Skip to main content

HPE Networking EUVDEUVD-2026-108407

| CVE-2026-95713 HIGH
Buffer Overflow (CWE-119)
2026-10-22 security-alert@hpe.com GHSA-crvf-mq9h-4gf3
7.0
CVSS 3.1 · Vendor: hpe
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Reach product over network
  2. Delivery
    Send crafted request to service
  3. Exploit
    Win AC:H trigger condition
  4. Execution
    Degrade or crash affected component
  5. Impact
    Cause availability loss

Vulnerability Assessment

Weakness
CWE
ASVS 5.0
V15 - Secure Coding and Architecture Bounds checking, buffer size validation
MITRE ATT&CK

2 techniques across 2 tactics: Execution, Privilege Escalation

The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up.

Exploitation Conditions

No CVE description was provided, so the concrete prerequisites (affected feature, protocol, or configuration) cannot be extracted and the exact trigger is not described in the available sources. From the CVSS vector alone: exploitation is network-based and requires no authentication (PR:N) and no user interaction (UI:N), but carries high attack complexity (AC:H), meaning success depends on conditions the attacker cannot fully control (e.g., timing, specific state, or environmental factors) - this AC:H requirement is the primary limiting factor reducing realistic exploitability. The specific affected HPE networking product, versions, and any required deployment mode must be confirmed from HPE bulletin hpesbnw05162en_us.

Impact

The supplied CVSS 3.1 vector (AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H) scores 7.0 (High) and indicates a network-reachable, unauthenticated flaw requiring no user interaction but with high attack complexity (AC:H), meaning the attacker must win conditions outside their direct control. The dominant impact is availability (A:H) with only low confidentiality and low integrity impact, which sits in tension with the single 'Information Disclosure' tag - a true information-disclosure bug would normally be confidentiality-weighted, so the categorization and the impact metrics disagree and should be reconciled against the HPE advisory. There is no EPSS score, no CISA KEV listing, and no PoC or exploit reference in the input, so there is no public exploit identified at time of analysis and no signal of active or probable near-term exploitation. The vuln.today decision label is 'this_week', indicating a prioritized-but-not-emergency posture; combined with AC:H and the absence of exploitation signals, this is a genuine patch-this-cycle item rather than a drop-everything emergency, but note that no description was provided so the mechanism and true impact cannot be independently confirmed.

Exploit ScenarioDerived

A remote, unauthenticated attacker with network reachability to the affected HPE networking product sends crafted traffic that, under specific non-guaranteed conditions (reflected in the high attack complexity), disrupts the service and causes a denial-of-service-level availability loss with incidental low confidentiality/integrity effects. No proof-of-concept or exploit code is referenced in the available sources, and the exact trigger is not described in the available data.

This Week Schedule remediation this week. Why: HIGH severity (CVSS 7.0-8.9).
No patch listed yet 0.2% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 22, 2026

HPE Networking products are affected by a network-reachable, unauthenticated flaw scored 7.0 (High) under CVSS 3.1, with low confidentiality and integrity impact and high availability impact. High attack complexity means exploitation depends on conditions outside the attacker's direct control, and the supplied sources do not describe the trigger, affected feature, or exact product versions. No public exploit or CISA KEV entry is identified at time of analysis; HPE bulletin hpesbnw05162en_us is the authoritative reference for affected scope and fixes.

RemediationAI

No vendor-released patch version is identified in the supplied data. Consult HPE bulletin hpesbnw05162en_us for the fixed firmware or software release, affected product list, and any vendor-prescribed workaround, because the affected interface and deployment mode are not described in the available sources. No specific compensating control can be safely prescribed from the supplied data; if the bulletin identifies one, apply it exactly as instructed. The complete remediation is to update to the version named in the bulletin once confirmed, and until then treat network exposure to the affected HPE product as unmitigated except for controls the vendor explicitly documents.

Affected VersionsENISA

Unknown product 8.12.0.0 ≤8.13.3.0
Unknown product 8.10.0.0 ≤8.10.0.23

Affected Packages

euvd unknown_product no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

The available intelligence does not name the affected subsystem, protocol, or deployment mode, and no CWE is assigned, so the root-cause class cannot be determined. The CVSS 3.1 vector (AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H) describes a network-vector, unauthenticated issue requiring no user interaction, with high attack complexity and unchanged scope; the high complexity is the main limiting factor, but the sources do not state what specific conditions make exploitation difficult. The Information Disclosure tag is consistent with the low confidentiality metric, while the vector also records low integrity impact and high availability impact. No CPE strings were supplied, so affected product identification depends on the HPE advisory.

Know when the next one hits your stack

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (hpe) PRIMARY 7.0 HIGH
AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H
vuln.today AI 7.0 HIGH

No description is available, so metrics mirror the vendor-supplied HPE vector: network, unauthenticated, high complexity, availability-dominant impact; independent adjustment is not possible without the trigger details.

3.1 AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H
4.0 AV:N/AC:H/AT:N/PR:N/UI:N/VC:L/VI:L/VA:H/SC:N/SI:N/SA:N

Primary rating from Vendor (hpe).

CVSS VectorVendor: hpe

Attack Vector
Network
Attack Complexity
High
Privileges Required
None
User Interaction
None
Scope
Unchanged
Confidentiality
Low
Integrity
Low
Availability
High

DescriptionCVE.org

No description provided

Executive ViewAI

Why It Matters

HPE Networking products contain a high-severity vulnerability (CVE-2026-95713) that could allow remote attackers to disrupt network availability, potentially impacting business operations reliant on HPE networking infrastructure. While no active exploitation has been confirmed, the lack of a vendor patch and the potential for service disruption warrant proactive mitigation. Leadership should prioritize understanding exposure and implementing interim controls to safeguard critical network services.

Business Impact: High
Compensating Controls

No vendor-released patch identified at time of analysis. Interim mitigations include restricting network access to affected devices, monitoring for unusual activity, and applying any workarounds specified in HPE bulletin hpesbnw05162en_us.

Threat Intelligence Overview

EPSS Score
0.2%
Top 93% exploitable
Prevalence
Medium
HPE networking security bulletin; enterprise network appliance, not ubiquitous
Social Media
1
Sightings
Data Quality
6 sources
Confidence: High

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity HIGH
CISA KEV No
Public POC No
EPSS 0.2%
Patch available No
Active threat No
Deciding rule
HIGH severity (CVSS 7.0-8.9)
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision
Scheduled
Exploitation
None
System Exposure· derived
Open
Automatable
No
Human Impact
High
Technical Impact
Partial

Priority Score

35
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +35
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

A buffer overflow occurs when a program writes more data to a memory buffer than it was allocated to hold, causing the excess data to spill into adjacent memory regions.

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy