Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessReach network-exposed HPE service
-
ExploitExploit unauthenticated low-complexity flaw
-
ImpactFull compromise of confidentiality, integrity, availability
Vulnerability Assessment
| Exploitation Conditions | The supplied CVSS vector (AV:N/AC:L/PR:N/UI:N) indicates remote, unauthenticated exploitation with no user interaction against a network-reachable HPE networking product, implying no special preconditions. However, this cannot be confirmed because no CVE description, affected-product name, configuration detail, or deployment-mode information was provided, and the HPE bulletin could not be retrieved. Therefore the concrete prerequisites (specific feature, protocol, port, or non-default setting) and any limiting factors are not described in the available sources; the only limiter evidenced is network reachability to the affected service. Authentication is unauthenticated per PR:N. |
| Impact | The input assigns CVSS 3.1 9.8 (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H): network-reachable, low-complexity, unauthenticated (PR:N) exploitation with high confidentiality, integrity AND availability impact. The vuln.today decision label is 'act_now,' and the issue was reported through HPE's PSIRT (security-alert@hpe.com) and published in an HPE networking security bulletin (hpesbnw05162en_us); together these signal vendor-driven urgency that, per the decision label, should be treated as an immediate priority. However, key corroborating signals are MISSING: no EPSS probability, no CISA KEV entry, and no PoC/exploit reference are supplied, so there is no public exploit identified at time of analysis and no independent exploitation-likelihood data behind the 'act_now' call - the urgency currently rests on the vendor advisory plus the critical CVSS, not on observed exploitation. There is also a direct conflict in the metadata: the sole tag 'Information Disclosure' implies confidentiality-only impact (which would be C:H/I:N/A:N), yet the supplied vector asserts full I:H/A:H as well; these cannot both be correct and must be reconciled against the HPE bulletin. Additionally, no description, no CWE, no affected-product name, and no fixed version are provided, so mechanism and scope cannot be verified from the available data. Net: handle as high priority consistent with the 'act_now' label and 9.8 score, while noting the rating is almost entirely vector/vendor-driven rather than exploitation-evidenced. |
| Exploit ScenarioDerived | Per the CVSS vector, a remote, unauthenticated attacker with network access to the affected HPE networking product sends crafted traffic to the exposed service and, with low attack complexity and no user interaction, gains high impact to confidentiality, integrity, and availability. No PoC or exploit reference is provided, so no public exploit is identified at time of analysis. The specific trigger is not described in the available sources - no CVE description or CWE was supplied - so the exact mechanism cannot be stated. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 22, 2026
Unauthenticated, network-reachable exploitation of an HPE networking product carries a CVSS 3.1 score of 9.8 (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H), meaning an attacker with only network access could achieve high confidentiality, integrity and availability impact without credentials or user interaction. The only source in the supplied intelligence is the HPE security bulletin hpesbnw05162en_us; no CVE description, CWE, CPE, affected version list or fixed-version information was provided, so the specific vulnerable component and the trigger conditions are not described in the available sources. The vuln.today decision label is act_now, and no KEV listing or public exploit code was identified at time of analysis, though the bulletin itself could not be retrieved to confirm either signal. The supplied tag reads 'Information Disclosure', which is narrower than the assessed high impact on all three security pillars and should not be relied on as a description of scope.
RemediationAI
No fixed version or patch identifier is present in the supplied data, so no vendor-released patch version can be cited; the authoritative remediation detail must come from the HPE bulletin hpesbnw05162en_us at https://support.hpe.com/hpesc/public/docDisplay?docId=hpesbnw05162en_us&docLocale=en_US, which should be retrieved and applied as soon as an update is published, consistent with the act_now priority label. The bulletin is also the only place an official workaround would be documented, and none is described in the available sources. The single evidenced limiting factor is network reachability to the affected service, so pending a fix the actionable control is to restrict reachability of the affected HPE networking interface to trusted management networks or VPN-only access and to remove any internet-facing exposure; the trade-off is loss of direct remote access for legitimate administrators and users, requiring alternate access paths. Because the vulnerable component is unknown, do not assume that disabling any specific feature mitigates the issue without confirmation from the vendor bulletin.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
No CWE is assigned in the supplied data, so the root-cause class (for example injection, memory-safety, authentication bypass, or parser handling) cannot be attributed and the trigger is not described in the available sources. The CVSS vector establishes only severity characteristics: AV:N means the attack surface is reachable over the network, AC:L means no unusual conditions are required per the scoring, PR:N means no authentication is needed, UI:N means no victim interaction, S:U means impact stays within the vulnerable component's security authority, and C:H/I:H/A:H means full compromise of confidentiality, integrity and availability. No CPE strings were supplied, so the exact product line, firmware branch, exposed protocol or management interface cannot be identified from this data set; the bulletin identifier hpesbnw05162en_us is the only product-scoping artifact and it is hosted on HPE's support portal (support.hpe.com), which is consistent with an HPE networking security bulletin but does not by itself confirm the affected platform. Because the deployment mode, port, protocol and configuration prerequisites are undocumented here, the only evidenced limiting factor is whether the affected service is reachable from the attacker's network position.
Know when Hpe gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Primary rating from Vendor (hpe) · only source for this CVE.
CVSS VectorVendor: hpe
DescriptionCVE.org
No description provided
Executive ViewAI
HPE networking products contain a critical, unauthenticated network-exploitable vulnerability (CVE-2026-79859) that could allow attackers to compromise confidentiality, integrity, and availability of network infrastructure. While no active exploitation has been confirmed, the ease of exploitation and potential for broad impact make this a priority for security leadership.
No vendor-released patch identified at time of analysis; apply interim mitigations such as network segmentation, management access restriction, and enhanced monitoring.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.
An unprivileged network attacker could gain system privileges to provisioned Intel manageability SKUs: Intel Active Mana
The read_mru_list function in NTP before 4.2.8p9 allows remote attackers to cause a denial of service (crash) via a craf
Default, hard-coded credentials shipped on several administrative and system accounts in HPE's Analytics and Location En
A directory traversal vulnerability in Hewlett Packard Enterprise Insight Remote Support may allow remote code execution
A potential security vulnerability has been identified in Hewlett Packard Enterprise OfficeConnect 1820, 1850, and 1920S
A security vulnerability in HPE Smart Update Manager (SUM) prior to version 8.5.6 could allow remote unauthorized access
A vulnerability in HPE Insight Remote Support (IRS) prior to v7.15.0.646 may allow an unauthenticated denial of service
NTP through 4.2.8p12 has a NULL Pointer Dereference. Rated high severity (CVSS 7.5), this vulnerability is remotely expl
A maximum-severity, network-reachable flaw (CVSS 3.1 base 10.0) in an as-yet-unnamed HPE product allows remote attackers
Unauthenticated network attackers can potentially achieve high confidentiality, integrity, and availability impact again
HPE security bulletin hpesbnw05162en_us documents a maximum-severity (CVSS 10.0) exposure in an HPE product that is not
HPE advisory hpesbnw05162en_us covers a product flaw carrying a CVSS 3.1 base score of 10.0 (AV:N/AC:L/PR:N/UI:N/S:C/C:H
EUVD-2026-108359
GHSA-8r2w-2fj5-gg7j
NVD
CVE.org
EPSS
VulDB
Exploit-DB