversal vulnerability in Hewlett Packard Enterprise Insight Remote Support may allow remote code execution

CVE-2022-37932 CRITICAL POC
9.8 Dec 12

A potential security vulnerability has been identified in Hewlett Packard Enterprise OfficeConnect 1820, 1850, and 1920S

CVE-2020-7136 CRITICAL POC
9.8 Apr 30

A security vulnerability in HPE Smart Update Manager (SUM) prior to version 8.5.6 could allow remote unauthorized access

CVE-2025-37097 HIGH POC
7.5 Jul 01

A vulnerability in HPE Insight Remote Support (IRS) prior to v7.15.0.646 may allow an unauthenticated denial of service

CVE-2019-8936 HIGH POC
7.5 May 15

NTP through 4.2.8p12 has a NULL Pointer Dereference. Rated high severity (CVSS 7.5), this vulnerability is remotely expl

CVE-2026-79849 CRITICAL
10.0 Oct 22

A maximum-severity, network-reachable flaw (CVSS 3.1 base 10.0) in an as-yet-unnamed HPE product allows remote attackers

CVE-2026-79848 CRITICAL
10.0 Oct 22

Unauthenticated network attackers can potentially achieve high confidentiality, integrity, and availability impact again

CVE-2026-79851 CRITICAL
10.0 Oct 22

HPE security bulletin hpesbnw05162en_us documents a maximum-severity (CVSS 10.0) exposure in an HPE product that is not

CVE-2026-79847 CRITICAL
10.0 Oct 22

HPE advisory hpesbnw05162en_us covers a product flaw carrying a CVSS 3.1 base score of 10.0 (AV:N/AC:L/PR:N/UI:N/S:C/C:H

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy