Skip to main content

Linksys RE6250 CVE-2026-114576

| EUVDEUVD-2026-107884 LOW
Use of Insufficiently Random Values (CWE-330)
2026-10-22 VulDB GHSA-w2w5-phf3-47jv
2.9
CVSS 4.0 · Vendor: VulDB
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Reach RE6250 web management interface
  2. Delivery
    Observe/collect session_id tokens
  3. Exploit
    Predict weak session_id value
  4. Execution
    Submit forged token to strcmp check
  5. Impact
    Access session-scoped management data

Vulnerability Assessment

Weakness
CWE
OWASP Top 10:2025
A04:2025 - Cryptographic Failures
ASVS 5.0
V11 - Cryptography Cryptographic random values
Exploitation Conditions

Exploitation requires network reachability to the RE6250 Web Management Interface and the ability to predict a session_id value that the server compares with strcmp; the root cause is session identifiers generated with insufficient entropy (CWE-330). No authentication is required (PR:N), but exploitation is materially LIMITED by high attack complexity (AC:H) - the attacker must successfully predict or reconstruct a non-random session token, which the CVE itself describes as 'rather high' complexity and 'difficult.' Impact is confined to confidentiality of session-scoped data on this specific firmware (1.0.04.001); there is no integrity or availability impact. Realistic risk is further bounded by the consumer-extender deployment context, where the management interface is not typically internet-exposed by default.

Impact

This is a medium-severity issue (CVSS 4.0 base 6.3) whose signals are internally consistent and point to limited real-world priority. The CVSS 4.0 vector (AV:N/AC:H/AT:N/PR:N/UI:N) describes a network-reachable, unauthenticated weakness but with HIGH attack complexity, and the description explicitly reinforces this: 'The complexity of an attack is rather high' and 'the exploitability is difficult.' The only impact is low confidentiality (VC:L; VI:N/VA:N), matching the CWE-330 insufficiently-random-values root cause - predictable session_id tokens enable session-related information disclosure, not code execution or integrity loss. Public exploit code exists (GitHub PoC referenced), and the CVSS carries E:P (Proof-of-Concept), so this is credible but not weaponized. There is NO CISA KEV listing and no EPSS score was provided in the input, so widespread automated exploitation cannot be asserted. Net assessment: a genuine but low-urgency flaw - the high complexity, confidentiality-only impact, and consumer-device target make it a far lower priority than its medium CVSS might suggest. The record was authored by VulDB (a researcher aggregator), not the vendor, so affected-version confirmation is single-sourced.

Exploit ScenarioDerived

A remote attacker on a network path to a Linksys RE6250's Web Management Interface observes or collects session_id values and, exploiting their insufficient randomness, predicts or reconstructs a valid session token that the server validates via strcmp. A public proof-of-concept exists, but the attack is rated difficult/high-complexity, so successful prediction likely requires favorable conditions or repeated attempts before the attacker can access session-scoped management data.

Monitor Track and reassess. Why: LOW severity (CVSS 0.1-3.9).
No patch listed yet 0.4% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 22, 2026

Predictable session identifiers in the Linksys RE6250 Web Management Interface (firmware 1.0.04.001) can expose session-scoped information because session_id values are generated with insufficient randomness and checked with strcmp. A remote, unauthenticated attacker could exploit this only by successfully predicting a valid token, a high-complexity condition; publicly available exploit code exists, and the impact is limited to low confidentiality with no integrity or availability effect (CVSS 4.0 base 6.3; assessed CVSS 3.1 C:L/I:N/A:N).

RemediationAI

No vendor-released patch identified at time of analysis, and the provided references do not specify a fixed firmware version; check Linksys support/vendor site (https://www.linksys.com/) and VulDB (https://vuldb.com/vuln/424944) for an updated RE6250 firmware before relying on the device. Until a fix is confirmed, disable remote/web management exposure and restrict the Web Management Interface to a trusted LAN segment via firewall rules or AP isolation; the trade-off is loss of remote administration and management from guest/VLAN clients. Change default administrative credentials and monitor for unexpected management sessions, though this does not remove the predictable session_id root cause. If the extender is not needed, power it off or replace it; this eliminates exposure but removes the extension function.

Affected VersionsENISA

RE6250 1.0.04.001

Affected Packages

euvd re6250 no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

The affected component is the RE6250's web-based management interface, which uses strcmp to validate a session_id parameter. CWE-330 (Use of Insufficiently Random Values) means the session token space is small or predictable enough that an attacker who can reach the management UI may infer an existing session identifier rather than mounting a brute-force or memory-corruption attack. The CPE cpe:2.3:a:linksys:re6250:*:*:*:*:*:*:*:* identifies the Linksys RE6250 product line, while the report ties the flaw specifically to firmware 1.0.04.001. The assessed vector (AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N) confirms remote reachability without authentication but requires substantial predictive effort and yields only read access to data associated with a guessed session. It is not described as a command-injection or memory-safety issue in the supplied data.

Know when Re6250 gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (VulDB) PRIMARY 2.9 MEDIUM
CVSS:4.0/AV:N/AC:H/AT:N/PR:N/UI:N/VC:L/VI:N/VA:N/SC:N/SI:N/SA:N/E:P
vuln.today AI 3.7 LOW

Network-reachable and unauthenticated (AV:N/PR:N) but predicting a weak session_id is non-trivial (AC:H); only session data confidentiality is affected, so C:L with I:N/A:N.

3.1 AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N
4.0 AV:N/AC:H/AT:N/PR:N/UI:N/VC:L/VI:N/VA:N/SC:N/SI:N/SA:N

Primary rating from Vendor (VulDB).

CVSS VectorVendor: VulDB

Attack Vector
Network
Attack Complexity
High
Attack Requirements
None
Privileges Required
None
User Interaction
None
Vulnerable system: Confidentiality
Low
Vulnerable system: Integrity
None
Vulnerable system: Availability
None
Subsequent system: Confidentiality
None
Subsequent system: Integrity
None
Subsequent system: Availability
None

Lifecycle Timeline

3
Severity Changed
Oct 22, 2026 - 02:38 NVD
MEDIUM LOW
CVSS changed
Oct 22, 2026 - 02:38 NVD
6.3 (MEDIUM) 2.9 (LOW)
CVE Published
Oct 22, 2026 - 01:30 cve.org
MEDIUM 6.3

DescriptionCVE.org

A vulnerability has been found in Linksys RE6250 1.0.04.001. This affects the function strcmp of the component Web Management Interface. The manipulation of the argument session_id leads to insufficiently random values. The attack may be initiated remotely. The complexity of an attack is rather high. It is indicated that the exploitability is difficult. The exploit has been disclosed to the public and may be used.

Threat Intelligence Overview

EPSS Score
0.4%
Top 66% exploitable
Prevalence
Low
specific consumer Wi-Fi range-extender model, no enterprise footprint
Exploit
POC
Public exploit code exists
Social Media
1
Sightings
Data Quality
6 sources
Confidence: High

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity LOW
CISA KEV No
Public POC Yes
EPSS 0.4%
Patch available No
Active threat No
Deciding rule
LOW severity (CVSS 0.1-3.9)
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision· derived
Scheduled
Exploitation· derived
Poc
System Exposure· derived
Open
Automatable· derived
No
Human Impact· derived
Low

Priority Score

34
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +14
PoC: +20
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy