GHSA-q5xj-w646-fr8r
Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessObtain authenticated Jenkins account
-
DeliveryLeverage granted Jenkins permission
-
ExploitSubmit crafted configuration or request
-
ExecutionTrigger controller-side flaw (mechanism unconfirmed for this CVE)
-
ImpactImpact undetermined from available data
Vulnerability Assessment
| Exploitation Conditions | Exploitation prerequisites for CVE-2026-117619 are not stated in the available sources - its per-CVE description is absent from the supplied advisory excerpt, so the exact required Jenkins feature, permission, or configuration cannot be named. What is confirmed from the surrounding advisory is that the affected scope is Jenkins core 2.587 and earlier / LTS 2.580.1 and earlier, and that the fix is Jenkins 2.588 / LTS 2.580.2. The other issues in this same advisory uniformly require an authenticated, permissioned user (e.g., Overall/Read, Item/Configure, View/Configure, Agent/Configure, or Item/Create) rather than anonymous access, which suggests a privilege prerequisite is likely here too - but this is not verified for -117619. Verify the exact preconditions against the per-CVE entry at https://www.jenkins.io/security/advisory/2026-10-28/. |
| Impact | Risk cannot be assessed with confidence for CVE-2026-117619 specifically, because the supplied data does not contain a description for this CVE. The oss-security post and the Jenkins advisory 2026-10-28 are a BUNDLE covering many Jenkins core issues (CVE-2026-117612, -117613, -117614, -117615, -117616, -117617, -117621, -117622 are summarized), but CVE-2026-117619 is NOT among the summaries provided - its entry is absent from the excerpt. No CVSS vector is supplied (the linked article reports CVSS/CVE/CWE as N/A at the summary level), EPSS is not provided, there is no CISA KEV listing, and no PoC or exploit reference appears. The vuln.today Decision label is 'awaiting_data', which is consistent with this gap and means this is NOT currently flagged as an act_now/emergency item. Across the Jenkins core issues that ARE described in this advisory, the common pattern is an authenticated attacker holding specific Jenkins permissions (Overall/Read, Item/Configure, Agent/Configure, or Item/Create) abusing configuration/deserialization/file-handling paths on the controller, several of which can escalate to RCE; however, applying that pattern to -117619 would be speculation. Net: this is a vendor-confirmed Jenkins core advisory (fixes shipped), but for THIS specific CVE the real-world priority is undetermined pending the per-CVE description, severity, and CVSS vector from the Jenkins advisory. |
| Exploit ScenarioDerived | No realistic scenario can be constructed for CVE-2026-117619 because its specific description, affected component, and mechanism are missing from the supplied data (it is one of several CVEs in the 2026-10-28 Jenkins bundle that were not detailed in the provided excerpt). The broader advisory's described issues generally require an attacker to already hold a Jenkins user account with a */Configure or Overall/Read permission before abusing controller-side handling, but whether -117619 follows that model is unconfirmed. No PoC or exploit reference is present in the input. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 28, 2026
Jenkins core 2.587 and earlier, along with LTS 2.580.1 and earlier, are affected by CVE-2026-117619, one of eight security issues addressed in the Jenkins advisory dated 2026-10-28 and fixed in Jenkins 2.588 and LTS 2.580.2. The per-CVE description for this specific identifier is not present in the supplied advisory excerpt, so neither the vulnerability class nor the precise attacker impact can be stated from the available data - only the affected scope and the fixed versions are confirmed. Every other entry in the same advisory requires an authenticated user holding specific Jenkins permissions (Overall/Read, Item/Configure, View/Configure, Agent/Configure, Item/Create) rather than anonymous access, which suggests a similar privilege prerequisite is likely here, but that remains unverified. No public exploit code and no CISA KEV entry are associated with this identifier in the supplied intelligence, and the priority decision is awaiting_data.
RemediationAI
Upgrade Jenkins core to 2.588 or Jenkins LTS to 2.580.2, which the 2026-10-28 advisory (https://www.jenkins.io/security/advisory/2026-10-28/) names as the releases containing fixes for CVE-2026-117619 and the other issues published the same day; no targeted workaround can be prescribed for this identifier because its trigger is not described in the supplied sources, so the upgrade is the only complete fix identified. Administrators running 2.588 or LTS 2.580.2 who encounter problems with the newly enforced XStream type permission system can disable that layer with the Java system property hudson.util.XStream2.SUPPRESS_TYPE_PERMISSION set to true, accepting the loss of that additional deserialization protection. Two mitigations from the advisory apply to sibling issues rather than confirmed for this CVE: enforcing Content Security Policy mitigates the known impact of the SECURITY-4225 and SECURITY-4232 cross-site scripting flaws on Jenkins 2.539 and newer / LTS 2.541.1 and newer, and deferring the upgrade is not advised since the underlying permission-based attack surface (Overall/Read, Item/Configure, View/Configure, Agent/Configure, Item/Create) is available to any authenticated Jenkins user holding those rights.
Affected VersionsENISA
Affects your stack
Find out whether the stacks and servers you run are on an affected version.
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
Jenkins core persists configuration and build data through XStream, wrapped in a custom deserialization filter derived from JEP-200 that permits only types defined in Jenkins core or plugins, or explicitly allowlisted ones, because deserialization gadgets typically abuse #readResolve behavior executed during object reconstruction. The sibling issues in the same 2026-10-28 advisory (SECURITY-4125/CVE-2026-117612 failing to filter classes named in the resolves-to attribute, SECURITY-4225/CVE-2026-117613 not restricting collection element types, and SECURITY-4249/CVE-2026-117622 restricting deserialization) all sit in that XStream and permission-model layer; the 2.588 and LTS 2.580.2 fix additionally adopts the XStream type permissions system alongside Jenkins' own converters. Other entries in the advisory cover command-agent launcher conversion without administrator approval (SECURITY-4123), symbolic-link following during item directory copy on rename (SECURITY-4187), an unvalidated agent-loading HTTP endpoint (SECURITY-4188), symlink handling during artifact extraction (SECURITY-4248), and agent-supplied workspace browser link URLs (SECURITY-4232). Which of these mechanisms, if any, corresponds to CVE-2026-117619 cannot be determined from the supplied excerpt; the trigger and root-cause class for this identifier are not described in the available sources, and no CWE or CVSS vector was provided.
Know when Jenkins gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Description PRE-NVD
Executive ViewAI
Jenkins core, a widely used automation server, is affected by a critical vulnerability (CVE-2026-117619) that impacts all versions up to 2.587 and LTS 2.580.1. Organizations relying on Jenkins for CI/CD pipelines face potential disruption if the flaw is exploited, though no active exploitation has been confirmed. Leadership should prioritize patching to maintain the integrity of software delivery operations.
Apply vendor patch.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
Attack Technique
Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.
Denial of service against HTTP/2 server implementations allows remote unauthenticated attackers to exhaust server resour
A sandbox bypass vulnerability exists in Jenkins Pipeline: Groovy Plugin 2.63 and earlier in pom.xml, src/main/java/org/
The Jenkins CLI subsystem in Jenkins before 1.638 and LTS before 1.625.2 allows remote attackers to execute arbitrary co
The remoting module in Jenkins before 2.32 and LTS before 2.19.3 allows remote attackers to execute arbitrary code via a
Multiple unspecified API endpoints in Jenkins before 1.650 and LTS before 1.642.2 allow remote authenticated users to ex
The Fingerprints pages in Jenkins before 1.638 and LTS before 1.625.2 might allow remote attackers to obtain sensitive j
The remoting module in Jenkins before 1.650 and LTS before 1.642.2 allows remote attackers to execute arbitrary code by
A sandbox bypass vulnerability exists in Jenkins Script Security Plugin 1.53 and earlier in src/main/java/org/jenkinsci/
A code execution vulnerability exists in the Stapler web framework used by Jenkins 2.153 and earlier, LTS 2.138.3 and ea
A sandbox bypass vulnerability exists in Jenkins Script Security Plugin 1.50 and earlier in src/main/java/org/jenkinsci/
A sandbox bypass vulnerability exists in Pipeline: Declarative Plugin 1.3.3 and earlier in. Rated high severity (CVSS 8.
A sandbox bypass vulnerability exists in Pipeline: Groovy Plugin 2.61 and earlier in src/main/java/org/jenkinsci/plugins
EUVD-2026-112184
CVE.org
Exploit-DB