GHSA-vrqw-5jr7-wx5r
Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessAuthenticate to Jenkins with low-privilege account
-
ExploitSubmit crafted configuration or agent payload
-
ExecutionTrigger flaw in Jenkins controller
-
ImpactExecute code or read/write controller files (mechanism for -117618 not in sources)
Vulnerability Assessment
| Exploitation Conditions | The exploitation prerequisites for CVE-2026-117618 are not stated in the provided sources - the advisory excerpt describes CVE-2026-117612 through -117617, -117621, and -117622 but does not include a description for the -117618 identifier. For the described sibling vulnerabilities in the same advisory, prerequisites range from Overall/Read permission plus a non-anonymous account, to Item/Configure, Agent/Configure, or Item/Create permission, meaning an authenticated foothold with configuration privileges is the limiting factor; whether any of these apply to -117618 specifically is unverified. The Jenkins advisory page (https://www.jenkins.io/security/advisory/2026-10-28/) must be consulted for this CVE's exact condition. |
| Impact | This entry is part of the Jenkins Security Advisory 2026-10-28, a bundle announcing multiple Jenkins core vulnerabilities (SECURITY-4125/CVE-2026-117612 through SECURITY-4249/CVE-2026-117622). The specific vulnerability CVE-2026-117618 is NOT individually described in the provided data - the advisory excerpt is truncated after SECURITY-4249/CVE-2026-117622, and no SECURITY- ticket or description maps to the -117618 identifier here, so its mechanism, severity, and permission prerequisites cannot be assessed from the supplied sources. On the signal side, the input provides no CVSS base vector (advisory and linked article 2 both report CVSS Score/Vector as N/A), no EPSS probability, no CISA KEV listing, and no POC/exploit reference; the vuln.today Decision label is 'awaiting_data', which is consistent with this incomplete picture rather than indicating low risk. For context, the siblings in the same advisory that ARE described are rated High by the Jenkins CNA and include deserialization RCE, agent-launch command injection, symlink-based arbitrary file read/write leading to RCE, and stored XSS - all gated behind some level of authenticated Jenkins permission (Overall/Read, Item/Configure, Agent/Configure, or Item/Create). Because -117618's own data is missing, any numeric-score comparison is impossible: there is no CVSS-vs-EPSS or KEV-vs-EPSS tension to resolve, only a genuine data gap. Treat this as 'awaiting data' - the correct action is to pull the per-CVE detail from the Jenkins advisory page before prioritizing, not to assume it is either critical or benign. |
| Exploit ScenarioDerived | The specific trigger for CVE-2026-117618 is not described in the available sources, so a precise scenario cannot be constructed without over-inferring. In the broader 2026-10-28 Jenkins core advisory, the described sibling flaws involve an attacker holding a modest authenticated permission (e.g., Item/Configure or Agent/Configure) submitting a crafted config.xml or agent configuration to the controller, which can escalate to code execution in the controller JVM. No public exploit identified at time of analysis for CVE-2026-117618. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 28, 2026
CVE-2026-117618 is one identifier in the Jenkins Security Advisory 2026-10-28 bundle, which fixes multiple Jenkins core vulnerabilities affecting Jenkins 2.587 and earlier and LTS 2.580.1 and earlier; the vendor-released patch is Jenkins 2.588 and LTS 2.580.2. The advisory excerpt available for this analysis enumerates SECURITY-4125/CVE-2026-117612 through SECURITY-4249/CVE-2026-117622 but does not include a description mapping SECURITY-4125 through SECURITY-4249 to the -117618 identifier, so the specific vulnerable component, attack vector, and required permissions for this CVE are unverified and must be read from the advisory page. No CISA KEV listing, no EPSS score, and no public exploit code were present in the supplied data, so exploitation status is no public exploit identified at time of analysis, and the vuln.today decision label remains awaiting_data. For the sibling issues in the same advisory, exploitation requires an authenticated foothold with configuration privileges (Overall/Read plus a non-anonymous account, Item/Configure, Agent/Configure, or Item/Create depending on the issue), and several of those siblings can lead to remote code execution on the controller.
RemediationAI
Vendor-released patch: upgrade Jenkins to 2.588 or Jenkins LTS 2.580.2, the releases named in the 2026-10-28 advisory as containing the fixes; confirm the exact SECURITY-41xx entry tied to CVE-2026-117618 on https://www.jenkins.io/security/advisory/2026-10-28/ before relying on that version as sufficient for this identifier specifically. For the sibling XStream hardening in 2.588/LTS 2.580.2, the advisory notes the release newly enforces the XStream type permissions system alongside the custom converters, and administrators who hit problems with it can disable it by setting the Java system property hudson.util.XStream2.SUPPRESS_TYPE_PERMISSION to true - trading the additional allowlist enforcement for compatibility. For the XSS issues in the same advisory (SECURITY-4225/CVE-2026-117613 and SECURITY-4232/CVE-2026-117621), the vendor states that enforcing Content Security Policy on Jenkins 2.539 or newer, LTS 2.541.1 or newer, mitigates the known impact; no such mitigation is documented for CVE-2026-117618 in the supplied data, so no compensating control can be recommended for it beyond updating.
Affected VersionsENISA
Affects your stack
Find out whether the stacks and servers you run are on an affected version.
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
Jenkins core persists configuration and build data through XStream serialization and deserialization, and hardens that surface with a custom deserialization filter (JEP-200) that permits only types defined in Jenkins core or plugins, or explicitly allowlisted types. The vulnerabilities bundled in the 2026-10-28 advisory center on that model: SECURITY-4125/CVE-2026-117612 shows the custom XStream converter failing to apply the filter to classes named by the resolves-to attribute, letting an attacker instantiate arbitrary types during deserialization; SECURITY-4225/CVE-2026-117613 concerns XStream not restricting collection element types, producing stored cross-site scripting via a crafted job config.xml for users with Item/Configure; SECURITY-4123/CVE-2026-117614 involves the compatibility conversion of legacy Command Agent Launcher commands without administrator approval; SECURITY-4187/CVE-2026-117615 covers symlink following when copying an item directory during rename; SECURITY-4188/CVE-2026-117616 covers an HTTP agent-loading endpoint that accepts an unvalidated agent name and can load any config.xml as an agent definition; SECURITY-4248/CVE-2026-117617 covers a time-of-check/time-of-use gap in symlink checking during artifact extraction. The root-cause class for CVE-2026-117618 specifically is not stated in the supplied sources - no CWE is given and the advisory text for that identifier is absent - so the trigger is not described in the available sources.
Know when Jenkins gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Description PRE-NVD
Executive ViewAI
CVE-2026-117618 is a critical-severity vulnerability in Jenkins automation server (versions 2.587 and earlier, and LTS 2.580.1 and earlier), part of a larger security advisory bundle. Jenkins is widely used for CI/CD pipelines, often with access to source code, build secrets, and deployment credentials, so a critical flaw there can expose the entire software supply chain. Leadership should care because unpatched Jenkins instances could allow attackers with some level of access to compromise build integrity or steal sensitive data, affecting development and operations teams across the organization.
Vendor-released patch: Jenkins 2.588 and LTS 2.580.2
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
Attack Technique
Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.
Denial of service against HTTP/2 server implementations allows remote unauthenticated attackers to exhaust server resour
A sandbox bypass vulnerability exists in Jenkins Pipeline: Groovy Plugin 2.63 and earlier in pom.xml, src/main/java/org/
The Jenkins CLI subsystem in Jenkins before 1.638 and LTS before 1.625.2 allows remote attackers to execute arbitrary co
The remoting module in Jenkins before 2.32 and LTS before 2.19.3 allows remote attackers to execute arbitrary code via a
Multiple unspecified API endpoints in Jenkins before 1.650 and LTS before 1.642.2 allow remote authenticated users to ex
The Fingerprints pages in Jenkins before 1.638 and LTS before 1.625.2 might allow remote attackers to obtain sensitive j
The remoting module in Jenkins before 1.650 and LTS before 1.642.2 allows remote attackers to execute arbitrary code by
A sandbox bypass vulnerability exists in Jenkins Script Security Plugin 1.53 and earlier in src/main/java/org/jenkinsci/
A code execution vulnerability exists in the Stapler web framework used by Jenkins 2.153 and earlier, LTS 2.138.3 and ea
A sandbox bypass vulnerability exists in Jenkins Script Security Plugin 1.50 and earlier in src/main/java/org/jenkinsci/
A sandbox bypass vulnerability exists in Pipeline: Declarative Plugin 1.3.3 and earlier in. Rated high severity (CVSS 8.
A sandbox bypass vulnerability exists in Pipeline: Groovy Plugin 2.61 and earlier in src/main/java/org/jenkinsci/plugins
EUVD-2026-112183
CVE.org
Exploit-DB