Skip to main content

Lanscope Endpoint Manager CVE-2025-61932

CRITICAL
Improper Verification of Source of a Communication Channel (CWE-940)
2025-10-20 vultures@jpcert.or.jp
9.3
CVSS 4.0 · Vendor: jpcert
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Reach MR/DA listening component over network
  2. Delivery
    Send specially crafted request packets
  3. Exploit
    Bypass improper origin verification (CWE-940)
  4. Execution
    Trigger arbitrary code execution
  5. Impact
    Full compromise of managed endpoint

Vulnerability Assessment

Weakness
CWE
OWASP Top 10:2025
A07:2025 - Authentication Failures
ASVS 5.0
V12 - Secure Communication Communication channel verification
Exploitation Conditions

Applies specifically to the On-Premises edition of Lanscope Endpoint Manager - the affected components are the Client program (MR) and the Detection agent (DA), so a vulnerable MR or DA instance must be installed and its request-handling service reachable from the attacker. The core condition is that these components improperly verify the origin of incoming requests, so an attacker only needs to send specially crafted packets to the listening component; per the CVSS vector no authentication (PR:N) and no user interaction (UI:N) are required. Limiting factors that reduce real-world exposure: the attacker must have network reachability to the MR/DA listener (typically the internal management network rather than the public internet), and only the on-premises product is in scope - cloud/SaaS editions are not implicated by the CPE strings.

Impact

This is a genuine top-priority vulnerability, not a high-CVSS-but-low-risk case. The provided CVSS 4.0 vector (AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H, base 9.3) describes unauthenticated, network-reachable, low-complexity remote code execution with full confidentiality, integrity, and availability impact on the vulnerable system - the worst-case profile for an exploitability standpoint. The input includes a CISA Known Exploited Vulnerabilities catalog reference filtered to this exact CVE, indicating KEV listing and therefore confirmed active exploitation in the real world, which decisively elevates priority regardless of any statistical model. Note the signal limits: no EPSS probability score and no explicit POC flag were supplied in the input, so exploitation-probability modeling and public exploit-code status cannot be independently confirmed here - but KEV status makes those secondary, since confirmed exploitation outweighs a predictive EPSS value. CWE-940 (Improper Verification of Source of a Communication Channel) is consistent with the description's 'improperly verifies the origin of incoming requests,' corroborating the attack-vector claim. The one caveat defenders should verify: the CVSS asserts AV:N, and because the affected components are an endpoint client (MR) and detection agent (DA), real-world reachability depends on whether those listening services are exposed beyond the management segment - confirm network exposure with the vendor/JPCERT advisory.

Exploit ScenarioDerived

An attacker with network reachability to a host running the Lanscope Endpoint Manager Client program (MR) or Detection agent (DA) sends specially crafted packets that the component fails to validate for proper origin. Because the request origin is not verified, the attacker's packets are accepted and processed, leading to arbitrary code execution on the endpoint without authentication or user interaction. This vulnerability is listed in the CISA KEV catalog per the provided reference, indicating it has been exploited in real-world attacks; independent public POC/exploit-code availability was not provided in the input.

Act Now Prioritize within 24-48h. Why: CRITICAL + in CISA KEV (actively exploited), no patch available.
Exploited in the wild (CISA KEV) No patch listed yet 2.8% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 08, 2026

Remote code execution in Lanscope Endpoint Manager (On-Premises) allows unauthenticated attackers to execute arbitrary code by sending specially crafted packets to the Client program (MR) or Detection agent (DA), as these components improperly verify the origin of incoming requests (CWE-940). The vulnerability affects the on-premises edition only and has been confirmed actively exploited (CISA KEV), requiring no authentication or user interaction (CVSS 4.0 base 9.3). Network reachability to the MR/DA listener is the primary prerequisite, typically limiting exposure to internal management networks.

RemediationAI

Apply the vendor-released patch as described in the Motex advisory (https://www.motex.co.jp/news/notice/2025/release251020/); the advisory provides the specific updated version for the Client program (MR) and Detection agent (DA). Until patching is possible, restrict network access to the MR/DA listeners-these services should only be reachable from trusted management networks. Deploy firewall rules or network segmentation to block inbound traffic on the management ports from untrusted segments, and monitor for anomalous packets targeting those services. Because the vulnerability requires no authentication, any host with network reachability can exploit it; thus, reducing the attack surface via strict access controls is critical. Note that blocking legitimate management traffic may disrupt operations, so coordinate with IT operations before implementing such controls. Also review the JVN advisory (https://jvn.jp/en/jp/JVN86318557/) for additional mitigations.

Affects your stack

Find out whether the stacks and servers you run are on an affected version.

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

The vulnerability resides in the Lanscope Endpoint Manager on-premises components-specifically the Client program (MR) and Detection agent (DA)-which are responsible for receiving and processing management requests. CWE-940 (Improper Verification of Source of a Communication Channel) indicates that the software does not validate the origin of incoming network packets, allowing a remote attacker to spoof or inject commands that lead to arbitrary code execution. The affected product is identified by vendor Motex in CPE strings for 'lanscope_endpoint_manager' with the 'on-premise' edition, and the CVSS 4.0 vector (AV:N/AC:L/AT:N/PR:N/UI:N) confirms the attack is network-based, unauthenticated, and requires no user interaction. This class of flaw is particularly dangerous in endpoint management agents because they often run with high privileges and are trusted by the broader management infrastructure.

Know when Lanscope Endpoint Manager gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (jpcert) PRIMARY 9.3 CRITICAL
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N
vuln.today AI 9.8 CRITICAL

Improper origin verification lets unauthenticated remote packets trigger code execution (AV:N/AC:L/PR:N/UI:N); full host compromise gives C:H/I:H/A:H with no scope change.

3.1 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
4.0 AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N

Primary rating from Vendor (jpcert).

CVSS VectorVendor: jpcert

Attack Vector
Network
Attack Complexity
Low
Attack Requirements
None
Privileges Required
None
User Interaction
None
Vulnerable system: Confidentiality
High
Vulnerable system: Integrity
High
Vulnerable system: Availability
High
Subsequent system: Confidentiality
None
Subsequent system: Integrity
None
Subsequent system: Availability
None

Lifecycle Timeline

2
Added to CISA KEV
Oct 08, 2026 - 22:48 CISA
CVE Published
Oct 20, 2025 - 08:15 cve.org
CRITICAL 9.3

DescriptionCVE.org

Lanscope Endpoint Manager (On-Premises) (Client program (MR) and Detection agent (DA)) improperly verifies the origin of incoming requests, allowing an attacker to execute arbitrary code by sending specially crafted packets.

Executive ViewAI

Why It Matters

Lanscope Endpoint Manager (On-Premises) is affected by a critical remote code execution flaw that allows attackers to run arbitrary code on the management server (MR) and detection agent (DA) components without authentication or user interaction, and it is confirmed actively exploited (CISA KEV). Organizations running the on-premises edition are exposed anywhere those listeners are reachable, which typically means internal management networks - the very systems used to control and monitor every managed endpoint in the estate. Because no vendor patch is available yet, leadership should treat this as an active, unmitigated threat to the integrity of the endpoint management plane itself, and prioritize containment over remediation.

Business Impact: Severe
Compensating Controls

No vendor-released patch identified at time of analysis. Interim mitigations: restrict network reachability to the MR/DA listener ports to a minimal set of trusted administrative hosts via firewall rules, ACLs, or VLAN segmentation; isolate the on-premises management server from user networks, VPN client pools, and internet exposure; disable the detection agent (DA) or client program (MR) on hosts where it is not operationally required; enable and centralize logging on MR/DA hosts and monitor for anomalous traffic and process execution; and maintain an active compromise-hunting and incident-response posture until a vendor patch is released.

Threat Intelligence Overview

EPSS Score
2.8%
Top 14% exploitable
Prevalence
Medium
Motex endpoint-management suite, widely deployed in Japan, limited global footprint
Data Quality
2 sources
Confidence: Low

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity CRITICAL
CISA KEV Yes
Public POC No
EPSS 2.8%
Patch available No
Active threat Yes
Deciding rule
CRITICAL + in CISA KEV (actively exploited), no patch available
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision· derived
Out-of-Cycle
Exploitation· derived
Active
System Exposure· derived
Open
Automatable· derived
Yes
Human Impact
Very High

Priority Score

99
Low Medium High Critical
KEV: +50
EPSS: +3
CVSS: +46
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

Remote Code Execution represents the critical moment when an attacker successfully runs arbitrary code on a target system without physical access.

Affected Products (CPE)CVE.org

cpe:2.3:a:motex:lanscope_endpoint_manager:*:*:*:*:on-premise:*:*:*
cpe:2.3:a:motex:lanscope_endpoint_manager:*:*:*:*:on-premise:*:*:*
cpe:2.3:a:motex:lanscope_endpoint_manager:*:*:*:*:on-premise:*:*:*
cpe:2.3:a:motex:lanscope_endpoint_manager:*:*:*:*:on-premise:*:*:*
cpe:2.3:a:motex:lanscope_endpoint_manager:*:*:*:*:on-premise:*:*:*
cpe:2.3:a:motex:lanscope_endpoint_manager:*:*:*:*:on-premise:*:*:*
cpe:2.3:a:motex:lanscope_endpoint_manager:*:*:*:*:on-premise:*:*:*
cpe:2.3:a:motex:lanscope_endpoint_manager:*:*:*:*:on-premise:*:*:*
cpe:2.3:a:motex:lanscope_endpoint_manager:*:*:*:*:on-premise:*:*:*
cpe:2.3:a:motex:lanscope_endpoint_manager:*:*:*:*:on-premise:*:*:*

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy