Skip to main content

Qt QNetworkAccessManager CVE-2026-95620

| EUVDEUVD-2026-108708 LOW
Use After Free (CWE-416)
2026-10-23 Qt GHSA-qcfg-4m2w-6vm7
2.1
CVSS 4.0 · Vendor: Qt
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Lure client to malicious HTTP/2 server
  2. Exploit
    Send crafted HTTP/2 response frames
  3. Execution
    Trigger use-after-free in Qt client
  4. Impact
    Crash application (denial of service)

Vulnerability Assessment

Weakness
CWE
ASVS 5.0
V15 - Secure Coding and Architecture Memory lifecycle management
MITRE ATT&CK

2 techniques across 2 tactics: Execution, Privilege Escalation

The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up.

Exploitation Conditions

Exploitation requires the victim's Qt application to use QNetworkAccessManager's HTTP/2 client support and to establish an HTTP/2 connection to a server the attacker controls or has compromised - the server, not the attacker directly, delivers the malicious HTTP/2 traffic. Consistent with CVSS UI:A, active user/application interaction is needed to initiate that outbound connection, and AC:H/AT:P indicate further conditions outside the attacker's control must be met, so this cannot be triggered against a passive or default client without an outbound HTTP/2 session to a hostile endpoint. Limiting factors: no authentication is bypassed and no server-side exposure exists (this is a client-side flaw); impact is restricted to a crash of the client process with no code execution, data disclosure, or integrity impact described in the available sources. The precise memory-management trigger within the HTTP/2 client is not described in the available sources.

Impact

All signals converge on LOW real-world priority. The supplied CVSS 4.0 vector (AV:N/AC:H/AT:P/PR:N/UI:A/VC:N/VI:N/VA:H) yields a base score of only 2.1, and the impact is confined to availability (VA:H) with no confidentiality or integrity effect - consistent with the description, which states the flaw merely crashes the client application. Exploitation maturity is E:U (unproven) and the vuln.today decision label is 'monitor', not act_now or emergency. This is NOT in CISA KEV (no active exploitation), no EPSS score was provided, and the only references are a vendor advisory and a Gerrit patch - there is no PoC or exploit reference, so no public exploit is identified. The combination AC:H + AT:P + UI:A means the attacker must induce a victim client to connect to an attacker-controlled or compromised HTTP/2 server AND additional execution conditions outside the attacker's control must hold, which is why the score is low despite the network vector. This is a genuine but low-risk availability bug, not a high-CVSS-but-overrated issue - it is correctly rated low across the board. No conflicting signals were found; the main gap is the absence of EPSS data to quantify exploitation probability.

Exploit ScenarioDerived

A user's Qt-based application initiates an HTTP/2 connection to a server that is attacker-controlled or has been compromised. The malicious server returns crafted HTTP/2 responses that trigger a use-after-free in QNetworkAccessManager's HTTP/2 client code, crashing the client. No public exploit code or PoC reference is provided, and the impact is limited to a denial of service of the client application.

Monitor Track and reassess. Why: LOW severity (CVSS 0.1-3.9).
Patch available 0.4% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 23, 2026

Crash of Qt-based client applications can be triggered by a malicious or compromised HTTP/2 server through a use-after-free flaw in the HTTP/2 client support of the Qt Network module's QNetworkAccessManager. Only applications that actually open an outbound HTTP/2 session to an attacker-controlled or compromised endpoint are exposed - the hostile server delivers the triggering traffic, and the client must initiate that connection - while authentication is not bypassed and no code execution, data disclosure, or integrity impact is described. All signals converge on LOW real-world priority: the vendor rates it CVSS 4.0 at 2.1, the independent assessment scores it CVSS 3.1 at 3.1 (AV:N/AC:H/PR:N/UI:R/A:L), no public exploit code is identified at time of analysis, there is no CISA KEV listing, and the priority decision is monitor.

RemediationAI

Patch availability is confirmed by the vendor: the fix is tracked as Qt Gerrit change 759717 in qtbase (https://codereview.qt-project.org/c/qt/qtbase/+/759717), and the version-specific guidance is documented in the Qt advisory at https://wiki.qt.io/List_of_known_vulnerabilities_in_Qt_products#CVE-2026-95620. Because the fix reference is an upstream code-review change rather than a tagged release, a released patched Qt version is not independently confirmed from the available data, so teams should verify with the advisory which Qt release ships the fix before closing the item. No standalone workaround is documented in the supplied sources; the exposure itself is limited to applications that establish outbound HTTP/2 sessions to untrusted or compromisable servers, so constraining which endpoints a Qt client will speak HTTP/2 to reduces reachable attack surface, at the cost of losing HTTP/2 multiplexing performance for the excluded destinations. Given the LOW priority decision, no KEV listing, low EPSS-style urgency and availability-only impact bounded to a client crash, this can be scheduled with normal patch cadence rather than emergency change control.

Affected VersionsENISA

Qt 6.9.0 <6.11.3

Affected Packages

euvd qt fix: 6.11.3

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

The flaw is a use-after-free (CWE-416) in the HTTP/2 client implementation of the Qt Network module, reached through QNetworkAccessManager - the class Qt applications use for outbound HTTP requests. A use-after-free of this class means memory backing an object is released while still referenced, so continued use corrupts memory and can terminate the process; here the impact is confined to availability (a client-side crash) with no confidentiality or integrity effect. The precise memory-management trigger inside the HTTP/2 client is not described in the available sources, and the supplied CVSS metrics describe severity rather than mechanism: AC:H and AT:P signal conditions outside the attacker's control must align, and UI:A reflects that the application must actively establish the outbound HTTP/2 connection to the hostile endpoint. The CPE cpe:2.3:a:qt:qt:*:*:*:*:*:*:*:* is version-wildcarded, so the advisory rather than the CPE must be used to pin the exact affected Qt releases. This is strictly a client-side library issue - no server-side Qt service exposure is implied.

Know when Qt gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (Qt) PRIMARY 2.1 LOW
CVSS:4.0/AV:N/AC:H/AT:P/PR:N/UI:A/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N/E:U/AU:N/R:U/RE:L/U:Green
vuln.today AI 3.1 LOW

Network-reachable but requires connecting to a hostile HTTP/2 server (UI:R) under non-trivial conditions (AC:H); only a recoverable client crash, so A:L and C:N/I:N.

3.1 AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:L
4.0 AV:N/AC:H/AT:P/PR:N/UI:A/VC:N/VI:N/VA:L/SC:N/SI:N/SA:N

Primary rating from Vendor (Qt).

CVSS VectorVendor: Qt

Attack Vector
Network
Attack Complexity
High
Attack Requirements
Present
Privileges Required
None
User Interaction
Active
Vulnerable system: Confidentiality
None
Vulnerable system: Integrity
None
Vulnerable system: Availability
High
Subsequent system: Confidentiality
None
Subsequent system: Integrity
None
Subsequent system: Availability
None

DescriptionCVE.org

A use-after-free vulnerability in the Qt QNetworkAccessManager HTTP/2 client support of the Qt Network module allows a malicious or compromised HTTP/2 server to cause the client application to crash, affecting availability.

Threat Intelligence Overview

EPSS Score
0.4%
Top 71% exploitable
Prevalence
High
Qt is a widely deployed cross-platform framework across desktop and embedded software
Data Quality
4 sources
Confidence: Medium

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity LOW
CISA KEV No
Public POC No
EPSS 0.4%
Patch available Yes
Active threat No
Deciding rule
LOW severity (CVSS 0.1-3.9)
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision· derived
Scheduled
Exploitation· derived
None
System Exposure· derived
Open
Automatable· derived
No
Human Impact· derived
High

Priority Score

10
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +10
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

Use-after-free vulnerabilities occur when a program continues to access memory through a pointer after that memory has been deallocated.

Memory corruption occurs when a program writes data beyond the boundaries of allocated memory regions or accesses memory in unintended ways, violating the integrity of the process's address space.

Denial of Service attacks render applications or systems unavailable by overwhelming resources or triggering failure conditions.

More in Qt

View all
CVE-2020-12267 CRITICAL POC
9.8 Apr 27

setMarkdown in Qt before 5.14.2 has a use-after-free related to QTextMarkdownImporter::insertBlock. Rated critical sever

CVE-2023-37369 HIGH POC
7.5 Aug 20

In Qt before 5.15.15, 6.x before 6.2.9, and 6.3.x through 6.5.x before 6.5.2, there can be an application crash in QXmlS

CVE-2020-13962 HIGH POC
7.5 Jun 09

Qt 5.12.2 through 5.14.2, as used in unofficial builds of Mumble 1.3.0 and other products, mishandles OpenSSL's error qu

CVE-2020-0570 HIGH POC
7.3 Sep 14

Uncontrolled search path in the QT Library before 5.14.0, 5.12.7 and 5.9.10 may allow an authenticated user to potential

CVE-2023-51714 CRITICAL
9.8 Dec 24

An issue was discovered in the HTTP2 implementation in Qt before 5.15.17, 6.x before 6.2.11, 6.3.x through 6.5.x before

CVE-2024-36048 CRITICAL
9.8 May 18

QAbstractOAuth in Qt Network Authorization in Qt before 5.15.17, 6.x before 6.2.13, 6.3.x through 6.5.x before 6.5.6, an

CVE-2017-10904 CRITICAL
9.8 Dec 16

Qt for Android prior to 5.9.0 allows remote attackers to execute arbitrary OS commands via unspecified vectors. Rated cr

CVE-2018-19873 CRITICAL
9.8 Dec 26

An issue was discovered in Qt before 5.11.3. Rated critical severity (CVSS 9.8), this vulnerability is remotely exploita

CVE-2016-10040 MEDIUM POC
5.5 Mar 07

Stack-based buffer overflow in QXmlSimpleReader in Qt 4.8.5 allows remote attackers to cause a denial of service (applic

CVE-2026-95509 HIGH
8.8 Sep 29

Out-of-bounds read in Qt for MCUs occurs when an application passes a Latin-1-optimized string containing Latin-1 charac

CVE-2018-19870 HIGH
8.8 Dec 26

An issue was discovered in Qt before 5.11.3. Rated high severity (CVSS 8.8), this vulnerability is remotely exploitable,

CVE-2018-15518 HIGH
8.8 Dec 26

QXmlStream in Qt 5.x before 5.11.3 has a double-free or corruption during parsing of a specially crafted illegal XML doc

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy