Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessAuthenticate with low-privilege account
-
DeliverySend request abusing improper authentication
-
ExploitBypass privilege boundary (scope change)
-
ExecutionGain elevated privileges
-
ImpactAccess/alter APIs, secrets and config
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A07:2025 - Authentication Failures
ASVS 5.0
V6 - Authentication Authentication mechanism validation
MITRE ATT&CK
2 techniques across 2 tactics: Defense Evasion, Initial Access The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Exploitation requires an existing authenticated session on the target IBM API Connect instance: the CVSS vector specifies PR:L, so the attacker must already hold valid low-privilege credentials rather than being fully unauthenticated. No user interaction is required (UI:N) and the attack is network-reachable with low complexity (AV:N/AC:L). Affected deployments are limited to IBM API Connect versions 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2; the description names no additional feature toggle or non-default configuration as a prerequisite. The primary limiting factor is therefore the need for prior authenticated access, which narrows exploitation to insiders or attackers who have already obtained a foothold credential. |
| Impact | Multiple signals converge on genuine high priority. The CVSS 3.1 vector (AV:N/AC:L/PR:L/UI:N/S:C) describes a network-reachable, low-complexity flaw that needs only low-level authentication and no user interaction, and the scope-change (S:C) with full C:H/I:H/A:H impact drives the 9.9 base score - consistent with a privilege-escalation/improper-authentication bug (CWE-287) where an already-authenticated low-privilege user crosses a trust boundary to gain elevated privileges. The vuln.today decision label is act_now, and the vendor (IBM, who also reported it) has published patches, which strengthens confidence that the issue is real and remediable. Countervailing context: there is no CISA KEV listing and no public exploit or PoC reference in the supplied data, so this is not confirmed active exploitation - the urgency rests on the severity and act_now decision rather than on observed in-the-wild use. No EPSS score was provided, so probabilistic exploitation likelihood cannot be weighed here; its absence is a data gap, not evidence of low risk. Net: treat as a high-priority patch given act_now, the low attack complexity and the PR:L authentication bar, while noting that widespread exploitation is not yet demonstrated. |
| Exploit ScenarioDerived | A remote attacker who already holds a low-privileged account on an affected IBM API Connect instance (10.0.8.0-10.0.8.12 or 12.1.0.0-12.1.1.2) abuses the improper-authentication flaw to elevate to higher privileges without any user interaction. From that elevated position the attacker could access or alter API configurations, secrets, and managed API traffic across the scope boundary. No public exploit code or PoC was identified in the available data, so exploitation details beyond the CVSS characteristics are not described in the sources. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Nov 07, 2026
Privilege escalation in IBM API Connect 10.0.8.x and 12.1.x allows a remote authenticated attacker holding low-privilege credentials to gain elevated privileges through improper authentication, with CVSS 9.9 and a scope change indicating impact beyond the vulnerable component. Affected releases are 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2; no user interaction is required, and the primary barrier is prior authenticated access. Patch information is available from IBM, no public exploit identified at time of analysis, and the vuln.today decision is act_now.
RemediationAI
IBM provides patch information at https://www.ibm.com/support/pages/node/7295635 and https://www.ibm.com/support/pages/node/7295637; apply the vendor fixed release for affected 10.0.8.x and 12.1.x deployments. The supplied data does not list exact fixed version numbers, so confirm the correct target release in the IBM advisory before upgrading. No workaround is described in the available sources.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
CWE-287 (Improper Authentication) identifies a failure in authentication enforcement that lets an authenticated low-privilege user be treated as more privileged. The issue affects IBM API Connect, an API management and gateway product; the CPE string cpe:2.3:a:ibm:api_connect:*:*:*:*:*:*:*:* identifies the product broadly, while the affected ranges are 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2. The CVSS vector AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H describes a network-reachable, low-complexity attack by an authenticated low-privilege actor, with high confidentiality, integrity and availability impact and a scope change; the specific request path or authentication mechanism that is mishandled is not described in the available sources.
Know when Api Connect gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H
Network-reachable improper authentication abused by an already-authenticated low-privilege user (PR:L) with no interaction, crossing a privilege/scope boundary (S:C) for full impact.
Primary rating from Vendor (ibm).
CVSS VectorVendor: ibm
DescriptionCVE.org
IBM API Connect 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2 could allow a remote authenticated attacker to gain elevated privileges due to improper authentication.
Executive ViewAI
IBM API Connect, a critical platform for managing and securing APIs, contains a privilege escalation vulnerability (CVE-2026-17158) that allows authenticated low-privilege users to gain elevated access. This puts sensitive API traffic, integration credentials, and backend systems at risk, and could enable attackers to move laterally across the organization's digital ecosystem. Leadership should prioritize remediation because API Connect often serves as a gateway to core business services, and compromise could lead to data breaches or service disruptions.
Apply vendor patch.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Authentication bypass attacks exploit flaws in the verification mechanisms that control access to systems and applications.
More in Api Connect
View allAuthentication bypass in IBM API Connect 10.0.8.0 through 10.0.8.5 and 10.0.11.0 allows remote, unauthenticated attacker
OS command injection in IBM API Connect 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2 lets a remote attacker
Authenticated code injection in IBM API Connect lets a low-privileged remote user execute arbitrary code by supplying a
Authenticated code execution in IBM API Connect 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2 lets a remote l
Remote authenticated code execution affects IBM API Connect 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2: a
Remote authenticated attackers can execute arbitrary code on IBM API Connect 10.0.8.0 through 10.0.8.12 and 12.1.0.0 thr
Authenticated remote code execution in IBM API Connect 10.0.8.x (10.0.8.0-10.0.8.12) and 12.1.x (12.1.0.0-12.1.1.2) lets
Arbitrary file write via path traversal in IBM API Connect 12.1.0.0 through 12.1.1.2 allows a remote authenticated attac
LDAP injection in IBM API Connect (10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2) lets a remote attacker who
SQL injection in IBM API Connect versions 12.1.0.0 through 12.1.1.2 allows a remote, low-privileged authenticated user t
SQL injection in IBM API Connect 12.1.0.0 through 12.1.1.2 allows an authenticated, low-privilege user to execute arbitr
IBM API Connect 12.1.0.0 through 12.1.1.2 let a remote, authenticated user with only low privileges read sensitive infor
EUVD-2026-118648
GHSA-pxr5-6vcf-h36w
NVD
CVE.org
EPSS
Exploit-DB