Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessGain adjacent-network position
-
ExploitReach affected HPE networking device
-
ExecutionExploit undisclosed flaw without authentication
-
ImpactFull compromise of confidentiality, integrity and availability (scope change)
Vulnerability Assessment
| Exploitation Conditions | Exploitation requires the attacker to hold an Adjacent-network position relative to the affected HPE networking device (AV:A) - e.g. the same LAN segment, VLAN, or directly-attached network - so it is NOT exploitable from the open internet; this adjacency requirement is the primary limiting factor. Once adjacent, no authentication (PR:N) and no user interaction (UI:N) are needed, and attack complexity is low (AC:L). The specific product feature, protocol, or configuration that triggers the flaw is not described in the available sources (no description or CWE was provided), so the exact prerequisite feature/mode cannot be stated and must be confirmed against HPE bulletin hpesbnw05162en_us. |
| Impact | Signals are mixed in a way that warrants caution. The vendor-supplied CVSS 3.1 vector (AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H, base 9.6) describes a low-complexity, unauthenticated, no-interaction flaw with scope change and high confidentiality, integrity and availability impact - severe, but the Adjacent (AV:A) vector means it is NOT internet-remote and requires an attacker already positioned on the same logical/adjacent network segment, not arbitrary remote attackers. The vuln.today decision label is 'act_now', which signals real priority and should drive urgency. However, several key corroborating signals are MISSING from the provided data: no EPSS score, no CISA KEV entry, and no PoC/exploit reference are present, so there is no public exploit identified at time of analysis and no probability estimate to confirm or temper the 'act_now' label. There is also a conflict: the single tag reads 'Information Disclosure', yet the CVSS vector asserts I:H and A:H (full integrity and availability loss), so this is not a pure disclosure issue - the tag understates the impact. Finally, no description and no CWE were provided, so the trigger mechanism is not described in the available sources - verify affected products, versions, and fixes directly against HPE bulletin hpesbnw05162en_us before acting. |
| Exploit ScenarioDerived | An attacker who has gained a foothold on the same adjacent network as an affected HPE networking device interacts with it over that network with no credentials and no user interaction, exploiting an undisclosed flaw to compromise the device. Because the CVSS scope is Changed (S:C), the impact can extend beyond the vulnerable component to other systems. No public exploit code is identified in the available data, and the exact trigger is not described in the referenced sources. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 22, 2026
High-severity (CVSS 9.6) compromise of HPE networking devices is possible from an adjacent-network position: an unauthenticated attacker on the same LAN segment, VLAN, or directly attached network can trigger the flaw with low complexity and no user interaction, and the changed-scope impact is rated high for confidentiality, integrity, and availability. The source tag labels this as Information Disclosure, while the assessed vector also scores high integrity and availability impact; the specific triggering feature or protocol is not described in the supplied sources. HPE's bulletin is the sole reference, no public exploit is identified at time of analysis, and the vuln.today priority is act_now.
RemediationAI
No vendor-released patch version is identified in the supplied data; HPE bulletin hpesbnw05162en_us is the authoritative source for the fixed firmware, affected model list, and any vendor workaround. Until fixed firmware is confirmed for a given device, reduce exposure to the AV:A attack path by preventing Layer 2 adjacency from untrusted segments to affected devices, for example by separating VLANs and using ACLs or firewalls to deny inter-segment access to the device; the trade-off is added operational segmentation and possible management complexity, and this does not remediate the underlying flaw. Confirm the exact fixed release and any additional HPE-specific mitigations directly in the bulletin before closing the exposure.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The affected technology is HPE networking equipment, but the supplied intelligence does not identify a specific protocol, management interface, daemon, or firmware subsystem. The CVSS vector places the attack on an adjacent network (AV:A), with no privileges required (PR:N), no user interaction (UI:N), low attack complexity (AC:L), and changed scope (S:C); the vector rates high confidentiality, integrity, and availability impact. The source tag 'Information Disclosure' points to a confidentiality-focused issue, but the same vector also scores high integrity and availability impact, so the supplied sources do not reconcile whether the flaw is purely disclosure or includes broader device impact. The root-cause class cannot be mapped because CWE is not provided, and no CPE strings were supplied. The trigger condition is not described in the available sources and must be confirmed against HPE bulletin hpesbnw05162en_us.
Know when Hpe gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H
No description was supplied, so metrics adopt the vendor vector: Adjacent access with no auth or interaction, scope change, and high impact to all three; AV:A limits reach to the local/adjacent network.
Primary rating from Vendor (hpe).
CVSS VectorVendor: hpe
DescriptionCVE.org
No description provided
Executive ViewAI
HPE networking devices face a critical unauthenticated vulnerability (CVE-2026-79868) that can be exploited by anyone on the same local network segment, leading to full compromise of confidentiality, integrity, and availability of affected devices. This puts network infrastructure at risk of unauthorized access, data leakage, and disruption, requiring immediate leadership attention to mitigate potential operational and security impacts.
No vendor-released patch identified at time of analysis. Enforce network segmentation to limit adjacency, restrict local network access to trusted devices only, monitor for unauthorized access attempts, and apply any workarounds provided by HPE.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.
An unprivileged network attacker could gain system privileges to provisioned Intel manageability SKUs: Intel Active Mana
The read_mru_list function in NTP before 4.2.8p9 allows remote attackers to cause a denial of service (crash) via a craf
Default, hard-coded credentials shipped on several administrative and system accounts in HPE's Analytics and Location En
A directory traversal vulnerability in Hewlett Packard Enterprise Insight Remote Support may allow remote code execution
A potential security vulnerability has been identified in Hewlett Packard Enterprise OfficeConnect 1820, 1850, and 1920S
A security vulnerability in HPE Smart Update Manager (SUM) prior to version 8.5.6 could allow remote unauthorized access
A vulnerability in HPE Insight Remote Support (IRS) prior to v7.15.0.646 may allow an unauthenticated denial of service
NTP through 4.2.8p12 has a NULL Pointer Dereference. Rated high severity (CVSS 7.5), this vulnerability is remotely expl
A maximum-severity, network-reachable flaw (CVSS 3.1 base 10.0) in an as-yet-unnamed HPE product allows remote attackers
Unauthenticated network attackers can potentially achieve high confidentiality, integrity, and availability impact again
HPE security bulletin hpesbnw05162en_us documents a maximum-severity (CVSS 10.0) exposure in an HPE product that is not
HPE advisory hpesbnw05162en_us covers a product flaw carrying a CVSS 3.1 base score of 10.0 (AV:N/AC:L/PR:N/UI:N/S:C/C:H
EUVD-2026-108368
GHSA-jp54-cg9f-pfj9
NVD
CVE.org
EPSS
VulDB
Exploit-DB