Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessOperate hostile SMB1 server
-
DeliveryVictim mounts CIFS share
-
ExploitVictim lists directory (getdents64)
-
ExecutionServer returns oversized FileNameLength dirent
-
Persistmemchr reads past slab buffer
-
ImpactKernel memory leak or crash
Vulnerability Assessment
| Exploitation Conditions | Requires the victim to mount a CIFS share from an attacker-controlled server using the legacy SMB1 dialect and then perform a directory listing (getdents64/iterate_dir), reaching the TRANS2_FIND_FIRST/FIND_NEXT dirent-parsing path in cifs_filldir(). The attacker must control the SMB server and return a directory entry with an oversized FileNameLength. Limiting factors: SMB1 is deprecated and disabled/uncommon in many modern deployments; the victim must be induced to mount and browse the hostile share (UI:R); there is no path to trigger this against a listening service without an active CIFS mount to the attacker. |
| Impact | This is a client-side, server-triggered out-of-bounds slab read (KASAN-confirmed CWE-125) in the Linux kernel's SMB/CIFS client. The CVSS 3.1 vector (AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H, base 8.1) is internally consistent with the description: the attacker is a hostile SMB1 server (PR:N - no credentials needed on the attacker side), reachability requires a victim to mount and list the attacker's share (UI:R), and impact is memory disclosure (C:H) plus kernel crash/DoS (A:H) with no integrity effect (I:N). No EPSS score, no CISA KEV listing, and no publicly posted exploit are present in the input - the Artiphishell vTriage reproducer is described as 'available on request,' so it is NOT public POC code. The real-world priority is moderate rather than urgent: it is not a default-configuration remote-unauth flaw, but rather depends on the increasingly deprecated SMB1 dialect and on a user being lured into mounting/listing an attacker-controlled server. The one signal to verify: the vector uses AV:N but the description also notes reachability by 'any user who can list a directory on a CIFS mount,' implying a local trigger path once such a mount exists - the network vector reflects the hostile-server delivery, not remote unauthenticated code execution against an exposed service. |
| Exploit ScenarioDerived | An attacker stands up a malicious SMB1 server and induces a victim to mount it (e.g., a rogue file share, autofs, or a phishing link that triggers a CIFS mount). When the victim runs a directory listing (getdents64), the server returns a directory entry with an oversized FileNameLength; cifs_filldir() trusts that length and memchr() reads past the SMB response slab buffer, leaking adjacent kernel memory or crashing the host. A private userspace reproducer (emulated hostile SMB1 server plus a getdents64 client) reliably triggers the KASAN report, but no public exploit is available. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Sep 25, 2026
An out-of-bounds slab read in the Linux kernel's SMB/CIFS client allows an attacker-controlled SMB1 server to make a victim's kernel read past the end of a kmalloc'd response buffer when that victim lists a directory on a mounted share. cifs_filldir() trusts the server-supplied de.namelen field from a TRANS2_FIND_FIRST/FIND_NEXT response without verifying that the name stays inside the response buffer, so an oversized FileNameLength drives memchr() (via filldir64()/verify_dirent_name()) beyond the allocation and produces a KASAN slab-out-of-bounds report; CVSS 3.1 is 8.1 (AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H), with high confidentiality and availability impact from the out-of-bounds read. Exploitation requires the victim to mount a share from a hostile server using the deprecated SMB1 dialect and then browse it, so user interaction is required; no public exploit identified at time of analysis.
RemediationAI
Vendor-released patch: 6.12.111, 6.18.53, and 7.2 (mainline) - apply the corresponding stable or mainline update; the fixing commits are 6e3b965267b7313903baba2739992b1e2e92d540, 03003506c86f90312b0966283662c42fcab66e4b and f8cf09a53a0dc1da298e9dd0ba5f21710cf119d6 (see https://git.kernel.org/stable/c/6e3b965267b7313903baba2739992b1e2e92d540 and the sibling links). If immediate patching is not possible, the most effective compensating control is to eliminate the vulnerable code path by refusing the legacy SMB1 dialect: mount with an explicit vers=2.0, vers=2.1, or vers=3.0 option, and disable the SMB1/CIFS dialect kernel-wide (for example by setting the relevant modprobe/conf option and remounting), which prevents the TRANS2_FIND_FIRST/FIND_NEXT parsing that reaches cifs_filldir(); the trade-off is loss of connectivity to SMB1-only servers and legacy NAS appliances until they are upgraded. As a secondary control, avoid mounting or browsing shares hosted by untrusted or attacker-influenced servers, since the vulnerability cannot be triggered without an active SMB1 mount to a hostile server and a directory listing performed by a local user (getdents64). There is no practical way to filter the oversized FileNameLength field at the client, so patch or dialect removal - not input filtering - is the reliable fix.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The vulnerable path is in fs/smb/client (cifs_readdir() -> cifs_filldir() -> filldir64() -> verify_dirent_name() -> memchr()). When a CIFS client parses an SMB1 TRANS2_FIND_FIRST / TRANS2_FIND_NEXT reply, each directory entry is described by a structure containing de.name and a server-controlled de.namelen. The SMB response itself lives in a bounded kmalloc'd buffer, but cifs_filldir() never validates that de.name + de.namelen remains within that buffer before the name is handed to filldir64(), which calls verify_dirent_name() and reads namelen bytes with memchr(). A malicious server that advertises an oversized FileNameLength therefore causes the kernel to read past the end of the response slab allocation. This is an out-of-bounds read (CWE-125) reachable through the standard getdents64()/iterate_dir() syscall path, as shown by the reported KASAN trace (slab-out-of-bounds in memchr+0x71/0x80 from filldir64+0x4c/0x6a0 -> cifs_filldir.constprop.0+0x9bb/0x1e00 -> cifs_readdir+0x2101/0x3380 -> iterate_dir+0x19c/0x520 -> __x64_sys_getdents64+0x126/0x210). Because the read is bounded only by whatever bytes follow the slab object, the impact class is information disclosure plus potential availability loss (crash) rather than remote code execution. The upstream fix passes the end-of-response pointer into cifs_filldir() and rejects any entry whose name would extend past that boundary. The affected component is the in-tree Linux SMB/CIFS client identified by CPE cpe:2.3:a:linux:linux; the defect dates back to the start of the tracked git history (1da177e4c3f41524e886b7f1b8a0c1fc7321cac2), so every unpatched kernel with SMB1 client support is in scope.
Know when the next one hits your stack
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H
Hostile SMB1 server needs no client credentials (PR:N) but victim must mount and list the share (UI:R); OOB slab read leaks kernel memory (C:H) and crashes the host (A:H), no integrity impact.
Primary rating from Vendor (Linux).
CVSS VectorVendor: Linux
Lifecycle Timeline
4DescriptionCVE.org
In the Linux kernel, the following vulnerability has been resolved:
smb: client: bound dirent name against end of SMB response in cifs_filldir
cifs_filldir() copies the entry name out of an SMB1 TRANS2_FIND_FIRST / FIND_NEXT response using a length (de.namelen) supplied by the server. The kmalloc'd SMB response buffer is bounded, but nothing checks that de.name + de.namelen still lies inside that buffer before the eventual filldir64() -> verify_dirent_name() -> memchr() reads namelen bytes.
A hostile SMB1 server that returns an oversized FileNameLength in a directory entry therefore causes memchr() to read past the end of the response slab buffer. Reachable from any user who can list a directory on a CIFS mount served by an attacker-controlled server (getdents64() on the mounted directory):
BUG: KASAN: slab-out-of-bounds in memchr+0x71/0x80 Read of size 1 at addr ffff88800e0640cc by task poc/115 Call Trace: dump_stack_lvl+0x64/0x80 print_report+0xce/0x620 kasan_report+0xec/0x120 memchr+0x71/0x80 filldir64+0x4c/0x6a0 cifs_filldir.constprop.0+0x9bb/0x1e00 cifs_readdir+0x2101/0x3380 iterate_dir+0x19c/0x520 __x64_sys_getdents64+0x126/0x210 do_syscall_64+0x107/0x5a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f
Pass the end-of-response pointer down to cifs_filldir() and reject entries whose name would extend past that boundary.
This bug was discovered by Artiphishell's vTriage pipeline, which generated a userspace reproducer (an emulated hostile SMB1 server plus a getdents64() client) that reliably triggers the KASAN report on an unpatched kernel. The fix below was drafted with the Claude coding assistant; a userspace reproducer is available on request.
Executive ViewAI
A memory-handling flaw in the Linux kernel's SMB/CIFS client (CVE-2026-93787, CVSS 8.1) allows a hostile SMB1 file server to make a victim's kernel read beyond an allocated buffer whenever a user lists a directory on a mounted share; per the CVSS vector the attacker needs no credentials (PR:N) but a user must mount and browse the share (UI:R). Exposure is concentrated in environments that still rely on the deprecated SMB1 dialect, where affected endpoints or servers can leak kernel memory and be destabilized or crashed. A vendor patch is available and no public exploit code has been identified at time of analysis, so remediation is achievable within normal patch cycles.
Apply vendor patch.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
A buffer overflow occurs when a program writes more data to a memory buffer than it was allocated to hold, causing the excess data to spill into adjacent memory regions.
Same technique Buffer Overflow
View allVendor StatusVendor
SUSE
Severity: Important| Product | Status |
|---|---|
| SUSE Linux Enterprise Desktop 15 SP7 | Affected |
| SUSE Linux Enterprise Desktop 15 SP7 | Affected |
| SUSE Linux Enterprise High Availability Extension 15 SP7 | Affected |
| SUSE Linux Enterprise High Availability Extension 15 SP7 | Affected |
| SUSE Linux Enterprise High Availability Extension 16.0 | Affected |
| SUSE Linux Enterprise High Availability Extension 16.0 | Affected |
| SUSE Linux Enterprise High Availability Extension 16.1 | Affected |
| SUSE Linux Enterprise High Availability Extension 16.1 | Affected |
| SUSE Linux Enterprise Micro 5.3 | Affected |
| SUSE Linux Enterprise Micro 5.3 | Affected |
| SUSE Linux Enterprise Micro 5.3 | Affected |
| SUSE Linux Enterprise Micro 5.3 | Affected |
| SUSE Linux Enterprise Micro 5.4 | Affected |
| SUSE Linux Enterprise Micro 5.4 | Affected |
| SUSE Linux Enterprise Micro 5.4 | Affected |
| SUSE Linux Enterprise Micro 5.4 | Affected |
| SUSE Linux Enterprise Micro 5.5 | Affected |
| SUSE Linux Enterprise Micro 5.5 | Affected |
| SUSE Linux Enterprise Micro 5.5 | Affected |
| SUSE Linux Enterprise Module for Basesystem 15 SP7 | Affected |
| SUSE Linux Enterprise Module for Basesystem 15 SP7 | Affected |
| SUSE Linux Enterprise Module for Development Tools 15 SP7 | Affected |
| SUSE Linux Enterprise Module for Development Tools 15 SP7 | Affected |
| SUSE Linux Enterprise Real Time 15 SP7 | Affected |
| SUSE Linux Enterprise Server 15 SP7 | Affected |
| SUSE Linux Enterprise Server 15 SP7 | Affected |
| SUSE Linux Enterprise Server 16.0 | Affected |
| SUSE Linux Enterprise Server 16.0 | Affected |
| SUSE Linux Enterprise Server 16.1 | Affected |
| SUSE Linux Enterprise Server 16.1 | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP7 | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP7 | Affected |
| SUSE Linux Enterprise Server for SAP applications 16.0 | Affected |
| SUSE Linux Enterprise Server for SAP applications 16.0 | Affected |
| SUSE Linux Enterprise Server for SAP applications 16.1 | Affected |
| SUSE Linux Enterprise Server for SAP applications 16.1 | Affected |
| SUSE Linux Micro 6.0 | Affected |
| SUSE Linux Micro 6.0 | Affected |
| SUSE Linux Micro 6.0 | Affected |
| SUSE Linux Micro 6.1 | Affected |
| SUSE Linux Micro 6.1 | Affected |
| SUSE Linux Micro 6.1 | Affected |
| SUSE Linux Micro 6.2 | Affected |
| SUSE Linux Micro 6.2 | Affected |
| SUSE Linux Micro Extras 6.0 | Affected |
| SUSE Linux Micro Extras 6.0 | Affected |
| SUSE Linux Micro Extras 6.0 | Affected |
| SUSE Linux Micro Extras 6.1 | Affected |
| SUSE Linux Micro Extras 6.1 | Affected |
| SUSE Real Time Module 15 SP7 | Affected |
| openSUSE Leap 16.0 | Affected |
| SUSE Linux Enterprise High Performance Computing 12 SP5 | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP4-LTSS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP4-LTSS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP5 | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP5-LTSS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP5-LTSS | Affected |
| SUSE Linux Enterprise Module for Basesystem 15 SP4 | Affected |
| SUSE Linux Enterprise Module for Basesystem 15 SP5 | Affected |
| SUSE Linux Enterprise Module for Basesystem 15 SP6 | Affected |
| SUSE Linux Enterprise Module for Development Tools 15 SP4 | Affected |
| SUSE Linux Enterprise Module for Development Tools 15 SP5 | Affected |
| SUSE Linux Enterprise Module for Development Tools 15 SP6 | Affected |
| SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE | Affected |
| SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE | Affected |
| SUSE Linux Enterprise Server 12 SP5 | Affected |
| SUSE Linux Enterprise Server 12 SP5-LTSS | Affected |
| SUSE Linux Enterprise Server 12 SP5-LTSS | Affected |
| SUSE Linux Enterprise Server 15 SP4 | Affected |
| SUSE Linux Enterprise Server 15 SP4-LTSS | Affected |
| SUSE Linux Enterprise Server 15 SP4-LTSS | Affected |
| SUSE Linux Enterprise Server 15 SP5 | Affected |
| SUSE Linux Enterprise Server 15 SP5-LTSS | Affected |
| SUSE Linux Enterprise Server 15 SP5-LTSS | Affected |
| SUSE Linux Enterprise Server 15 SP6 | Affected |
| SUSE Linux Enterprise Server 15 SP6-LTSS | Affected |
| SUSE Linux Enterprise Server 15 SP6-LTSS | Affected |
| SUSE Linux Enterprise Server LTSS Extended Security 12 SP5 | Affected |
| SUSE Linux Enterprise Server LTSS Extended Security 12 SP5 | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP4 | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP4 | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP5 | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP5 | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP6 | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP6 | Affected |
| SUSE CaaS Platform 4.0 | Affected |
| SUSE Enterprise Storage 6 | Affected |
| SUSE Enterprise Storage 7 | Affected |
| SUSE Enterprise Storage 7.1 | Affected |
| SUSE Linux Enterprise Desktop 11 SP4 | Affected |
| SUSE Linux Enterprise Desktop 15 SP1 | Affected |
| SUSE Linux Enterprise Desktop 15 SP2 | Affected |
| SUSE Linux Enterprise Desktop 15 SP3 | Affected |
| SUSE Linux Enterprise Desktop 15 SP4 | Affected |
| SUSE Linux Enterprise Desktop 15 SP5 | Affected |
| SUSE Linux Enterprise Desktop 15 SP6 | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP1 | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP1-ESPOS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP2 | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP2-ESPOS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP3 | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP4 | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP4-ESPOS | Affected |
| SUSE Linux Enterprise High Performance Computing 15 SP5-ESPOS | Affected |
| SUSE Linux Enterprise Micro 5.0 | Affected |
| SUSE Linux Enterprise Micro 5.1 | Affected |
| SUSE Linux Enterprise Micro 5.2 | Affected |
| SUSE Linux Enterprise Micro 5.2 | Affected |
| SUSE Linux Enterprise Module for Basesystem 15 SP1 | Affected |
| SUSE Linux Enterprise Module for Basesystem 15 SP2 | Affected |
| SUSE Linux Enterprise Module for Basesystem 15 SP3 | Affected |
| SUSE Linux Enterprise Module for Development Tools 15 SP1 | Affected |
| SUSE Linux Enterprise Module for Development Tools 15 SP2 | Affected |
| SUSE Linux Enterprise Module for Development Tools 15 SP3 | Affected |
| SUSE Linux Enterprise Real Time 15 SP2 | Affected |
| SUSE Linux Enterprise Real Time 15 SP3 | Affected |
| SUSE Linux Enterprise Real Time 15 SP4 | Affected |
| SUSE Linux Enterprise Real Time 15 SP4 | Affected |
| SUSE Linux Enterprise Real Time 15 SP5 | Affected |
| SUSE Linux Enterprise Server 11 SP4 | Affected |
| SUSE Linux Enterprise Server 11 SP4-LTSS | Affected |
| SUSE Linux Enterprise Server 15 SP1 | Affected |
| SUSE Linux Enterprise Server 15 SP1-BCL | Affected |
| SUSE Linux Enterprise Server 15 SP1-LTSS | Affected |
| SUSE Linux Enterprise Server 15 SP1-LTSS | Affected |
| SUSE Linux Enterprise Server 15 SP2 | Affected |
| SUSE Linux Enterprise Server 15 SP2-BCL | Affected |
| SUSE Linux Enterprise Server 15 SP2-LTSS | Affected |
| SUSE Linux Enterprise Server 15 SP2-LTSS | Affected |
| SUSE Linux Enterprise Server 15 SP3 | Affected |
| SUSE Linux Enterprise Server 15 SP3-BCL | Affected |
| SUSE Linux Enterprise Server 15 SP3-LTSS | Affected |
| SUSE Linux Enterprise Server 15 SP3-LTSS | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP1 | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP2 | Affected |
| SUSE Linux Enterprise Server for SAP Applications 15 SP3 | Affected |
| SUSE Manager Proxy 4.0 | Affected |
| SUSE Manager Proxy 4.1 | Affected |
| SUSE Manager Proxy 4.2 | Affected |
| SUSE Manager Proxy 4.3 | Affected |
| SUSE Manager Proxy LTS 4.3 | Affected |
| SUSE Manager Retail Branch Server 4.0 | Affected |
| SUSE Manager Retail Branch Server 4.1 | Affected |
| SUSE Manager Retail Branch Server 4.2 | Affected |
| SUSE Manager Retail Branch Server 4.3 | Affected |
| SUSE Manager Retail Branch Server LTS 4.3 | Affected |
| SUSE Manager Server 4.0 | Affected |
| SUSE Manager Server 4.1 | Affected |
| SUSE Manager Server 4.2 | Affected |
| SUSE Manager Server 4.3 | Affected |
| SUSE Manager Server LTS 4.3 | Affected |
| SUSE Real Time Module 15 SP4 | Affected |
| SUSE Real Time Module 15 SP5 | Affected |
| openSUSE Leap 15.3 | Affected |
| openSUSE Leap 15.4 | Affected |
| openSUSE Leap 15.4 | Affected |
| openSUSE Leap 15.5 | Affected |
| openSUSE Leap 15.5 | Affected |
| openSUSE Leap 15.6 | Affected |
| SUSE Linux Enterprise Server for NVIDIA 16.1 | Affected |
EUVD-2026-86174
GHSA-59gw-x2m7-5p58
NVD
CVE.org
EPSS
VulDB
Exploit-DB