Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessGain adjacent-network foothold
-
ExploitSend crafted traffic to HPE networking device
-
ExecutionTrigger unauthenticated flaw (AC:L, PR:N)
-
ImpactCompromise device confidentiality, integrity and availability
Vulnerability Assessment
| Exploitation Conditions | Exploitation requires network adjacency (CVSS AV:A): the attacker must reach the HPE networking device from the same logical/adjacent network - e.g., the same LAN segment, VLAN, Wi-Fi network, or a dedicated management network - not arbitrary internet-wide access, which is the primary limiting factor. Within that position, the attack needs no authentication (PR:N) and no user interaction (UI:N), and is low-complexity (AC:L). The exact product feature, protocol, or configuration that triggers the flaw is not described in the available sources (no CVE description was provided); the specific affected HPE networking product, versions, and any non-default configuration dependency should be confirmed directly from HPE bulletin hpesbnw05162en_us. |
| Impact | The CVSS 3.1 vector (CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H, base 8.8 HIGH) describes a low-complexity, unauthenticated attack from an adjacent network position yielding high confidentiality, integrity, and availability impact. The vuln.today decision label is 'this_week', indicating elevated but not emergency priority. Key corroborating signals are absent: no EPSS probability, no CISA KEV listing, and no public PoC or exploit reference are provided, so there is no public exploit identified at time of analysis and no evidence of active exploitation. Note a conflict between signals: the only tag is 'Information Disclosure', yet the CVSS vector asserts HIGH integrity and availability impact (I:H/A:H) in addition to confidentiality - the tag understates the stated impact, so the true nature of the flaw cannot be confirmed from the tag alone and should be verified against the HPE advisory. The AV:A (adjacent) vector is a meaningful limiter versus a fully remote AV:N issue: exploitation requires a foothold on the same logical network segment (e.g., same LAN/VLAN or wireless/management network) rather than arbitrary internet reachability, which reduces mass-exploitation potential and points toward an attacker already inside the network perimeter. Overall this is a genuine high-severity issue warranting prompt patching per the 'this_week' label, but the adjacency requirement and absence of EPSS/KEV/PoC signals argue against treating it as an active, widespread emergency. |
| Exploit ScenarioDerived | An attacker who has gained a position on the same adjacent network segment as a vulnerable HPE networking device (for example, a compromised host on the same VLAN or management network) sends crafted traffic to the device without needing credentials or user interaction. Per the CVSS vector (AV:A/AC:L/PR:N/UI:N), the low-complexity, unauthenticated nature means a single reliable interaction could compromise the device's confidentiality, integrity, and availability. The specific trigger mechanism is not described in the available sources, and no public exploit code has been identified. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 22, 2026
Unauthenticated attackers positioned on an adjacent network segment can achieve high confidentiality, integrity, and availability impact against affected HPE networking equipment, per HPE security bulletin hpesbnw05162en_us. The CVSS 3.1 vector (AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H, base 8.8) indicates the attack needs no credentials or user interaction and is low-complexity once network adjacency is established, which is the primary limiting factor; internet-wide exploitation is not implied. No CVE description, CWE mapping, or public exploit reference was supplied, and no confirmed active exploitation (CISA KEV) status is available at time of analysis.
RemediationAI
Consult HPE security bulletin hpesbnw05162en_us (https://support.hpe.com/hpesc/public/docDisplay?docId=hpesbnw05162en_us&docLocale=en_US) to identify the fixed firmware release for each affected product and upgrade to that version; the supplied data does not list an exact fix version, so no version number should be assumed. Because exploitation requires network adjacency with no authentication or user interaction, the effective compensating control while patching is to restrict reachability of the affected device's management and data-plane interfaces to trusted segments - segment management traffic onto a dedicated VLAN, apply ACLs or firewall rules limiting which hosts can reach the device, and avoid exposing the interface to untrusted Wi-Fi or user VLANs - with the trade-off that this constrains legitimate administrative access paths and requires accurate inventory of authorized management hosts. No vendor-stated workaround beyond updating is documented in the supplied sources.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The vulnerability resides in HPE networking products, with the vendor bulletin hpesbnw05162en_us serving as the only authoritative source; the report was routed by security-alert@hpe.com and tagged 'Information Disclosure', although the assessed CVSS vector indicates high impact across confidentiality, integrity, and availability rather than disclosure alone. No CWE classification was provided, so the root-cause class cannot be attributed to a specific weakness family, and the trigger mechanism, affected feature, protocol, or configuration prerequisite is not described in the available sources. From the vector, exploitation requires adjacency (AV:A) - same LAN segment, VLAN, Wi-Fi network, or management network - with no privileges (PR:N) and no user interaction (UI:N); scope is unchanged (S:U), meaning impact is confined to the vulnerable device's security authority. The specific product models, firmware branches, and version ranges must be confirmed directly from the HPE advisory.
Know when the next one hits your stack
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Adopts the vendor-adjacent vector: AV:A for same-segment reach, PR:N/UI:N as HPE asserts unauthenticated low-complexity access, with full C/I/A high impact; trigger mechanism unverified.
Primary rating from Vendor (hpe).
CVSS VectorVendor: hpe
DescriptionCVE.org
No description provided
Executive ViewAI
HPE networking equipment is exposed to a high-severity, unauthenticated vulnerability (CVE-2026-79878) that allows attackers with adjacent network access to fully compromise confidentiality, integrity, and availability. Leadership should prioritize immediate assessment and mitigation because this flaw could enable lateral movement and service disruption within network segments, affecting operations and data protection until a patch is released.
No vendor-released patch identified at time of analysis. Interim mitigations per HPE security bulletin hpesbnw05162en_us include restricting management access, implementing strict network segmentation, and monitoring for unauthorized adjacent network access.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.
EUVD-2026-108378
GHSA-2j58-65w6-h54h
NVD
CVE.org
EPSS
VulDB
Exploit-DB