Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessIdentify exposed SCG management interface
-
DeliveryExtract or obtain hardcoded credentials
-
ExploitAuthenticate to SCG without valid account
-
ExecutionAccess sensitive configuration and support data
-
ImpactAlter gateway or device settings
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A07:2025 - Authentication Failures
ASVS 5.0
V6 - Authentication Credential externalization
MITRE ATT&CK
2 techniques across 2 tactics: Persistence, Credential Access The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Exploitation requires network-level reachability to the Dell SCG 5.0 management interface (AV:N). The primary limiting factor is AC:H: the attacker must first obtain or derive the hardcoded credentials, which typically requires either binary reverse engineering, a prior insider leak, or waiting for public credential disclosure following CVE publication. No authentication to SCG is required prior to exploitation (PR:N), and no user interaction is involved (UI:N). Exploitation is not limited to a specific operating mode or non-default configuration - the hardcoded credentials exist in all deployments of the affected versions. The meaningful constraint for defenders is network segmentation: if the SCG management interface is not exposed externally or is behind a VPN, the AV:N attack vector is effectively negated. |
| Impact | The CVSS 7.7 score with AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:L reflects a meaningful but not trivially exploitable vulnerability; the high attack complexity (AC:H) is the primary score-reducer and indicates that locating the hardcoded credential is a prerequisite step, not a given. Once the credential is publicly known - which commonly happens within days of CVE disclosure - effective complexity drops and real-world risk rises significantly. EPSS data is not provided, but hardcoded credential CVEs historically see rapid exploitation uptake post-publication. There is no CISA KEV listing and no confirmed POC at time of analysis. No signals of active exploitation have been observed, but the exposure window for unpatched SCG instances is real: even a mid-sized municipal IT team in sopot relying on Dell SCG for remote hardware support should treat this as urgent patching work, given the potential for full unauthorized access with no privilege requirement after credential discovery. The A:L impact metric suggests availability degradation is a secondary concern relative to the high confidentiality and integrity risks. |
| Exploit ScenarioDerived | An attacker enumerates publicly documented or reverse-engineered hardcoded credentials associated with Dell SCG 5.0 following CVE publication, then uses those credentials to authenticate directly to the SCG management interface over the network without supplying any valid user account. With access established, the attacker can read sensitive configuration and support data (C:H) or alter gateway settings and connected device configurations (I:H). No public exploit code has been confirmed at time of analysis, but credential discovery is the only barrier once the CVE is disclosed. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Sep 07, 2026
Hard-coded credentials embedded in Dell Secure Connect Gateway (SCG) 5.0 expose both the Appliance and Application deployments to unauthenticated remote compromise. A network-accessible attacker who discovers or obtains the static credentials can authenticate without any supplied privileges and gain unauthorized access with high confidentiality and integrity impact. No public exploit or active CISA KEV listing has been identified at time of analysis; Dell has confirmed the vulnerability and released fixed versions via advisory DSA-2026-382.
RemediationAI
Dell has released patched versions to resolve this vulnerability. Administrators running the SCG 5.0 Appliance should upgrade to version 5.36.00.16 or later; those running the SCG 5.0 Application should upgrade to version 5.36.00.00 or later. Both fixes are documented in Dell advisory DSA-2026-382 at https://www.dell.com/support/kbdoc/en-in/000503426/dsa-2026-382-security-update-for-dell-secure-connect-gateway-virtual-edition-multiple-vulnerabilities. If immediate patching is not feasible, restrict network access to the SCG management interface using firewall rules or network ACLs to limit exposure to only authorized internal management networks, accepting the trade-off of reduced remote-support reach. Rotating or disabling any externally accessible accounts known to use the affected credential path should also be considered as a temporary compensating control.
Affected VersionsENISA
Affects your stack
Find out whether the stacks and servers you run are on an affected version.
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
CWE-798 (Use of Hard-coded Credentials) describes credentials baked directly into the software binary or configuration, which cannot be changed by operators and are shared identically across all deployments. Dell Secure Connect Gateway 5.0 is an enterprise remote-support and monitoring gateway used to securely connect Dell hardware to Dell's backend services. Two deployment forms are affected: the Appliance (virtual or hardware form factor, CPE cpe:2.3:a:dell:secure_connect_gateway_5.0_-_appliance) and the Application (software-only installation, CPE cpe:2.3:a:dell:secure_connect_gateway_5.0_-_application). The CVSS AC:H metric reflects that exploitation likely requires prior discovery or extraction of the static credential - typically through binary analysis, public disclosure, or prior insider access - before the credential can be leveraged over the network.
Know when Secure Connect Gateway 5 0 Appliance gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:L
Network-reachable but AC:H because credential discovery is required before use; PR:N since hardcoded creds bypass authentication entirely; A:L per limited availability impact.
Primary rating from Vendor (dell).
CVSS VectorVendor: dell
Lifecycle Timeline
2DescriptionCVE.org
Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Use of Hard-coded Credentials vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access.
Executive ViewAI
Dell Secure Connect Gateway (SCG) 5.0 contains hardcoded administrative credentials that permit unauthenticated remote access to the appliance, potentially compromising the confidentiality and integrity of all traffic and communications it protects. While no public exploit has been identified at time of analysis, the ease of discovering or obtaining static credentials poses significant risk. Both appliance and application deployments are affected, requiring all SCG 5.0 customers to apply the vendor patch immediately to maintain security infrastructure integrity.
Apply vendor patch.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Authentication bypass attacks exploit flaws in the verification mechanisms that control access to systems and applications.
Remote code execution in Dell Secure Connect Gateway (SCG) 5.0 allows an unauthenticated remote attacker to escape the i
Unauthorized ADMIN access in Dell Secure Connect Gateway (SCG) 5.0 allows a remote unauthenticated attacker to replay a
Remote command execution in Dell Secure Connect Gateway 5.0 (Appliance versions before 5.36.00.16 and Application versio
Unauthorized remote access to Dell Secure Connect Gateway (SCG) 5.0 is possible because the product fails to properly va
Relative path traversal in Dell Secure Connect Gateway (SCG) 5.0 allows a low-privileged remote attacker to traverse dir
Missing authentication on critical API functions in Dell Secure Connect Gateway (SCG) 5.0 exposes privileged operations
Improper certificate validation in Dell Secure Connect Gateway (SCG) 5.0 allows remote unauthenticated attackers to expl
Relative path traversal in Dell Secure Connect Gateway 5.0 (both Appliance and Application editions) exposes unauthentic
Dell Secure Connect Gateway (SCG) 5.0 exposes a critical management function without any authentication requirement (CWE
OS command injection in Dell Secure Connect Gateway (SCG) 5.0 enables a locally authenticated low-privilege attacker to
OS command injection in Dell Secure Connect Gateway (SCG) 5.0 - both Appliance (prior to 5.36.00.16) and Application (pr
Local privilege escalation in Dell Secure Connect Gateway 5.0 enables a low-privileged authenticated user with local she
EUVD-2026-72371
GHSA-c624-x4g7-4vr7
NVD
CVE.org
EPSS
Vulnrichment
Exploit-DB