Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessReach network-facing HPE service
-
ExploitSatisfy required non-trivial conditions
-
ImpactTrigger flaw and disclose/impact sensitive data
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A05:2025 - Injection
ASVS 5.0
V1 - Encoding and Sanitization Command injection prevention
MITRE ATT&CK
1 technique across 1 tactic: Execution The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Per the CVSS vector, exploitation is remote (AV:N) and requires no authentication (PR:N) and no user interaction (UI:N), but AC:H indicates success depends on conditions outside the attacker's full control. The specific product feature, protocol, or configuration that must be present is not described in the available sources - no description, CWE, or retrievable advisory content was provided - so the exact prerequisite cannot be named. The primary limiting factor is the high attack complexity; the affected HPE networking product, version range, and whether a non-default configuration is required are unverified and must be confirmed from HPE bulletin hpesbnw05162en_us. |
| Impact | Signals are mixed and the underlying data is thin. The CVSS 3.1 base score of 8.1 (AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H) describes a network-reachable, unauthenticated flaw with high impact to confidentiality, integrity, and availability, but with high attack complexity (AC:H) meaning success depends on conditions the attacker does not fully control. The vuln.today decision label is 'this_week', indicating elevated but not emergency urgency. No CISA KEV listing, no EPSS probability, and no public exploit reference are present in the input, so exploitation is unproven and likely non-trivial given AC:H. Two conflicts must be flagged for verification: (1) the only tag is 'Information Disclosure' (a confidentiality concern), yet the CVSS vector asserts I:H and A:H as well - the scope of impact beyond disclosure cannot be reconciled from the data and should be confirmed against the HPE advisory; (2) no description or CWE is provided, so the CVSS vector is the sole technical signal and cannot be independently validated. Net: a genuinely high-severity rating by CVSS, but real-world priority is tempered by AC:H, absence of any exploitation evidence, and the need to confirm the actual impact against vendor documentation. |
| Exploit ScenarioDerived | A remote attacker with network access to an affected HPE networking product attempts to trigger the flaw without authentication or user interaction, relying on specific conditions being met (AC:H) to reach the vulnerable code path and disclose or manipulate sensitive data. No public exploit code or proof-of-concept is identified in the available data, and the exact trigger is not described in the sources. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 22, 2026
Information disclosure in HPE Networking products (CVE-2026-79890) has a CVSS 3.1 base score of 8.1; the assessed vector AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H describes remote, unauthenticated exploitation with no user interaction, while high attack complexity means success depends on conditions outside the attacker's full control. The affected HPE product, version range, and required configuration are not described in the available sources and must be confirmed from HPE bulletin hpesbnw05162en_us, and the tag only classifies the issue as Information Disclosure. No public exploit identified at time of analysis, and the vuln.today priority label is this_week; signals are mixed and the underlying data is thin.
RemediationAI
No vendor-released patch or fixed version is identified in the provided data; the HPE security bulletin hpesbnw05162en_us at https://support.hpe.com/hpesc/public/docDisplay?docId=hpesbnw05162en_us&docLocale=en_US is the authoritative source for patch availability, affected versions, and any vendor-prescribed workaround. Because the affected feature, protocol, and configuration are not described, no product-specific mitigation can be confirmed from the available evidence. Organizations should obtain the bulletin and apply the HPE-listed fixed release or documented workaround once the affected product is confirmed; if the advisory provides interim guidance, follow it exactly rather than applying unverified generic changes.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The available intelligence does not name the affected HPE product family, protocol, or software component, and no CWE is assigned, so the root-cause class cannot be stated beyond the 'Information Disclosure' tag. The CVSS 3.1 vector AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H indicates a network-reachable issue that requires no privileges and no user interaction, but the high attack-complexity metric reflects prerequisites not described in the sources; it should not be interpreted as a specific race condition, memory-grooming requirement, or timing dependency without supporting evidence. No CPE data is supplied, so exact affected products cannot be enumerated from the feed; HPE bulletin hpesbnw05162en_us is the only referenced technical source and must be retrieved to identify the component, deployment mode, and any non-default configuration needed for exploitation.
Know when Hpe gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H
Vector retained as supplied (network, unauthenticated, high-complexity, full CIA impact); no description exists to independently revise PR, AC, or impact metrics.
Primary rating from Vendor (hpe).
CVSS VectorVendor: hpe
DescriptionCVE.org
No description provided
Executive ViewAI
HPE Networking products are affected by a high-severity information disclosure vulnerability (CVE-2026-79890) that can be triggered remotely and without authentication. However, successful exploitation depends on favorable conditions that are not fully within an attacker's control, and the specific affected product and version range have not yet been confirmed. Leadership should care because network infrastructure credentials or configuration data could be exposed, potentially undermining the integrity and confidentiality of the wider network estate. The immediate priority is to identify which HPE products are affected using the vendor bulletin, because management of the exposure is not possible until asset scope is known.
No vendor-released patch identified at time of analysis. Interim mitigations: restrict and segment management-plane access to HPE Networking devices to trusted administrative networks only; require strong authentication and logging on management interfaces; monitor for suspicious remote access and configuration exfiltration attempts; confirm affected product/version scope via HPE bulletin hpesbnw05162en_us and apply the vendor patch as soon as it is released.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
OS command injection occurs when an application passes unsanitized user input directly into system shell commands.
An unprivileged network attacker could gain system privileges to provisioned Intel manageability SKUs: Intel Active Mana
The read_mru_list function in NTP before 4.2.8p9 allows remote attackers to cause a denial of service (crash) via a craf
Default, hard-coded credentials shipped on several administrative and system accounts in HPE's Analytics and Location En
A directory traversal vulnerability in Hewlett Packard Enterprise Insight Remote Support may allow remote code execution
A potential security vulnerability has been identified in Hewlett Packard Enterprise OfficeConnect 1820, 1850, and 1920S
A security vulnerability in HPE Smart Update Manager (SUM) prior to version 8.5.6 could allow remote unauthorized access
A vulnerability in HPE Insight Remote Support (IRS) prior to v7.15.0.646 may allow an unauthenticated denial of service
NTP through 4.2.8p12 has a NULL Pointer Dereference. Rated high severity (CVSS 7.5), this vulnerability is remotely expl
A maximum-severity, network-reachable flaw (CVSS 3.1 base 10.0) in an as-yet-unnamed HPE product allows remote attackers
Unauthenticated network attackers can potentially achieve high confidentiality, integrity, and availability impact again
HPE security bulletin hpesbnw05162en_us documents a maximum-severity (CVSS 10.0) exposure in an HPE product that is not
HPE advisory hpesbnw05162en_us covers a product flaw carrying a CVSS 3.1 base score of 10.0 (AV:N/AC:L/PR:N/UI:N/S:C/C:H
EUVD-2026-108390
GHSA-78gw-mfhh-7cmf
NVD
CVE.org
EPSS
Vulnrichment
VulDB
Exploit-DB