Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessIdentify exposed Dell SCG 5.0 interface
-
DeliveryCraft relative path traversal payload
-
ExploitSend unauthenticated HTTP request
-
ExecutionEscape intended directory boundary
-
PersistWrite or invoke malicious content on server
-
ImpactAchieve remote code execution
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A01:2025 - Broken Access Control
ASVS 5.0
V5 - File Handling Relative path traversal prevention
|
| Exploitation Conditions | The vulnerability is exploitable without authentication (PR:N) from a remote network position (AV:N) with no user interaction required, targeting the default-installed SCG 5.0 product. AC:H indicates that exploitation requires specific conditions beyond merely sending a request - likely precise path construction, knowledge of the server's directory structure, or a multi-step sequence - which is corroborated by SSVC's 'Automatable: no' classification. No non-default feature flag or configuration toggle has been documented as a prerequisite; both Appliance and Application deployment forms are affected as shipped. Exploitation is bounded to SCG 5.0 releases prior to the fixed versions; 5.36.00.16+ (Appliance) and 5.36.00.00+ (Application) are not affected. |
| Impact | The CVSS 3.1 vector AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H scores 8.1. The high attack complexity (AC:H) is the primary risk-moderating factor, directly corroborated by SSVC's 'Automatable: no' determination - exploitation cannot be reliably scripted at scale and likely requires precise payload construction or specific target knowledge. SSVC Technical Impact is rated 'total', consistent with the full C:H/I:H/A:H CVSS impact triad and the claimed RCE outcome. EPSS of 0.53% (43rd percentile) is low, and there is no CISA KEV listing and no known POC at time of analysis. Taken together, these signals describe a high-severity but operationally constrained threat: mass, automated exploitation is unlikely in the near term, but a motivated attacker with access to the SCG interface and sufficient target knowledge could achieve full host compromise without any credentials. The combination of unauthenticated network reachability and total technical impact means patching should not be deferred despite the low EPSS. |
| Exploit ScenarioDerived | An unauthenticated attacker with network access to a Dell SCG 5.0 instance sends a crafted HTTP request embedding a relative path traversal sequence in a vulnerable parameter, directing the server to access files outside its intended root directory. By navigating to a writable or executable location and placing or invoking malicious content, the attacker achieves code execution on the SCG host without any credentials. The AC:H rating indicates this likely requires non-trivial payload crafting or knowledge of the target's directory layout, limiting casual or automated mass exploitation. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv2 – Sep 11, 2026
Relative path traversal in Dell Secure Connect Gateway 5.0 (both Appliance and Application editions) exposes unauthenticated remote attackers to a full-compromise pathway culminating in remote code execution. Both hardware appliance deployments (prior to 5.36.00.16) and software/virtual application deployments (prior to 5.36.00.00) are affected, as confirmed by Dell advisory DSA-2026-382. No public exploit code or active exploitation has been identified at time of analysis; EPSS exploitation probability stands at 0.53%, and SSVC classifies exploitation status as none.
Earlier versions of this analysis (1)
Relative path traversal in Dell Secure Connect Gateway (SCG) 5.0 - both Appliance and Application variants - enables unauthenticated remote attackers to escape the intended filesystem boundary, leading to remote code execution. The flaw (CWE-23) is network-reachable with no authentication or user interaction required, though the CVSS AC:H rating indicates exploitation is not trivially repeatable under all conditions. Dell has confirmed the issue under advisory DSA-2026-382 and released patched versions for both product forms. No public exploit or CISA KEV listing has been identified at time of analysis.
RemediationAI
Upgrade Dell Secure Connect Gateway 5.0 Appliance to version 5.36.00.16 or later, and SCG 5.0 Application to version 5.36.00.00 or later, per Dell advisory DSA-2026-382 at https://www.dell.com/support/kbdoc/en-in/000503426/dsa-2026-382-security-update-for-dell-secure-connect-gateway-virtual-edition-multiple-vulnerabilities. If immediate patching is not feasible, restrict network-layer access to the SCG management interface using firewall ACLs that permit connections only from known Dell support IP ranges and authorized management hosts, reducing the effective reach of the unauthenticated network vector. This network restriction is a temporary compensating control only - it does not eliminate the underlying path traversal flaw and must be replaced by the vendor patch.
Affected VersionsENISA
Affects your stack
Find out whether the stacks and servers you run are on an affected version.
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
Dell Secure Connect Gateway (SCG) 5.0 is an enterprise remote-support connectivity platform that enables Dell technical staff to access customer infrastructure. Two distinct deployment forms are affected: a hardware appliance (CPE: cpe:2.3:a:dell:secure_connect_gateway_5.0_-_appliance:*:*:*:*:*:*:*:*) and a software/virtual application (CPE: cpe:2.3:a:dell:secure_connect_gateway_5.0_-_application:*:*:*:*:*:*:*:*). CWE-23 (Relative Path Traversal) identifies the root cause: user-controlled input passed to file-path operations is not adequately normalized or restricted, permitting traversal sequences (e.g., '../') to escape the intended directory boundary. The escalation from directory traversal to remote code execution - as stated in the advisory - implies the traversal is leveraged to read, write, or trigger execution of content in sensitive server locations, though the exact intermediate step (file write, log injection, template execution) is not specified in available data.
Know when Secure Connect Gateway 5 0 Appliance gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H
Unauthenticated network path traversal with high complexity required to achieve RCE; full C/I/A impact consistent with arbitrary code execution on the SCG host.
Primary rating from Vendor (dell).
CVSS VectorNVD
Lifecycle Timeline
4DescriptionNVD
Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains a Relative Path Traversal vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to remote execution.
Executive ViewAI
Dell Secure Connect Gateway 5.0 (appliance and application editions) contains a remote-code-execution vulnerability exploitable by unauthenticated network attackers; no public exploit identified at time of analysis. Organizations deploying SCG for federated access control face complete infrastructure compromise if unpatched. Vendor patches are immediately available; deployment within 24 hours is critical for internet-exposed deployments.
Apply vendor patch.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Path traversal exploits occur when applications use user-controlled input to construct file system paths without proper validation.
Remote code execution in Dell Secure Connect Gateway (SCG) 5.0 allows an unauthenticated remote attacker to escape the i
Unauthorized ADMIN access in Dell Secure Connect Gateway (SCG) 5.0 allows a remote unauthenticated attacker to replay a
Remote command execution in Dell Secure Connect Gateway 5.0 (Appliance versions before 5.36.00.16 and Application versio
Unauthorized remote access to Dell Secure Connect Gateway (SCG) 5.0 is possible because the product fails to properly va
Relative path traversal in Dell Secure Connect Gateway (SCG) 5.0 allows a low-privileged remote attacker to traverse dir
Missing authentication on critical API functions in Dell Secure Connect Gateway (SCG) 5.0 exposes privileged operations
Improper certificate validation in Dell Secure Connect Gateway (SCG) 5.0 allows remote unauthenticated attackers to expl
Dell Secure Connect Gateway (SCG) 5.0 exposes a critical management function without any authentication requirement (CWE
OS command injection in Dell Secure Connect Gateway (SCG) 5.0 enables a locally authenticated low-privilege attacker to
OS command injection in Dell Secure Connect Gateway (SCG) 5.0 - both Appliance (prior to 5.36.00.16) and Application (pr
Local privilege escalation in Dell Secure Connect Gateway 5.0 enables a low-privileged authenticated user with local she
Privilege escalation in Dell Secure Connect Gateway (SCG) 5.0 allows a local attacker with basic system access to gain f
EUVD-2026-72373
GHSA-j7pm-xf89-ghjm
NVD
CVE.org
EPSS
Vulnrichment
VulDB
Exploit-DB