Skip to main content

HPE Networking CVE-2026-79861

| EUVDEUVD-2026-108361 CRITICAL
2026-10-22 security-alert@hpe.com GHSA-gx4m-v6xv-rg2g
9.8
CVSS 3.1 · Vendor: hpe
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Reach product over network
  2. Exploit
    Send crafted request
  3. Execution
    Trigger unauthenticated flaw
  4. Impact
    Obtain high-impact compromise

Vulnerability Assessment

Exploitation Conditions

No CVE description was provided, so the specific product feature, protocol, or configuration required to trigger this flaw cannot be named from the available sources - the HPE advisory (hpesbnw05162en_us) must be consulted to identify the affected product, deployment mode, and version range. Based solely on the supplied CVSS vector (AV:N/AC:L/PR:N/UI:N), exploitation would require network reachability to the affected HPE networking device with no authentication and no user interaction, but which network service or interface must be exposed is not stated in the available data. Limiting factors (specific affected versions, whether a non-default feature must be enabled, and whether management-plane vs. data-plane access is needed) are unverified and should be confirmed against the vendor bulletin.

Impact

The input CVSS 3.1 vector (AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H, base 9.8) describes a network-reachable, low-complexity flaw requiring no privileges and no user interaction, with high impact to confidentiality, integrity and availability - the profile of a critical, remotely exploitable issue. The vuln.today decision label is 'act_now', which signals high prioritization. However, several key corroborating signals are MISSING: no EPSS exploitation-probability score is provided, the CVE is NOT listed in CISA KEV, no public PoC or exploit reference is present, and no SSVC decision values (automatable, technical impact) are supplied, so the 'act_now' label cannot be cross-validated against those frameworks. There is also a CONFLICT in the data: the only technique tag is 'Information Disclosure' (a confidentiality-only characterization), yet the CVSS vector asserts I:H and A:H as well - these cannot both be fully correct, so the true impact scope should be verified against the HPE advisory. Most critically, NO description, CWE, or affected-product/version detail is provided, so the mechanism and real-world exposure are unverified. Net: the metrics point to a high-priority item, but the absence of EPSS/KEV/PoC means there is no evidence of active or imminent widespread exploitation - treat the 9.8/act_now as a vendor-driven patch priority rather than a confirmed in-the-wild threat, and confirm scope and affected versions with HPE bulletin hpesbnw05162en_us before acting.

Exploit ScenarioDerived

Per the supplied CVSS vector, a remote attacker with network reachability to the affected HPE networking product sends crafted traffic without needing credentials or user interaction, achieving a high-impact compromise. The exact trigger is not described in the available sources, as no CVE description or CWE was provided. No public exploit code or PoC reference is present in the input.

Act Now Prioritize within 24-48h. Why: CRITICAL severity.
No patch listed yet 0.4% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 22, 2026

Unauthenticated, network-reachable compromise of an HPE networking product is described by HPE security bulletin hpesbnw05162en_us, which is scored CVSS 3.1 base 9.8 (AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H) - meaning an attacker who can reach the affected interface needs no credentials and no user interaction, and the impact spans confidentiality, integrity and availability. The supplied record contains no CVE description, no CWE and no CPE, so the specific product line, deployment mode and version range cannot be named from the available data; the vendor bulletin must be consulted to determine exactly which devices and firmware are in scope. Only a single reference (the HPE advisory) is available, no EPSS score or CISA KEV listing was supplied, and no public exploit has been identified at time of analysis, although the vendor-priority signal for this record is act_now. Note the record-level tag 'Information Disclosure' is narrower than the assessed vector, which rates integrity and availability impact as high as confidentiality.

RemediationAI

No fixed firmware version or patch identifier is present in the supplied intelligence, so remediation must be driven directly from HPE bulletin hpesbnw05162en_us (https://support.hpe.com/hpesc/public/docDisplay?docId=hpesbnw05162en_us&docLocale=en_US), which will list the corrected firmware releases per affected branch and any vendor-stated workaround; apply the highest fixed release the bulletin names for each deployed model. Because the assessed vector requires only network reachability with no authentication and no user interaction, the only exposure-limiting control supported by the available evidence is to reduce reachability of the device's network-accessible services - place management and any untrusted-facing interfaces behind strict network access control so that only trusted administrative networks can reach them - with the trade-off that remote management and monitoring paths from other segments stop working and must be re-homed through a jump host or out-of-band path. Restricting or disabling remote management entirely is a stronger but operationally disruptive option that removes remote administration capability. Do not treat these as a substitute for the vendor fix; confirm the exact affected services and prerequisites in the bulletin before deciding which interfaces to close.

Affected VersionsENISA

Unknown product 10.3.0.0 ≤10.4.1.13
Unknown product 10.6.0.0 ≤10.7.2.6
Unknown product 10.8.0.0 ≤10.8.1.1

Affected Packages

euvd unknown_product no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

The underlying technology is an HPE networking product identified only through the HPE Support Center bulletin identifier hpesbnw05162en_us; no CPE entries, product family names or firmware branches were included in the supplied intelligence, so the affected component (management plane, web/API service, control protocol or data plane) is unverified. No CWE is assigned in the input, so the root-cause class - for example injection, missing authentication on an exposed endpoint, memory-safety fault or unsafe deserialization - cannot be determined; the trigger is not described in the available sources. What the CVSS 3.1 vector does establish is the exploitability envelope: AV:N means the flaw is reachable over the network, AC:L means no special conditions or attacker-influenced state are recorded as required, PR:N means no privileges are needed, UI:N means no victim interaction, and S:U means impact stays within the vulnerable component's security scope. The C/I/A ratings of H/H/H indicate full loss of confidentiality, integrity and availability of the affected device, which is the profile of a pre-authentication remote compromise rather than a pure read-only information leak, and is in tension with the 'Information Disclosure' tag applied to this record.

Know when the next one hits your stack

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (hpe) PRIMARY 9.8 CRITICAL
AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
vuln.today AI 9.8 CRITICAL

No description was supplied, so metrics mirror the vendor-provided vector: network, low-complexity, unauthenticated, no interaction, with high C/I/A impact; independent mechanism verification was not possible.

3.1 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
4.0 AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N

Primary rating from Vendor (hpe).

CVSS VectorVendor: hpe

Attack Vector
Network
Attack Complexity
Low
Privileges Required
None
User Interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

DescriptionCVE.org

No description provided

Executive ViewAI

Why It Matters

HPE networking devices face a critical unauthenticated remote compromise vulnerability (CVE-2026-79861) that can lead to full confidentiality, integrity, and availability impact. Although no public exploit has been identified, the vendor's 'act now' priority and the lack of a patch mean that any exposed interface could be attacked without credentials, putting sensitive data and network operations at risk. Leadership should treat this as an urgent exposure requiring immediate mitigation and scoping of affected assets.

Business Impact: High
Compensating Controls

Restrict network access to affected interfaces using firewall rules and network segmentation; disable unnecessary services; enforce strong authentication where possible; monitor for unusual activity; apply vendor-provided mitigations from the HPE advisory.

Threat Intelligence Overview

EPSS Score
0.4%
Top 65% exploitable
Prevalence
Medium
HPE networking security bulletin; enterprise gear but specific product unidentified
Data Quality
5 sources
Confidence: Medium

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity CRITICAL
CISA KEV No
Public POC No
EPSS 0.4%
Patch available No
Active threat No
Deciding rule
CRITICAL severity
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision· derived
Scheduled
Exploitation· derived
None
System Exposure· derived
Open
Automatable· derived
Yes
Human Impact
High

Priority Score

49
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +49
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy