Skip to main content

Tripp Lite PADM EUVDEUVD-2026-51076

| CVE-2026-22621 HIGH
OS Command Injection (CWE-78)
2026-07-30 Eaton GHSA-pwxm-3jqh-j7gq
8.3
CVSS 3.1 · Vendor: Eaton
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Authenticate to PADM management interface
  2. Delivery
    Access session-management interface
  3. Exploit
    Inject shell metacharacters into input field
  4. Execution
    Escape restricted command environment
  5. Impact
    Execute arbitrary OS commands on device

Vulnerability Assessment

Weakness
CWE
OWASP Top 10:2025
A05:2025 - Injection
ASVS 5.0
V1 - Encoding and Sanitization OS command sanitization, avoid shell exec
MITRE ATT&CK

2 techniques across 1 tactic: Execution

The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up.

Exploitation Conditions

Exploitation requires a valid authenticated administrator session to the PADM device's session-management interface - the CVSS vector's PR:L (and the description's 'authenticated administrator' wording) confirm privileged access is mandatory, which is the dominant limiting factor. The specific attack surface is the session management interface, where improper input validation permits shell command injection to escape the intended restricted command environment. No user interaction is needed (UI:N) and the interface is network-reachable (AV:N), but exploitation is bounded to actors already holding admin credentials, and only affects PADM firmware versions 0 through 20 (an end-of-life line); note the possible PR:L-versus-administrator discrepancy that should be confirmed with the vendor.

Impact

The published CVSS 3.1 vector (AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:L, 8.3) indicates network-reachable, low-complexity exploitation with high confidentiality and integrity impact but only partial availability impact - consistent with a 'restricted environment' escape. However, note a tension between the vector and the description: the vector uses PR:L (low privilege) while the description explicitly requires an 'authenticated administrator,' which is more consistent with PR:H - verify the intended privilege level with Eaton, as it materially lowers real-world risk. No EPSS score, no KEV listing, and no POC were provided, so there is no evidence of active or automated exploitation; this reads as an administrator-privileged, targeted-risk issue rather than a mass-exploitable internet threat. The most significant aggravating factor is that the firmware is end-of-life, so the vulnerability will persist on any device still in production.

Exploit ScenarioDerived

An attacker who has obtained or been granted administrator credentials to a Tripp Lite PADM management interface logs in over the network and submits crafted input to the session-management interface, embedding shell metacharacters that the interface fails to validate. The injected payload breaks out of the restricted command environment and executes arbitrary OS commands on the device, letting the attacker read configuration/secrets and alter device behavior. No public POC is available at time of analysis, but the low attack complexity means a valid admin session is the main barrier.

Monitor Track and reassess. Why: Vendor states no customer action required.
No patch listed yet 0.6% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Jul 30, 2026

Command injection in Eaton's Tripp Lite Series PADM firmware (versions 0 through 20) lets an authenticated administrator run arbitrary operating-system commands through a session-management interface that fails to properly validate input, escaping the intended restricted command environment. The flaw carries CVSS 8.3 (CWE-78) and is notable because the affected firmware line is end-of-life, meaning no security updates are being produced. There is no public exploit identified at time of analysis and the CVE is not listed in CISA KEV, so exploitation currently requires an actor who already holds administrative credentials on the device.

RemediationAI

No vendor-released patch version was identified at time of analysis, and Eaton's own documentation marks the PADM 20 firmware line as end-of-life, so the primary remediation is device/firmware migration: replace affected Tripp Lite PADM units with a currently supported Eaton management card or product line per the EOL notice (https://www.eaton.com/content/dam/eaton/products/backup-power-ups-surge-it-power-distribution/eol/secure/eaton-tripp-lite-series-padm-20-eol-notice.pdf) and follow guidance in the security advisory (https://www.eaton.com/content/dam/eaton/company/news-insights/cybersecurity/security-bulletins/eaton-vulnerability-advisory.pdf). Because exploitation requires administrative authentication over the network, the most effective compensating controls are to isolate the management interface on a dedicated management VLAN or OT segment, restrict its reachability with firewall/ACL rules so only trusted management hosts can reach the session-management interface (trade-off: legitimate remote admins must connect via the jump host/VPN), and rotate/harden administrator credentials and disable unused admin accounts to shrink the set of actors who can trigger the flaw. Monitor the interface for anomalous command activity, accepting that on EOL firmware these controls reduce but do not eliminate exposure.

Affected VersionsENISA

PADM 0 ≤20

Affected Packages

euvd padm no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

PADM is the firmware powering Tripp Lite's network management/PDU-and-UPS management interface (CPE cpe:2.3:a:eaton:padm), used to remotely monitor and control power distribution equipment. The root cause is CWE-78 (OS Command Injection): the session-management interface concatenates attacker-influenced input into a command executed by the underlying OS shell without sufficient sanitization, allowing shell metacharacters or command fragments to break out of the intended restricted CLI/menu. Because the interface is reachable over the network and the device runs an embedded Linux-style OS, a successful injection yields command execution in the device's operating context rather than the confined management shell.

Know when Padm gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (Eaton) PRIMARY 8.3 HIGH
AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:L
vuln.today AI 6.7 MEDIUM

Description requires an authenticated administrator, so PR:H rather than the published PR:L; network-reachable low-complexity command injection yields high C/I and partial A within the restricted environment.

3.1 AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:L
4.0 AV:N/AC:L/AT:N/PR:H/UI:N/VC:H/VI:H/VA:L/SC:N/SI:N/SA:N

Primary rating from Vendor (Eaton).

CVSS VectorVendor: Eaton

Attack Vector
Network
Attack Complexity
Low
Privileges Required
Low
User Interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
Low

DescriptionCVE.org

Improper input validation in one of the session management interface of Eaton's Tripp Lite Series PADM firmware could allow an authenticated administrator to execute arbitrary commands within a restricted environment.

Executive ViewAI

Why It Matters

Eaton's Tripp Lite Series PADM firmware (versions 0-20) contains a command injection vulnerability allowing authenticated administrators to execute arbitrary operating system commands on affected devices. With the product line end-of-life and no vendor patches available, organizations face persistent insider threat and credential-compromise risk in facilities managing critical power distribution infrastructure.

Business Impact: High
Compensating Controls

No vendor-released patch identified at time of analysis. Interim mitigations: (1) restrict PADM admin access to a hardened, isolated administrative network with multi-factor authentication; (2) implement comprehensive audit logging with real-time alerting on exploitation indicators; (3) enforce principle of least privilege and credential rotation for all administrative accounts; (4) conduct periodic access reviews to remove unused accounts; (5) accelerate hardware replacement as the primary long-term control.

Threat Intelligence Overview

EPSS Score
0.6%
Top 55% exploitable
Prevalence
Low
niche power-distribution management firmware, end-of-life, limited enterprise/OT footprint
Social Media
1
Sightings
Data Quality
7 sources
Confidence: High

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity HIGH
CISA KEV No
Public POC No
EPSS 0.6%
Patch available No
Active threat No
Deciding rule
Vendor states no customer action required
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision
Scheduled
Exploitation
None
System Exposure· derived
Open
Automatable
No
Human Impact
High
Technical Impact
Total

Priority Score

43
Low Medium High Critical
KEV: 0
EPSS: +1
CVSS: +42
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

OS command injection occurs when an application passes unsanitized user input directly into system shell commands.

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy