Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessReach device /ubus endpoint over network
-
DeliverySend unauthenticated routerd.passwd_set request
-
ExploitReset/set admin password to attacker value
-
ExecutionAuthenticate to router admin panel
-
ImpactFull device and network control
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A07:2025 - Authentication Failures
ASVS 5.0
V6 - Authentication Password recovery security
|
| Exploitation Conditions | Exploitation requires network access to the device's /ubus management interface and the ability to invoke the routerd.passwd_set function; per PR:N/UI:N no authentication or user interaction is needed, so it works against default configurations reachable on the network. The primary practical limit is exposure: if /ubus is only reachable from the LAN (typical for consumer routers), the attacker must be on the local network or the management interface must be exposed to the WAN. Affected build is Netcore POWER13 2.0.240730.162638; no patch is available because the vendor did not respond to the disclosure. |
| Impact | The CVSS 4.0 vector (AV:N/AC:L/AT:N/PR:N/UI:N) describes a remote, low-complexity, unauthenticated attack with no user interaction - a broadly reachable flaw where the /ubus routerd.passwd_set endpoint can be invoked without credentials. The SSVC/temporal signal E:P (Proof-of-Concept) is corroborated by a public GitHub exploit write-up, so 'publicly available exploit code exists' - but this is NOT active exploitation: there is no CISA KEV listing and no EPSS score in the input, so real-world exploitation volume is unquantified. The vendor's 6.9 (Medium) score rests on uniformly LOW impacts (VC:L/VI:L/VA:L), which likely understates the outcome: CWE-640 (weak password recovery) via an unauthenticated password-reset on a router's admin plane typically yields full device takeover, which would justify HIGH impacts. This is a genuine priority for anyone running the affected device because the access barrier is essentially zero and working exploit code is published, even though the numeric CVSS sits in the Medium band. Note also the input tag 'Information Disclosure' conflicts with the CWE-640 password-reset nature (an integrity/authentication issue, not primarily disclosure) - the classification should be verified. |
| Exploit ScenarioDerived | An attacker on the network reaches the device's /ubus interface and issues a routerd.passwd_set call without authenticating, resetting or setting the router administrator password to a value they control. A public proof-of-concept write-up on GitHub documents the unauthenticated request, lowering the skill needed to reproduce it. Having captured the credential, the attacker logs into the admin panel and controls DNS, routing, and traffic for every device behind the router. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Sep 28, 2026
Unauthenticated remote attackers can invoke the routerd.passwd_set function exposed through the /ubus management interface on Netcore POWER13 (build 2.0.240730.162638) to reset or recover device credentials through a weak password-recovery mechanism (CWE-640). The CVSS 4.0 vector (AV:N/AC:L/AT:N/PR:N/UI:N) confirms the attack is remote, low complexity, and requires neither authentication nor user interaction, though practical exposure depends on whether /ubus is reachable from the LAN only or also from the WAN; impact is scored as limited across confidentiality, integrity, and availability. Publicly available exploit code exists - a detailed proof-of-concept write-up is published on GitHub - and the vendor was contacted but did not respond, so no vendor-released patch is identified at time of analysis. EPSS and KEV data were not provided; this is not confirmed as actively exploited.
RemediationAI
No vendor-released patch is identified at time of analysis, and Netcore did not respond to the disclosure, so remediation must rely on compensating controls: disable or firewall the /ubus management endpoint so it is unreachable from untrusted networks, and confirm the web management interface is not exposed on the WAN side - the trade-off is that legitimate local administration via ubus-based tooling will break unless access is scoped to specific trusted admin hosts. If /ubus must remain available, restrict it to a dedicated management VLAN or LAN segment with ACLs, since the attack requires network reachability to that endpoint (PR:N means an attacker on that segment needs no credentials). Because the flaw is a weak password-recovery mechanism, changing the device administrator password does not mitigate it - the recoverable handler still executes - so prioritize network isolation over credential rotation. Monitor router logs for unexpected POST requests to /ubus invoking routerd.passwd_set, and treat any unexplained admin-password change as compromise requiring factory reset and firmware re-evaluation. Continue tracking https://vuldb.com/vuln/411009 and the vendor channel for an eventual firmware fix; if one is released, apply it and re-check the device's ubus ACLs afterward.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The affected component is the routerd daemon on Netcore POWER13 routers, which exposes an OpenWrt-derived ubus (micro bus) RPC interface over HTTP at the /ubus endpoint. The specific RPC method routerd.passwd_set handles password set/reset operations, and its weak recovery logic falls under CWE-640, Weak Password Recovery Mechanism for Forgotten Password - the flow grants a credential change without adequate proof of identity or out-of-band verification. Because the ubus call is reachable without a session (PR:N) and no user interaction is required (UI:N), any host that can reach the /ubus endpoint on the router's management interface can attempt the reset. Note that the affected CPE (cpe:2.3:a:netcore:power13:*:*:*:*:*:*:*:*) is wildcarded, so the entire POWER13 line should be treated as potentially affected, with the disclosed build 2.0.240730.162638 verified. The provided CVSS 4.0 vector includes the E:P (proof-of-concept) exploit-maturity metric, consistent with the public GitHub advisory, but does not indicate active exploitation.
Know when Power13 gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:L/VI:L/VA:L/SC:L/SI:L/SA:L/E:P
Remote unauthenticated call to /ubus (AV:N/AC:L/PR:N/UI:N); impacts kept LOW to match the vendor and vague description, though an admin password reset plausibly warrants HIGH.
Primary rating from Vendor (VulDB).
CVSS VectorVendor: VulDB
Lifecycle Timeline
2DescriptionCVE.org
A security vulnerability has been detected in Netcore POWER13 2.0.240730.162638. This issue affects the function routerd.passwd_set of the file /ubus. Such manipulation leads to weak password recovery. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Information disclosure occurs when an application unintentionally exposes sensitive data that aids attackers in reconnaissance or directly compromises security.
EUVD-2026-88509
GHSA-fpr8-h6hw-956c
NVD
CVE.org
EPSS
Vulnrichment
VulDB
Exploit-DB