Skip to main content

HPE Networking CVE-2026-79867

| EUVDEUVD-2026-108367 CRITICAL
2026-10-22 security-alert@hpe.com GHSA-r3g2-qpfx-rpc4
9.6
CVSS 3.1 · Vendor: hpe
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Gain foothold on adjacent network segment
  2. Delivery
    Send crafted traffic to affected HPE device
  3. Exploit
    Trigger unauthenticated low-complexity flaw
  4. Execution
    Compromise component and cross security scope
  5. Impact
    Impact confidentiality, integrity and availability

Vulnerability Assessment

Exploitation Conditions

The trigger is not described in the available sources - no CVE description, CWE, or affected-version data was provided, so the exact product feature, protocol, or configuration required cannot be named. What the data does establish as limiting factors: exploitation requires adjacent-network positioning (AV:A), meaning the attacker must reach the device from the same or a logically adjacent network segment rather than across the open internet; no authentication is required (PR:N) and no user interaction is needed (UI:N); attack complexity is low (AC:L); and the impact crosses a security scope boundary (S:C). The affected asset is an HPE networking product per the referenced bulletin (hpesbnw05162en_us). Defenders should consult the HPE advisory directly to identify affected models, versions, and any configuration preconditions, as these are not present in the supplied intelligence.

Impact

Signals are mixed and partly incomplete. The vendor-supplied CVSS 3.1 base score is 9.6 (Critical) with a scope-changed vector (AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H), meaning an unauthenticated attacker with low attack complexity and no user interaction can achieve high confidentiality, integrity and availability impact that crosses a security boundary. The vuln.today decision label is act_now, which argues for urgent remediation. However, two things temper raw-score panic: the attack vector is Adjacent (AV:A), not Network (AV:N) - exploitation requires a foothold on the same logical/adjacent network segment rather than arbitrary internet reachability, which materially narrows the exposed population to attackers already on or bridged into the local network. Critically, no EPSS score, no CISA KEV listing, and no PoC/exploit reference are present in the input, so there is no public-exploitation signal to corroborate the act_now urgency; the high priority here appears to be driven by the severity vector and vendor advisory rather than by observed exploitation. There is no description and no CWE, so the vulnerability class and trigger mechanism are unknown. One clear conflict: the only tag is 'Information Disclosure', yet the CVSS vector asserts full C:H/I:H/A:H impact - the tag understates the stated impact and should not be relied on. Net: treat as a high-priority patch for affected HPE networking devices reachable on adjacent segments, but recognize the adjacent-only vector and absence of exploitation evidence make this more a 'patch promptly on exposed gear' item than a confirmed mass-exploitation emergency.

Exploit ScenarioDerived

An attacker who has already gained access to an adjacent network segment (for example a compromised host, rogue device, or bridged VLAN near the affected HPE networking product) sends crafted traffic to the device and triggers the unauthenticated flaw, gaining high impact to confidentiality, integrity and availability with a scope change beyond the vulnerable component. No user interaction is required and attack complexity is low, but internet-wide remote exploitation is not indicated because the vector is Adjacent, not Network. No public exploit code or PoC reference is present in the supplied data.

Act Now Prioritize within 24-48h. Why: CRITICAL severity.
No patch listed yet 0.2% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 22, 2026

HPE networking products are affected by a CVSS 9.6 scope-changing flaw (CVE-2026-79867) tagged as information disclosure but assessed with high confidentiality, integrity, and availability impact. Exploitation requires adjacent-network positioning with no authentication and no user interaction, while affected models and firmware versions are not enumerated in the supplied data. The priority label is act_now; no CISA KEV entry or public exploit reference was supplied, so no public exploit is identified at time of analysis.

RemediationAI

No vendor-released patch or fixed version is identified in the supplied data, so an exact upgrade target cannot be stated. Review HPE bulletin hpesbnw05162en_us for fixed firmware, affected models, and any vendor workarounds, and apply the HPE update as the complete fix. If the bulletin cannot be applied immediately, the only control directly supported by the assessed vector is to prevent adjacent-network access to the affected HPE device, for example by separating it from untrusted Layer 2 and Layer 3 segments; the vendor has not confirmed the effectiveness of this compensating control in the supplied sources, and it does not replace the vendor fix.

Affected VersionsENISA

Unknown product 8.12.0.0 ≤8.13.3.0
Unknown product 8.10.0.0 ≤8.10.0.23

Affected Packages

euvd unknown_product no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

No CWE or CPE data was provided, so the vulnerable code path, protocol, and product feature cannot be named. The assessed CVSS vector AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H establishes several limiting and amplifying factors: the attacker must reach the device from the same or a logically adjacent network segment (AV:A), attack complexity is low (AC:L), no authentication is required (PR:N), and no user interaction is needed (UI:N). The scope change (S:C) means the vulnerable component can affect resources beyond its own security authority, while the impact ratings indicate high confidentiality, integrity, and availability consequences. The trigger is not described in the available sources; the only product reference is the HPE security bulletin hpesbnw05162en_us.

Know when Hpe gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (hpe) PRIMARY 9.6 CRITICAL
AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H
vuln.today AI 9.6 CRITICAL

No description is available to revise the metrics, so this mirrors the only supplied signal; AV:A reflects the adjacent-network bulletin context and S:C the stated cross-boundary impact - metrics are not independently verifiable.

3.1 AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H
4.0 AV:A/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N

Primary rating from Vendor (hpe).

CVSS VectorVendor: hpe

Attack Vector
Adjacent
Attack Complexity
Low
Privileges Required
None
User Interaction
None
Scope
Changed
Confidentiality
High
Integrity
High
Availability
High

DescriptionCVE.org

No description provided

Executive ViewAI

Why It Matters

A critical unauthenticated vulnerability (CVE-2026-79867) in HPE networking products allows attackers on the adjacent network to cause high confidentiality, integrity, and availability impact across affected devices. Since the flaw requires no credentials and no user interaction, any compromised host on the same network segment can exploit it, potentially disrupting network operations and exposing sensitive data enterprise-wide.

Business Impact: High
Compensating Controls

No vendor-released patch identified at time of analysis. Interim mitigations include segmenting and isolating affected HPE networking devices, enforcing strict ACLs to limit adjacent-network access, disabling unnecessary services, and monitoring for unusual adjacent-to-adjacent traffic patterns. Engage HPE support for model-specific guidance.

Threat Intelligence Overview

EPSS Score
0.2%
Top 93% exploitable
Prevalence
Medium
HPE enterprise networking product per advisory; specific device and install base unconfirmed
Data Quality
5 sources
Confidence: Medium

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity CRITICAL
CISA KEV No
Public POC No
EPSS 0.2%
Patch available No
Active threat No
Deciding rule
CRITICAL severity
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision· derived
Scheduled
Exploitation· derived
None
System Exposure· derived
Controlled
Automatable· derived
No
Human Impact
High

Priority Score

48
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +48
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.

More in Hpe

View all
CVE-2017-5689 CRITICAL POC
9.8 May 02

An unprivileged network attacker could gain system privileges to provisioned Intel manageability SKUs: Intel Active Mana

CVE-2016-7434 HIGH POC
7.5 Jan 13

The read_mru_list function in NTP before 4.2.8p9 allows remote attackers to cause a denial of service (crash) via a craf

CVE-2026-76708 CRITICAL POC
9.8 Sep 22

Default, hard-coded credentials shipped on several administrative and system accounts in HPE's Analytics and Location En

CVE-2024-53676 CRITICAL POC
9.8 Nov 27

A directory traversal vulnerability in Hewlett Packard Enterprise Insight Remote Support may allow remote code execution

CVE-2022-37932 CRITICAL POC
9.8 Dec 12

A potential security vulnerability has been identified in Hewlett Packard Enterprise OfficeConnect 1820, 1850, and 1920S

CVE-2020-7136 CRITICAL POC
9.8 Apr 30

A security vulnerability in HPE Smart Update Manager (SUM) prior to version 8.5.6 could allow remote unauthorized access

CVE-2025-37097 HIGH POC
7.5 Jul 01

A vulnerability in HPE Insight Remote Support (IRS) prior to v7.15.0.646 may allow an unauthenticated denial of service

CVE-2019-8936 HIGH POC
7.5 May 15

NTP through 4.2.8p12 has a NULL Pointer Dereference. Rated high severity (CVSS 7.5), this vulnerability is remotely expl

CVE-2026-79849 CRITICAL
10.0 Oct 22

A maximum-severity, network-reachable flaw (CVSS 3.1 base 10.0) in an as-yet-unnamed HPE product allows remote attackers

CVE-2026-79848 CRITICAL
10.0 Oct 22

Unauthenticated network attackers can potentially achieve high confidentiality, integrity, and availability impact again

CVE-2026-79851 CRITICAL
10.0 Oct 22

HPE security bulletin hpesbnw05162en_us documents a maximum-severity (CVSS 10.0) exposure in an HPE product that is not

CVE-2026-79847 CRITICAL
10.0 Oct 22

HPE advisory hpesbnw05162en_us covers a product flaw carrying a CVSS 3.1 base score of 10.0 (AV:N/AC:L/PR:N/UI:N/S:C/C:H

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy