Skip to main content

HPE Networking EUVDEUVD-2026-108364

| CVE-2026-79864 CRITICAL
2026-10-22 security-alert@hpe.com GHSA-vfv2-5wwg-qvqh
9.6
CVSS 3.1 · Vendor: hpe
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Gain adjacent-network foothold
  2. Exploit
    Send crafted traffic to HPE device
  3. Impact
    Compromise device and reach adjacent systems

Vulnerability Assessment

Exploitation Conditions

Exploitation requires the attacker to hold an adjacent-network position (same local/Layer-2 segment or logically adjacent network as the affected HPE networking device), per AV:A - it is NOT reachable from the general internet, which is the primary limiting factor. Per PR:N and UI:N the attack needs no authentication and no user interaction. The specific product feature, protocol, or configuration that triggers the flaw is not described in the available sources (no CVE description, CWE, or retrievable advisory text), so the exact enabling condition cannot be named from the provided input; consult HPE bulletin hpesbnw05162en_us to confirm affected configurations and versions.

Impact

Signals are mixed between high nominal severity and thin corroborating evidence. The supplied CVSS 3.1 base score is 9.6 (Critical) with vector AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H, meaning adjacent-network reach, low complexity, no privileges, no user interaction, a scope change, and full confidentiality/integrity/availability impact - a genuinely severe profile IF accurate. The vuln.today decision label is act_now, which argues for urgent remediation. However, several key risk signals are absent from the input: there is no EPSS exploitation-probability score, no CISA KEV listing, and no PoC or exploit reference - only a single HPE security bulletin link. There is also NO description or CWE, so the mechanism is unverified. Note two tensions: (1) the Tag says 'Information Disclosure' yet the CVSS vector asserts I:H and A:H (integrity and availability impact), so the flaw is broader than pure disclosure if the vector is correct - verify with the HPE advisory. (2) The attack vector is AV:A (adjacent), not AV:N (network), so exploitation is NOT internet-wide - an attacker must already hold a position on the same local/adjacent network segment, which meaningfully constrains real-world reach despite the Critical score. Treat this as a high-priority patch consistent with the act_now label, but recognize that the absence of EPSS/KEV/PoC data means active or widespread exploitation is not demonstrated by the available input.

Exploit ScenarioDerived

An attacker already positioned on the same adjacent/local network segment as the affected HPE networking device sends crafted traffic to it, and - with no authentication and no user interaction required - triggers the flaw, gaining high confidentiality, integrity, and availability impact; the CVSS scope change (S:C) indicates the impact can extend beyond the vulnerable component to other systems. No PoC or exploit reference is present in the input, and the exact trigger is not described in the available sources.

Act Now Prioritize within 24-48h. Why: CRITICAL severity.
No patch listed yet 0.2% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 22, 2026

HPE networking devices are exposed to a critical-severity (CVSS 9.6) adjacent-network flaw that requires no authentication and no user interaction. The bulletin is tagged Information Disclosure, while the assessed vector indicates high confidentiality, integrity, and availability impact with a scope change; the exact triggering feature or protocol is not described in the available sources. No public exploit identified at time of analysis, and the vuln.today decision label is act_now pending review of HPE bulletin hpesbnw05162en_us.

RemediationAI

No vendor-released patch version or fixed release is identified in the provided input. Consult HPE bulletin hpesbnw05162en_us (https://support.hpe.com/hpesc/public/docDisplay?docId=hpesbnw05162en_us&docLocale=en_US) for the vendor's fixed firmware/software versions and affected product matrix. No workaround is stated in the provided sources; because the assessed vector requires an adjacent-network position (AV:A), limiting affected devices' exposure to untrusted Layer-2/adjacent segments is the only risk-reduction step supported by the supplied data, with the trade-off that it can complicate network segmentation and does not protect against a host that is already adjacent.

Affected VersionsENISA

Unknown product 10.6.0.0 ≤10.7.2.6
Unknown product 10.3.0.0 ≤10.4.1.13
Unknown product 10.8.0.0 ≤10.8.1.1

Affected Packages

euvd unknown_product no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

The provided data contains no CVE description, no CWE, no CPE strings, and no retrievable advisory text, so the vulnerable component and root-cause class cannot be named from the input. The assessed CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H vector shows that the attacker must hold an adjacent-network position (same local/Layer-2 segment or logically adjacent network), that no authentication or user interaction is required, and that a scope change is assessed alongside high confidentiality, integrity, and availability impact. AV:A is the primary limiting factor: the flaw is not characterized as reachable from the general internet. The HPE bulletin hpesbnw05162en_us is the only source that can confirm affected configurations, protocol/feature exposure, and the scope boundary implied by S:C.

Know when the next one hits your stack

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (hpe) PRIMARY 9.6 CRITICAL
AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H
vuln.today AI 9.6 CRITICAL

No description is available to revise the supplied metrics, so the adjacent-access, unauthenticated, scope-changed, full-triad-impact vector is retained as provided.

3.1 AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H
4.0 AV:A/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:H/SI:H/SA:H

Primary rating from Vendor (hpe).

CVSS VectorVendor: hpe

Attack Vector
Adjacent
Attack Complexity
Low
Privileges Required
None
User Interaction
None
Scope
Changed
Confidentiality
High
Integrity
High
Availability
High

DescriptionCVE.org

No description provided

Executive ViewAI

Why It Matters

A critical vulnerability (CVE-2026-79864) in HPE networking devices allows unauthenticated attackers on an adjacent network to potentially compromise confidentiality, integrity, and availability. This affects all organizations relying on HPE networking equipment for their infrastructure, and leadership should prioritize immediate mitigation due to the lack of a vendor patch and the potential for significant operational disruption.

Business Impact: High
Compensating Controls

No vendor-released patch identified at time of analysis. Interim mitigations include network segmentation to isolate affected devices, restricting access to trusted networks only, and monitoring for suspicious activity.

Threat Intelligence Overview

EPSS Score
0.2%
Top 89% exploitable
Prevalence
Medium
HPE networking product per advisory; exact affected product unidentified from input
Data Quality
5 sources
Confidence: Medium

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity CRITICAL
CISA KEV No
Public POC No
EPSS 0.2%
Patch available No
Active threat No
Deciding rule
CRITICAL severity
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision· derived
Scheduled
Exploitation· derived
None
System Exposure· derived
Controlled
Automatable· derived
No
Human Impact
High

Priority Score

48
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +48
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy