Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessReach printer web management interface on network
-
DeliverySend unauthenticated file-upload HTTP request
-
ExploitBypass absent authentication (CWE-306)
-
ExecutionTrigger execution of uploaded file
-
PersistRun arbitrary commands on device
-
ImpactPivot into OT network
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A07:2025 - Authentication Failures
ASVS 5.0
V6 - Authentication Authentication required for critical functions
MITRE ATT&CK
1 technique across 1 tactic: Initial Access The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Exploitation requires network access to the Honeywell PD45 Industrial Printer web management interface running firmware F10.19.010040; no authentication, credentials, or user interaction are needed (CWE-306, PR:N/UI:N). The single concrete prerequisite is reachability of that HTTP management interface. The primary limiting factor is exposure: as an OT/industrial printer, this interface is typically deployed on internal warehouse/manufacturing networks rather than internet-facing, so an attacker generally needs an existing network foothold. Patched firmware F10.22.030745 remediates the flaw, so only unpatched devices at the affected version are exploitable. |
| Impact | Every core signal points to maximum severity: CVSS 3.1 base 9.8 with AV:N/AC:L/PR:N/UI:N and C:H/I:H/A:H describes an unauthenticated, low-complexity, network-reachable RCE requiring no user interaction, and CWE-306 (missing authentication) matches the description's 'without requiring authentication' arbitrary file upload. This is a genuine high-priority issue, not an inflated score - the vector and the description are fully consistent. However, the softening signals matter for prioritization: there is no EPSS score, no CISA KEV listing, and no public POC in the provided data, so exploitation status is 'no public exploit identified at time of analysis' rather than active/widespread. The realistic risk is heavily governed by exposure: the PD45 is an OT/industrial label printer whose web management interface is typically on internal warehouse/manufacturing networks rather than the public internet, so 'network' reachability in practice usually means an attacker already on the LAN. Net assessment: critical technical impact and trivial exploitability, but likely opportunistic/targeted rather than mass-exploited given the niche device footprint and lack of exploitation telemetry. |
| Exploit ScenarioDerived | An attacker with network reach to the printer's web management interface (e.g., a foothold on the same OT/warehouse LAN) sends an HTTP request that uploads an attacker-controlled file without any credentials, then triggers execution of the uploaded file to run commands on the device. No POC is present in the provided data, and no authentication or user interaction is required per the CVSS vector (PR:N/UI:N), so a single request against a default deployment is sufficient. Success yields full compromise of the printer (C:H/I:H/A:H), usable as a pivot into the industrial network. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Sep 24, 2026
Unauthenticated remote code execution in Honeywell PD45 Industrial Printer firmware F10.19.010040 lets any network-reachable attacker upload attacker-controlled files through the web management interface and execute them as malicious files and commands. The CVSS 3.1 base score of 9.8 (AV:N/AC:L/PR:N/UI:N, C:H/I:H/A:H) reflects the complete absence of authentication or user interaction required, consistent with CWE-306 missing authentication for a critical function, so a single unauthenticated HTTP request path is enough to gain code execution on the device. Honeywell has released fixed firmware F10.22.030745; no public exploit code has been identified at time of analysis, but exposure is constrained mainly by the fact that these industrial printers typically sit on internal warehouse or manufacturing networks rather than the public internet, meaning an attacker usually needs an existing network foothold or adjacent access first.
RemediationAI
Apply the vendor-released patch: upgrade Honeywell PD45 Industrial Printer firmware to F10.22.030745 or later, which explicitly includes the fix for this vulnerability; see the Honeywell product security notices page at https://www.honeywell.com/us/en/legal/product-security#security-notices for the update package and procedures. Until firmware can be upgraded, the most effective compensating control is to remove reachability of the web management interface from untrusted networks: segment PD45 printers onto a dedicated OT/industrial VLAN, and block inbound HTTP/HTTPS to the device management port at the firewall or switch ACL so only authorized administrative hosts can connect - the trade-off is that remote configuration, firmware push, and monitoring from the corporate LAN stop working until the rule is scoped to specific management stations. If the web management interface is not operationally required, disable it entirely on the device (trade-off: configuration and diagnostics must then be done locally via the printer's panel or USB/utility tooling). Where an ACL is not feasible, restrict access by source-IP allowlisting and enforce that any exposed instance is reachable only through a VPN or jump host. Because exploitation requires no credentials, there is no authentication-based workaround that closes the hole; monitoring for unexpected HTTP upload/POST requests to the printer and for anomalous outbound connections or unexpected file changes on the device can serve as a detective control, but these are detection measures, not mitigations, and do not reduce the underlying CVSS 9.8 risk.
Affected VersionsENISA
Affects your stack
Find out whether the stacks and servers you run are on an affected version.
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The Honeywell PD45 is an industrial label/thermal printer whose firmware exposes an embedded HTTP web management interface used for configuration, status monitoring, and firmware or file maintenance. The flaw is classified as CWE-306 (Missing Authentication for Critical Function): the file-upload handler in that web interface accepts and stores attacker-supplied files without verifying any credential, session, or authorization context. Because uploaded content is subsequently processed or executed by the device, the missing check converts a routine file-upload endpoint into a full remote code execution primitive. The published CPE, cpe:2.3:a:honeywell:pd45_industrial_printer:*:*:*:*:*:*:*:*, uses a wildcard version, indicating the vendor advisory is scoped to the affected firmware line rather than a single build; the description pins the vulnerable release at firmware F10.19.010040 and the remediating release at F10.22.030745. The CVSS vector confirms the attack is network-delivered, low complexity, requires no privileges (PR:N) and no user interaction (UI:N), with high confidentiality, integrity, and availability impact - typical of a device that can be fully repurposed or bricked once code execution is achieved.
Know when Honeywell gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Unauthenticated (PR:N, CWE-306) network file upload leading to code execution with low complexity and no user interaction yields full C/I/A compromise of the device.
Primary rating from Vendor (Honeywell).
CVSS VectorVendor: Honeywell
DescriptionCVE.org
An unauthenticated Remote Code Execution via Arbitrary File Upload vulnerability in the web management interface in Honeywell PD45 Industrial Printer version F10.19.010040, allows upload of attacker controlled files without requiring authentication.
An attacker could potentially exploit this vulnerability, leading to the execution of malicious files and commands. Honeywell also recommends updating to the most recent firmware version, Honeywell PD45 Industrial Printer firmware F10.22.030745, which includes a fix for this vulnerability.
Executive ViewAI
Honeywell PD45 industrial label printers running firmware F10.19.010040 can be taken over completely by anyone who can reach them on the network, without needing a password or any user action - an attacker could run their own code on the device. Because these printers sit on warehouse and manufacturing networks and drive labeling and shipping workflows, a compromise could halt or corrupt production and logistics operations and serve as a stepping stone deeper into the plant network. Leadership should care because the affected devices are unauthenticated, internet-exposed only in the sense of internal reachability, and the vendor has published corrected firmware that is not yet widely deployed.
Apply vendor patch. Additionally, until firmware F10.22.030745 is deployed on all affected units, restrict network reachability of the web management interface to authorized administrative hosts only, segment printers onto a dedicated operational-technology VLAN with no lateral routing to corporate or control networks, disable unused remote management features, and enable logging and alerting on access to the printer management interface.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Authentication bypass attacks exploit flaws in the verification mechanisms that control access to systems and applications.
Malicious file upload attacks exploit insufficient validation when web applications accept user-provided files.
Remote Code Execution represents the critical moment when an attacker successfully runs arbitrary code on a target system without physical access.
An ActiveX control in HscRemoteDeploy.dll in Honeywell Enterprise Buildings Integrator (EBI) R310, R400.2, R410.1, and R
Directory traversal vulnerability in the FTP server on Honeywell Excel Web XL1000C50 52 I/O, XL1000C100 104 I/O, XL1000C
Improper Input Validation vulnerability in Honeywell PM43 on 32 bit, ARM (Printer web page modules) allows Command Injec
Honeywell NVR devices allow remote attackers to create a user account in the admin group by leveraging access to a guest
Honeywell Intermec PM23, PM42, PM43, PC23, PC43, PD43, and PC42 industrial printers before 10.11.013310 and 10.12.x befo
Multiple stack-based buffer overflows in (1) HWOPOSScale.ocx and (2) HWOPOSSCANNER.ocx in Honeywell OPOS Suite before 1.
A cross-site scripting (XSS) vulnerability in the component /test/ of iq3xcite v2.31 to v3.05 allows attackers to execut
Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Honeywell MB
Unauthenticated access to Honeywell IQ4x building controller HMI. CVSS 10.0.
An issue was discovered in Honeywell XL Web II controller XL1000C500 XLWebExe-2-01-00 and prior, and XLWeb 500 XLWebExe-
An issue was discovered in Honeywell XL Web II controller XL1000C500 XLWebExe-2-01-00 and prior, and XLWeb 500 XLWebExe-
Controller may be loaded with malicious firmware which could enable remote code execution. Rated critical severity (CVSS
EUVD-2026-86350
GHSA-hf7g-jr9v-jpc5
NVD
CVE.org
EPSS
Vulnrichment
VulDB
Exploit-DB