Skip to main content

HPE Networking EUVDEUVD-2026-108403

| CVE-2026-95709 HIGH
Command Injection (CWE-77)
2026-10-22 security-alert@hpe.com GHSA-v48g-5qqp-6vvq
7.2
CVSS 3.1 · Vendor: hpe
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Obtain high-privileged account access
  2. Exploit
    Send crafted request over network
  3. Execution
    Trigger undisclosed flaw
  4. Impact
    Compromise confidentiality, integrity and availability

Vulnerability Assessment

Weakness
CWE
OWASP Top 10:2025
A05:2025 - Injection
ASVS 5.0
V1 - Encoding and Sanitization Command injection prevention
MITRE ATT&CK

1 technique across 1 tactic: Execution

The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up.

Exploitation Conditions

Exploitation requires the attacker to already hold high-level privileges on the affected HPE networking product (CVSS PR:H) - it is not available to unauthenticated or low-privileged network actors. The vector is network-reachable (AV:N) with low complexity (AC:L) and needs no user interaction (UI:N) once that privilege is held. The specific product feature, protocol, or configuration that triggers the flaw is not described in the available sources, as no CVE description was provided; refer to HPE bulletin hpesbnw05162en_us for the affected feature and versions. The principal limiting factor is the PR:H authentication requirement, which confines realistic abuse to insiders or holders of compromised privileged credentials.

Impact

The CVSS 3.1 base score of 7.2 (High) reflects a network-reachable flaw (AV:N) with low attack complexity (AC:L), no user interaction (UI:N), and full confidentiality, integrity, and availability impact (C:H/I:H/A:H) - but critically gated by PR:H, meaning the attacker must already hold high-level privileges on the target. This single factor downgrades real-world urgency considerably: the vulnerability is not remotely exploitable by an anonymous attacker. The vuln.today decision label is 'this_week', indicating a prioritized-but-not-emergency posture, which aligns with the absence of exploitation signals: there is no EPSS score, no CISA KEV listing, and no PoC or exploit reference in the provided data. No SSVC decision metrics (automatable, technical impact) were supplied. A conflict worth flagging: the only tag is 'Information Disclosure', yet the CVSS vector asserts I:H and A:H as well - the metadata and the scored impact disagree, so the vulnerability is likely more than pure disclosure, or the tag is incomplete. No description was provided, so the trigger mechanism is not described in the available sources. Net assessment: a genuine high-severity issue for environments where a privileged-but-lower-trust actor could abuse it (e.g., insider or a compromised privileged account), but not a mass-exploitation emergency given the PR:H barrier and the complete absence of exploitation telemetry.

Exploit ScenarioDerived

An attacker who already possesses high-level privileged access to the affected HPE networking product sends crafted input over the network to trigger the flaw, gaining full read/write control and the ability to disrupt the system. Because the exact feature and trigger are not described in the available sources, the specific vector cannot be detailed. No public exploit or PoC reference is present in the supplied data.

This Week Schedule remediation this week. Why: HIGH severity (CVSS 7.0-8.9).
No patch listed yet 0.4% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 22, 2026

High-severity network-reachable flaw in HPE networking products can let attackers who already hold high-level privileges affect confidentiality, integrity, and availability. The exact affected models, firmware versions, and triggering feature are not described in the available sources; HPE bulletin hpesbnw05162en_us is the authoritative reference. No public exploit identified at time of analysis.

RemediationAI

No vendor-released patch identified at time of analysis; the provided data contains no fixed version, so consult HPE bulletin hpesbnw05162en_us for the fixed firmware or software release and upgrade instructions. Until the fixed release is confirmed, restrict network access to the affected product's administrative and management interfaces to trusted networks or jump hosts, which lowers exposure but can complicate remote administration; enforce least privilege and rotate privileged credentials, which reduces insider or compromised-account abuse but does not remediate the flaw; and monitor privileged sessions and configuration changes for anomalous activity, which may generate noise and requires tuning. Because the vulnerable feature and trigger are not described in the available sources, coordinate with HPE support before disabling any product feature.

Affected VersionsENISA

Unknown product 10.8.0.0 ≤10.8.1.1
Unknown product 10.3.0.0 ≤10.4.1.13
Unknown product 10.6.0.0 ≤10.7.2.6

Affected Packages

euvd unknown_product no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

The available data does not identify the underlying component, protocol, or library, and the root-cause class is not specified (CWE N/A). The CVSS:3.1 vector AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H describes a network-reachable, low-complexity issue that requires high privileges and no user interaction, with high impact across confidentiality, integrity, and availability. The sole tag is Information Disclosure, while the assessed vector indicates broader confidentiality, integrity, and availability impact; the provided sources do not explain that discrepancy. No CPE data was supplied, so exact product models and firmware branches cannot be mapped from the available intelligence.

Know when Hpe gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (hpe) PRIMARY 7.2 HIGH
AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H
vuln.today AI 7.2 HIGH

Adopts the supplied vector: network-reachable and no user interaction, but PR:H because the input indicates a high-privilege requirement; full CIA impact with no scope change.

3.1 AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H
4.0 AV:N/AC:L/AT:N/PR:H/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N

Primary rating from Vendor (hpe).

CVSS VectorVendor: hpe

Attack Vector
Network
Attack Complexity
Low
Privileges Required
High
User Interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

DescriptionCVE.org

No description provided

Executive ViewAI

Why It Matters

A high-severity network-reachable vulnerability in HPE networking products allows attackers with existing high-level privileges to compromise confidentiality, integrity, and availability. Affected organizations are those using the unspecified HPE networking gear referenced in bulletin hpesbnw05162en_us, and all three pillars of information security are at risk. While exploitation requires prior privileged access and no public exploitation has been observed, the impact on network infrastructure could disrupt business operations, making this a medium concern for leadership.

Business Impact: Medium
Compensating Controls

No vendor-released patch identified at time of analysis. Interim mitigations include restricting administrative access to HPE networking devices, applying network segmentation to isolate affected devices from critical systems, enforcing least privilege and multi-factor authentication for privileged accounts, and monitoring for suspicious activity on network infrastructure.

Threat Intelligence Overview

EPSS Score
0.4%
Top 71% exploitable
Prevalence
Medium
HPE enterprise networking appliance; common in enterprises but not ubiquitous
Social Media
1
Sightings
Data Quality
6 sources
Confidence: High

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity HIGH
CISA KEV No
Public POC No
EPSS 0.4%
Patch available No
Active threat No
Deciding rule
HIGH severity (CVSS 7.0-8.9)
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision
Scheduled
Exploitation
None
System Exposure· derived
Open
Automatable
No
Human Impact
Medium
Technical Impact
Total

Priority Score

36
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +36
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

OS command injection occurs when an application passes unsanitized user input directly into system shell commands.

More in Hpe

View all
CVE-2017-5689 CRITICAL POC
9.8 May 02

An unprivileged network attacker could gain system privileges to provisioned Intel manageability SKUs: Intel Active Mana

CVE-2016-7434 HIGH POC
7.5 Jan 13

The read_mru_list function in NTP before 4.2.8p9 allows remote attackers to cause a denial of service (crash) via a craf

CVE-2026-76708 CRITICAL POC
9.8 Sep 22

Default, hard-coded credentials shipped on several administrative and system accounts in HPE's Analytics and Location En

CVE-2024-53676 CRITICAL POC
9.8 Nov 27

A directory traversal vulnerability in Hewlett Packard Enterprise Insight Remote Support may allow remote code execution

CVE-2022-37932 CRITICAL POC
9.8 Dec 12

A potential security vulnerability has been identified in Hewlett Packard Enterprise OfficeConnect 1820, 1850, and 1920S

CVE-2020-7136 CRITICAL POC
9.8 Apr 30

A security vulnerability in HPE Smart Update Manager (SUM) prior to version 8.5.6 could allow remote unauthorized access

CVE-2025-37097 HIGH POC
7.5 Jul 01

A vulnerability in HPE Insight Remote Support (IRS) prior to v7.15.0.646 may allow an unauthenticated denial of service

CVE-2019-8936 HIGH POC
7.5 May 15

NTP through 4.2.8p12 has a NULL Pointer Dereference. Rated high severity (CVSS 7.5), this vulnerability is remotely expl

CVE-2026-79849 CRITICAL
10.0 Oct 22

A maximum-severity, network-reachable flaw (CVSS 3.1 base 10.0) in an as-yet-unnamed HPE product allows remote attackers

CVE-2026-79848 CRITICAL
10.0 Oct 22

Unauthenticated network attackers can potentially achieve high confidentiality, integrity, and availability impact again

CVE-2026-79851 CRITICAL
10.0 Oct 22

HPE security bulletin hpesbnw05162en_us documents a maximum-severity (CVSS 10.0) exposure in an HPE product that is not

CVE-2026-79847 CRITICAL
10.0 Oct 22

HPE advisory hpesbnw05162en_us covers a product flaw carrying a CVSS 3.1 base score of 10.0 (AV:N/AC:L/PR:N/UI:N/S:C/C:H

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy