Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessIdentify exposed SCG 5.0 management endpoint
-
DeliverySend crafted request triggering incorrect operator
-
ExploitAuthentication check evaluates incorrectly
-
ExecutionGain unauthorized access to SCG interface
-
ImpactAccess support tunnel data or SCG configuration
Vulnerability Assessment
| Weakness |
CWE
ASVS 5.0
V15 - Secure Coding and Architecture Use of incorrect operator
|
| Exploitation Conditions | No special authentication is required-the CVSS vector PR:N confirms the flaw is reachable by unauthenticated remote attackers. The primary limiting condition is network reachability to the SCG 5.0 management interface; organizations that restrict SCG management access to internal networks or VPN reduce exposure substantially. Exploitation is bounded to SCG 5.0 (both Appliance and Application variants) at versions below the fixed releases; SCG deployments already at 5.36.00.16 (Appliance) or 5.36.00.00 (Application) or later are not affected. No specific non-default configuration is described as required. |
| Impact | The CVSS 7.3 score (AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L) indicates a network-exploitable, zero-authentication path with low complexity, which is operationally significant. However, the impact is capped at Low across all three CIA dimensions, indicating the flaw does not immediately yield full system compromise or complete data exfiltration-likely partial unauthorized access to SCG management functions or support data. No EPSS data was provided, no CISA KEV listing exists, and no public exploit code has been identified, all of which reduce urgency slightly relative to the raw score. That said, SCG gateways handle sensitive Dell support tunnels and diagnostic data for enterprise infrastructure; even 'limited' unauthorized access to this channel warrants prompt patching. The 'Authentication Bypass' characterization is defensible given CWE-480 in an auth-path context: no conflicting signals exist in the available data. |
| Exploit ScenarioDerived | An unauthenticated attacker with network access to the SCG 5.0 management interface sends a crafted HTTP request that triggers the incorrect operator logic in an authentication or authorization check. The flawed conditional evaluates to true regardless of credential input, granting the attacker partial access to SCG functions or data without valid credentials. No public exploit code has been identified, but the low attack complexity (AC:L) means exploitation does not require sophisticated tooling once the vulnerable endpoint is identified. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Sep 07, 2026
Unauthorized remote access to Dell Secure Connect Gateway (SCG) 5.0 is possible through a logic flaw rooted in CWE-480 (Use of Incorrect Operator), affecting both the Appliance variant (prior to 5.36.00.16) and the Application variant (prior to 5.36.00.00). The incorrect operator in a security-relevant conditional-likely an authentication or authorization check-produces a logic outcome that permits access without valid credentials, consistent with the CVSS PR:N vector and the 'Authentication Bypass' classification. Real-world impact spans limited confidentiality, integrity, and availability loss per the CVSS L/L/L impact ratings; no public exploit code or CISA KEV entry has been identified at time of analysis.
RemediationAI
Vendor-released patch is available per Dell advisory DSA-2026-382 (https://www.dell.com/support/kbdoc/en-in/000503426/dsa-2026-382-security-update-for-dell-secure-connect-gateway-virtual-edition-multiple-vulnerabilities). Upgrade the SCG 5.0 Appliance to version 5.36.00.16 or later, and the SCG 5.0 Application to version 5.36.00.00 or later. If immediate patching is not feasible, restrict network access to the SCG management interface to trusted internal IP ranges via firewall ACLs or network segmentation-this does not eliminate the vulnerability but raises the bar from unauthenticated remote exploitation to exploitation requiring local-network adjacency. Note that SCG gateway connectivity to Dell's support infrastructure may be disrupted if the gateway is taken offline, so coordinate upgrade windows with support teams accordingly.
Affected VersionsENISA
Affects your stack
Find out whether the stacks and servers you run are on an affected version.
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
Dell Secure Connect Gateway 5.0 is Dell's enterprise remote-support and monitoring gateway, successor to the ESRS platform, used by large organizations to enable Dell ProSupport connectivity. CWE-480 (Use of Incorrect Operator) describes a class of logic errors where a developer uses the wrong operator in a conditional expression-classic examples include assignment (=) instead of comparison (==), bitwise AND (&) instead of logical AND (&&), or relational operators producing unintended truthy/falsy results. When such an error exists in an authentication or access-control code path, the condition may evaluate in a way that grants access regardless of credential validity. The affected CPEs are cpe:2.3:a:dell:secure_connect_gateway_5.0_-_application and cpe:2.3:a:dell:secure_connect_gateway_5.0_-_appliance, both with all sub-versions below the fixed releases confirmed by EUVD-2026-72483.
Know when Secure Connect Gateway 5 0 Appliance gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L
Network-reachable unauthenticated flaw with no interaction; partial CIA impact consistent with limited unauthorized access, not full compromise.
Primary rating from Vendor (dell).
CVSS VectorVendor: dell
Lifecycle Timeline
2DescriptionCVE.org
Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Use of Incorrect Operator vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access.
Executive ViewAI
Dell Secure Connect Gateway versions 5.0 prior to patch contain an unauthenticated remote access vulnerability, enabling attackers to bypass authentication controls and gain access to security infrastructure without valid credentials.
Apply vendor patch.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Authentication bypass attacks exploit flaws in the verification mechanisms that control access to systems and applications.
Remote code execution in Dell Secure Connect Gateway (SCG) 5.0 allows an unauthenticated remote attacker to escape the i
Unauthorized ADMIN access in Dell Secure Connect Gateway (SCG) 5.0 allows a remote unauthenticated attacker to replay a
Remote command execution in Dell Secure Connect Gateway 5.0 (Appliance versions before 5.36.00.16 and Application versio
Unauthorized remote access to Dell Secure Connect Gateway (SCG) 5.0 is possible because the product fails to properly va
Relative path traversal in Dell Secure Connect Gateway (SCG) 5.0 allows a low-privileged remote attacker to traverse dir
Missing authentication on critical API functions in Dell Secure Connect Gateway (SCG) 5.0 exposes privileged operations
Improper certificate validation in Dell Secure Connect Gateway (SCG) 5.0 allows remote unauthenticated attackers to expl
Relative path traversal in Dell Secure Connect Gateway 5.0 (both Appliance and Application editions) exposes unauthentic
Dell Secure Connect Gateway (SCG) 5.0 exposes a critical management function without any authentication requirement (CWE
OS command injection in Dell Secure Connect Gateway (SCG) 5.0 enables a locally authenticated low-privilege attacker to
OS command injection in Dell Secure Connect Gateway (SCG) 5.0 - both Appliance (prior to 5.36.00.16) and Application (pr
Local privilege escalation in Dell Secure Connect Gateway 5.0 enables a low-privileged authenticated user with local she
EUVD-2026-72483
GHSA-4782-5gff-8jxf
NVD
CVE.org
EPSS
Vulnrichment
VulDB
Exploit-DB