Linux Kernel

CVE-2022-50039 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

CVE-2022-50038 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

CVE-2022-50037 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

In the Linux kernel, the following vulnerability has been resolved: drm/sun4i: dsi: Prevent underflow when computing packet sizes Currently, the packet overhead is subtracted using unsigned arithmetic. With a short sync pulse, this could underflow and wrap around to near the maximal u16 value. Fix this by using signed subtraction. The call to max() will correctly handle any negative numbers that are produced. Apply the same fix to the other timings, even though those subtractions are less likely to underflow.

Use-after-free vulnerability in the Linux kernel's AMD GPU (amdgpu) driver that occurs when amdgpu_cs_vm_handling returns an error, causing the bo_list_mutex to be unlocked twice-once inside the function and again in amdgpu_cs_parser_fini. This leads to refcount underflow and potential memory corruption. The vulnerability affects unprivileged local users on systems with AMD GPUs and Linux kernel versions around 5.20, allowing denial of service and potential privilege escalation through memory corruption exploitation.

Use-after-free vulnerability in the Linux kernel's USB Cadence3 (cdns3) gadget driver where a pointer is dereferenced after being freed during request cleanup in the wa2_remove_old_request() function. This affects Linux kernel versions with the vulnerable cdns3 driver code path, allowing a local attacker with user privileges to potentially achieve arbitrary code execution or cause a denial of service. The vulnerability has a CVSS score of 7.8 (high severity) with local attack vector requiring low privileges; there is no indication of active exploitation in the wild or public POC as of the CVE publication.

CVE-2022-50033 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

CVE-2022-50032 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

A buffer overflow vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.

A remote code execution vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

CVE-2022-50028 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix possible memory leak when failing to issue CMF WQE There is no corresponding free routine if lpfc_sli4_issue_wqe fails to issue the CMF WQE in lpfc_issue_cmf_sync_wqe. If ret_val is non-zero, then free the iocbq request structure.

CVE-2022-50026 is an out-of-bounds shift vulnerability in the Linux kernel's habanalabs/gaudi driver that occurs when validating NIC queues due to improper offset calculation logic. The vulnerability affects Linux kernel versions with the habanalabs Gaudi accelerator driver and requires local access with limited privileges to exploit. An authenticated local attacker can trigger an out-of-bounds memory access leading to information disclosure (confidentiality impact) and potential denial of service (availability impact), with a CVSS score of 7.1 indicating high severity.

In the Linux kernel, the following vulnerability has been resolved: cxl: Fix a memory leak in an error handling path A bitmap_zalloc() must be balanced by a corresponding bitmap_free() in the error handling path of afu_allocate_irqs().

In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-axi-dmac: do not print NULL LLI during error During debugging we have seen an issue where axi_chan_dump_lli() is passed a NULL LLI pointer which ends up causing an OOPS due to trying to get fields from it. Simply print NULL LLI and exit to avoid this.

CVE-2022-50023 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

Use-after-free vulnerability in the Linux kernel's RAID5 MD driver where the function raid5_release_stripe() prematurely releases a stripe handle (sh) reference, but the code continues to dereference sh in subsequent conditional statements. This affects local attackers with unprivileged user privileges who can trigger the vulnerability through direct kernel interactions, potentially leading to denial of service, information disclosure, or local privilege escalation. The vulnerability is not currently listed as actively exploited (KEV status unknown from provided data), but the high CVSS score (7.8) and straightforward local attack vector indicate moderate real-world risk requiring prioritization for systems with untrusted local users.

Use-after-free vulnerability in the Linux kernel's ext4 filesystem that allows a local attacker with low privileges to cause a kernel panic (denial of service) and potentially achieve code execution. The vulnerability exists in ext4_mb_clear_bb() and ext4_free_blocks() functions where block ranges are validated before use but can be adjusted after validation on bigalloc filesystems, leading to out-of-bounds memory access on corrupted filesystems. While not actively exploited in the wild per KEV data, the vulnerability was discovered via syzkaller fuzzing and affects Linux kernel versions through 5.19.

CVE-2022-50020 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

CVE-2022-50019 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

CVE-2022-50017 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: cnl: Do not process IPC reply before firmware boot It is not yet clear, but it is possible to create a firmware so broken that it will send a reply message before a FW_READY message (it is not yet clear if FW_READY will arrive later). Since the reply_data is allocated only after the FW_READY message, this will lead to a NULL pointer dereference if not filtered out. The issue was reported with IPC4 firmware but the same condition is present for IPC3.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda-ipc: Do not process IPC reply before firmware boot It is not yet clear, but it is possible to create a firmware so broken that it will send a reply message before a FW_READY message (it is not yet clear if FW_READY will arrive later). Since the reply_data is allocated only after the FW_READY message, this will lead to a NULL pointer dereference if not filtered out. The issue was reported with IPC4 firmware but the same condition is present for IPC3.

A remote code execution vulnerability (CVSS 7.0). High severity vulnerability requiring prompt remediation. Vendor patch is available.

CVE-2022-50013 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

CVE-2022-50012 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

CVE-2022-50011 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: i740fb: Check the argument of i740_calc_vclk() Since the user can control the arguments of the ioctl() from the user space, under special arguments that may result in a divide-by-zero bug. If the user provides an improper 'pixclock' value that makes the argumet of i740_calc_vclk() less than 'I740_RFREQ_FIX', it will cause a divide-by-zero bug in: drivers/video/fbdev/i740fb.c:353 p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX))); The following log can reveal it: divide error: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:i740_calc_vclk drivers/video/fbdev/i740fb.c:353 [inline] RIP: 0010:i740fb_decode_var drivers/video/fbdev/i740fb.c:646 [inline] RIP: 0010:i740fb_set_par+0x163f/0x3b70 drivers/video/fbdev/i740fb.c:742 Call Trace: fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1034 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189 Fix this by checking the argument of i740_calc_vclk() first.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix null-ptr-deref in f2fs_get_dnode_of_data There is issue as follows when test f2fs atomic write: F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock F2FS-fs (loop0): invalid crc_offset: 0 F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=1, run fsck to fix. F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=2, run fsck to fix. ================================================================== BUG: KASAN: null-ptr-deref in f2fs_get_dnode_of_data+0xac/0x16d0 Read of size 8 at addr 0000000000000028 by task rep/1990 CPU: 4 PID: 1990 Comm: rep Not tainted 5.19.0-rc6-next-20220715 #266 Call Trace: <TASK> dump_stack_lvl+0x6e/0x91 print_report.cold+0x49a/0x6bb kasan_report+0xa8/0x130 f2fs_get_dnode_of_data+0xac/0x16d0 f2fs_do_write_data_page+0x2a5/0x1030 move_data_page+0x3c5/0xdf0 do_garbage_collect+0x2015/0x36c0 f2fs_gc+0x554/0x1d30 f2fs_balance_fs+0x7f5/0xda0 f2fs_write_single_data_page+0xb66/0xdc0 f2fs_write_cache_pages+0x716/0x1420 f2fs_write_data_pages+0x84f/0x9a0 do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x87/0xa0 file_write_and_wait_range+0x157/0x1c0 f2fs_do_sync_file+0x206/0x12d0 f2fs_sync_file+0x99/0xc0 vfs_fsync_range+0x75/0x140 f2fs_file_write_iter+0xd7b/0x1850 vfs_write+0x645/0x780 ksys_write+0xf1/0x1e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd As 3db1de0e582c commit changed atomic write way which new a cow_inode for atomic write file, and also mark cow_inode as FI_ATOMIC_FILE. When f2fs_do_write_data_page write cow_inode will use cow_inode's cow_inode which is NULL. Then will trigger null-ptr-deref. To solve above issue, introduce FI_COW_FILE flag for COW inode. Fiexes: 3db1de0e582c("f2fs: change the current atomic write way")

In the Linux kernel, the following vulnerability has been resolved: kprobes: don't call disarm_kprobe() for disabled kprobes The assumption in __disable_kprobe() is wrong, and it could try to disarm an already disarmed kprobe and fire the WARN_ONCE() below. [0] We can easily reproduce this issue. 1. Write 0 to /sys/kernel/debug/kprobes/enabled. # echo 0 > /sys/kernel/debug/kprobes/enabled 2. Run execsnoop. At this time, one kprobe is disabled. # /usr/share/bcc/tools/execsnoop & [1] 2460 PCOMM PID PPID RET ARGS # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 3. Write 1 to /sys/kernel/debug/kprobes/enabled, which changes kprobes_all_disarmed to false but does not arm the disabled kprobe. # echo 1 > /sys/kernel/debug/kprobes/enabled # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 4. Kill execsnoop, when __disable_kprobe() calls disarm_kprobe() for the disabled kprobe and hits the WARN_ONCE() in __disarm_kprobe_ftrace(). # fg /usr/share/bcc/tools/execsnoop ^C Actually, WARN_ONCE() is fired twice, and __unregister_kprobe_top() misses some cleanups and leaves the aggregated kprobe in the hash table. Then, __unregister_trace_kprobe() initialises tk->rp.kp.list and creates an infinite loop like this. aggregated kprobe.list -> kprobe.list -. ^ | '.__.' In this situation, these commands fall into the infinite loop and result in RCU stall or soft lockup. cat /sys/kernel/debug/kprobes/list : show_kprobe_addr() enters into the infinite loop with RCU. /usr/share/bcc/tools/execsnoop : warn_kprobe_rereg() holds kprobe_mutex, and __get_valid_kprobe() is stuck in the loop. To avoid the issue, make sure we don't call disarm_kprobe() for disabled kprobes. [0] Failed to disarm kprobe-ftrace at __x64_sys_execve+0x0/0x40 (error -2) WARNING: CPU: 6 PID: 2460 at kernel/kprobes.c:1130 __disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Modules linked in: ena CPU: 6 PID: 2460 Comm: execsnoop Not tainted 5.19.0+ #28 Hardware name: Amazon EC2 c5.2xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:__disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Code: 24 8b 02 eb c1 80 3d c4 83 f2 01 00 75 d4 48 8b 75 00 89 c2 48 c7 c7 90 fa 0f 92 89 04 24 c6 05 ab 83 01 e8 e4 94 f0 ff <0f> 0b 8b 04 24 eb b1 89 c6 48 c7 c7 60 fa 0f 92 89 04 24 e8 cc 94 RSP: 0018:ffff9e6ec154bd98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff930f7b00 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff921461c5 RDI: 00000000ffffffff RBP: ffff89c504286da8 R08: 0000000000000000 R09: c0000000fffeffff R10: 0000000000000000 R11: ffff9e6ec154bc28 R12: ffff89c502394e40 R13: ffff89c502394c00 R14: ffff9e6ec154bc00 R15: 0000000000000000 FS: 00007fe800398740(0000) GS:ffff89c812d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c00057f010 CR3: 0000000103b54006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> __disable_kprobe (kernel/kprobes.c:1716) disable_kprobe (kernel/kprobes.c:2392) __disable_trace_kprobe (kernel/trace/trace_kprobe.c:340) disable_trace_kprobe (kernel/trace/trace_kprobe.c:429) perf_trace_event_unreg.isra.2 (./include/linux/tracepoint.h:93 kernel/trace/trace_event_perf.c:168) perf_kprobe_destroy (kernel/trace/trace_event_perf.c:295) _free_event (kernel/events/core.c:4971) perf_event_release_kernel (kernel/events/core.c:5176) perf_release (kernel/events/core.c:5186) __fput (fs/file_table.c:321) task_work_run (./include/linux/ ---truncated---

CVE-2022-50007 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

CVE-2022-50006 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

Use-after-free vulnerability in the Linux kernel's NFC pn533 driver that occurs when a pn532 UART device is removed while a command timeout timer is still pending. An attacker with local access and low privileges can trigger a kernel crash or potentially achieve code execution by forcing device removal while timer callbacks are executing. This vulnerability affects Linux kernel versions with the vulnerable pn533 driver and has been patched; there is no evidence of active exploitation in the wild.

In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: fix metadata dst->dev xmit null pointer dereference When we try to transmit an skb with metadata_dst attached (i.e. dst->dev == NULL) through xfrm interface we can hit a null pointer dereference[1] in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a loopback skb device when there's no policy which dereferences dst->dev unconditionally. Not having dst->dev can be interepreted as it not being a loopback device, so just add a check for a null dst_orig->dev. With this fix xfrm interface's Tx error counters go up as usual. [1] net-next calltrace captured via netconsole: BUG: kernel NULL pointer dereference, address: 00000000000000c0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 7231 Comm: ping Kdump: loaded Not tainted 5.19.0+ #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 RIP: 0010:xfrm_lookup_with_ifid+0x5eb/0xa60 Code: 8d 74 24 38 e8 26 a4 37 00 48 89 c1 e9 12 fc ff ff 49 63 ed 41 83 fd be 0f 85 be 01 00 00 41 be ff ff ff ff 45 31 ed 48 8b 03 <f6> 80 c0 00 00 00 08 75 0f 41 80 bc 24 19 0d 00 00 01 0f 84 1e 02 RSP: 0018:ffffb0db82c679f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffd0db7fcad430 RCX: ffffb0db82c67a10 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0db82c67a80 RBP: ffffb0db82c67a80 R08: ffffb0db82c67a14 R09: 0000000000000000 R10: 0000000000000000 R11: ffff8fa449667dc8 R12: ffffffff966db880 R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 FS: 00007ff35c83f000(0000) GS:ffff8fa478480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 000000001ebb7000 CR4: 0000000000350ee0 Call Trace: <TASK> xfrmi_xmit+0xde/0x460 ? tcf_bpf_act+0x13d/0x2a0 dev_hard_start_xmit+0x72/0x1e0 __dev_queue_xmit+0x251/0xd30 ip_finish_output2+0x140/0x550 ip_push_pending_frames+0x56/0x80 raw_sendmsg+0x663/0x10a0 ? try_charge_memcg+0x3fd/0x7a0 ? __mod_memcg_lruvec_state+0x93/0x110 ? sock_sendmsg+0x30/0x40 sock_sendmsg+0x30/0x40 __sys_sendto+0xeb/0x130 ? handle_mm_fault+0xae/0x280 ? do_user_addr_fault+0x1e7/0x680 ? kvm_read_and_reset_apf_flags+0x3b/0x50 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7ff35cac1366 Code: eb 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89 RSP: 002b:00007fff738e4028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fff738e57b0 RCX: 00007ff35cac1366 RDX: 0000000000000040 RSI: 0000557164e4b450 RDI: 0000000000000003 RBP: 0000557164e4b450 R08: 00007fff738e7a2c R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 R13: 00007fff738e5770 R14: 00007fff738e4030 R15: 0000001d00000001 </TASK> Modules linked in: netconsole veth br_netfilter bridge bonding virtio_net [last unloaded: netconsole] CR2: 00000000000000c0

In the Linux kernel, the following vulnerability has been resolved: ice: xsk: prohibit usage of non-balanced queue id Fix the following scenario: 1. ethtool -L $IFACE rx 8 tx 96 2. xdpsock -q 10 -t -z Above refers to a case where user would like to attach XSK socket in txonly mode at a queue id that does not have a corresponding Rx queue. At this moment ice's XSK logic is tightly bound to act on a "queue pair", e.g. both Tx and Rx queues at a given queue id are disabled/enabled and both of them will get XSK pool assigned, which is broken for the presented queue configuration. This results in the splat included at the bottom, which is basically an OOB access to Rx ring array. To fix this, allow using the ids only in scope of "combined" queues reported by ethtool. However, logic should be rewritten to allow such configurations later on, which would end up as a complete rewrite of the control path, so let us go with this temporary fix. [420160.558008] BUG: kernel NULL pointer dereference, address: 0000000000000082 [420160.566359] #PF: supervisor read access in kernel mode [420160.572657] #PF: error_code(0x0000) - not-present page [420160.579002] PGD 0 P4D 0 [420160.582756] Oops: 0000 [#1] PREEMPT SMP NOPTI [420160.588396] CPU: 10 PID: 21232 Comm: xdpsock Tainted: G OE 5.19.0-rc7+ #10 [420160.597893] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [420160.609894] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420160.616968] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420160.639421] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420160.646650] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420160.655893] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420160.665166] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420160.674493] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420160.683833] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420160.693211] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420160.703645] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420160.711783] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420160.721399] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420160.731045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420160.740707] PKRU: 55555554 [420160.745960] Call Trace: [420160.750962] <TASK> [420160.755597] ? kmalloc_large_node+0x79/0x90 [420160.762703] ? __kmalloc_node+0x3f5/0x4b0 [420160.769341] xp_assign_dev+0xfd/0x210 [420160.775661] ? shmem_file_read_iter+0x29a/0x420 [420160.782896] xsk_bind+0x152/0x490 [420160.788943] __sys_bind+0xd0/0x100 [420160.795097] ? exit_to_user_mode_prepare+0x20/0x120 [420160.802801] __x64_sys_bind+0x16/0x20 [420160.809298] do_syscall_64+0x38/0x90 [420160.815741] entry_SYSCALL_64_after_hwframe+0x63/0xcd [420160.823731] RIP: 0033:0x7fa86a0dd2fb [420160.830264] Code: c3 66 0f 1f 44 00 00 48 8b 15 69 8b 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bc 0f 1f 44 00 00 f3 0f 1e fa b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 8b 0c 00 f7 d8 64 89 01 48 [420160.855410] RSP: 002b:00007ffc1146f618 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 [420160.866366] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa86a0dd2fb [420160.876957] RDX: 0000000000000010 RSI: 00007ffc1146f680 RDI: 0000000000000003 [420160.887604] RBP: 000055d7113a0520 R08: 00007fa868fb8000 R09: 0000000080000000 [420160.898293] R10: 0000000000008001 R11: 0000000000000246 R12: 000055d7113a04e0 [420160.909038] R13: 000055d7113a0320 R14: 000000000000000a R15: 0000000000000000 [420160.919817] </TASK> [420160.925659] Modules linked in: ice(OE) af_packet binfmt_misc ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: LAG, fix logic over MLX5_LAG_FLAG_NDEVS_READY Only set MLX5_LAG_FLAG_NDEVS_READY if both netdevices are registered. Doing so guarantees that both ldev->pf[MLX5_LAG_P0].dev and ldev->pf[MLX5_LAG_P1].dev have valid pointers when MLX5_LAG_FLAG_NDEVS_READY is set. The core issue is asymmetry in setting MLX5_LAG_FLAG_NDEVS_READY and clearing it. Setting it is done wrongly when both ldev->pf[MLX5_LAG_P0].dev and ldev->pf[MLX5_LAG_P1].dev are set; clearing it is done right when either of ldev->pf[i].netdev is cleared. Consider the following scenario: 1. PF0 loads and sets ldev->pf[MLX5_LAG_P0].dev to a valid pointer 2. PF1 loads and sets both ldev->pf[MLX5_LAG_P1].dev and ldev->pf[MLX5_LAG_P1].netdev with valid pointers. This results in MLX5_LAG_FLAG_NDEVS_READY is set. 3. PF0 is unloaded before setting dev->pf[MLX5_LAG_P0].netdev. MLX5_LAG_FLAG_NDEVS_READY remains set. Further execution of mlx5_do_bond() will result in null pointer dereference when calling mlx5_lag_is_multipath() This patch fixes the following call trace actually encountered: [ 1293.475195] BUG: kernel NULL pointer dereference, address: 00000000000009a8 [ 1293.478756] #PF: supervisor read access in kernel mode [ 1293.481320] #PF: error_code(0x0000) - not-present page [ 1293.483686] PGD 0 P4D 0 [ 1293.484434] Oops: 0000 [#1] SMP PTI [ 1293.485377] CPU: 1 PID: 23690 Comm: kworker/u16:2 Not tainted 5.18.0-rc5_for_upstream_min_debug_2022_05_05_10_13 #1 [ 1293.488039] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 1293.490836] Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] [ 1293.492448] RIP: 0010:mlx5_lag_is_multipath+0x5/0x50 [mlx5_core] [ 1293.494044] Code: e8 70 40 ff e0 48 8b 14 24 48 83 05 5c 1a 1b 00 01 e9 19 ff ff ff 48 83 05 47 1a 1b 00 01 eb d7 0f 1f 44 00 00 0f 1f 44 00 00 <48> 8b 87 a8 09 00 00 48 85 c0 74 26 48 83 05 a7 1b 1b 00 01 41 b8 [ 1293.498673] RSP: 0018:ffff88811b2fbe40 EFLAGS: 00010202 [ 1293.500152] RAX: ffff88818a94e1c0 RBX: ffff888165eca6c0 RCX: 0000000000000000 [ 1293.501841] RDX: 0000000000000001 RSI: ffff88818a94e1c0 RDI: 0000000000000000 [ 1293.503585] RBP: 0000000000000000 R08: ffff888119886740 R09: ffff888165eca73c [ 1293.505286] R10: 0000000000000018 R11: 0000000000000018 R12: ffff88818a94e1c0 [ 1293.506979] R13: ffff888112729800 R14: 0000000000000000 R15: ffff888112729858 [ 1293.508753] FS: 0000000000000000(0000) GS:ffff88852cc40000(0000) knlGS:0000000000000000 [ 1293.510782] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1293.512265] CR2: 00000000000009a8 CR3: 00000001032d4002 CR4: 0000000000370ea0 [ 1293.514001] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1293.515806] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_tproxy: restrict to prerouting hook TPROXY is only allowed from prerouting, but nft_tproxy doesn't check this. This fixes a crash (null dereference) when using tproxy from e.g. output.

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: fix stuck flows on cleanup due to pending work To clear the flow table on flow table free, the following sequence normally happens in order: 1) gc_step work is stopped to disable any further stats/del requests. 2) All flow table entries are set to teardown state. 3) Run gc_step which will queue HW del work for each flow table entry. 4) Waiting for the above del work to finish (flush). 5) Run gc_step again, deleting all entries from the flow table. 6) Flow table is freed. But if a flow table entry already has pending HW stats or HW add work step 3 will not queue HW del work (it will be skipped), step 4 will wait for the pending add/stats to finish, and step 5 will queue HW del work which might execute after freeing of the flow table. To fix the above, this patch flushes the pending work, then it sets the teardown flag to all flows in the flowtable and it forces a garbage collector run to queue work to remove the flows from hardware, then it flushes this new pending work and (finally) it forces another garbage collector run to remove the entry from the software flowtable. Stack trace: [47773.882335] BUG: KASAN: use-after-free in down_read+0x99/0x460 [47773.883634] Write of size 8 at addr ffff888103b45aa8 by task kworker/u20:6/543704 [47773.885634] CPU: 3 PID: 543704 Comm: kworker/u20:6 Not tainted 5.12.0-rc7+ #2 [47773.886745] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) [47773.888438] Workqueue: nf_ft_offload_del flow_offload_work_handler [nf_flow_table] [47773.889727] Call Trace: [47773.890214] dump_stack+0xbb/0x107 [47773.890818] print_address_description.constprop.0+0x18/0x140 [47773.892990] kasan_report.cold+0x7c/0xd8 [47773.894459] kasan_check_range+0x145/0x1a0 [47773.895174] down_read+0x99/0x460 [47773.899706] nf_flow_offload_tuple+0x24f/0x3c0 [nf_flow_table] [47773.907137] flow_offload_work_handler+0x72d/0xbe0 [nf_flow_table] [47773.913372] process_one_work+0x8ac/0x14e0 [47773.921325] [47773.921325] Allocated by task 592159: [47773.922031] kasan_save_stack+0x1b/0x40 [47773.922730] __kasan_kmalloc+0x7a/0x90 [47773.923411] tcf_ct_flow_table_get+0x3cb/0x1230 [act_ct] [47773.924363] tcf_ct_init+0x71c/0x1156 [act_ct] [47773.925207] tcf_action_init_1+0x45b/0x700 [47773.925987] tcf_action_init+0x453/0x6b0 [47773.926692] tcf_exts_validate+0x3d0/0x600 [47773.927419] fl_change+0x757/0x4a51 [cls_flower] [47773.928227] tc_new_tfilter+0x89a/0x2070 [47773.936652] [47773.936652] Freed by task 543704: [47773.937303] kasan_save_stack+0x1b/0x40 [47773.938039] kasan_set_track+0x1c/0x30 [47773.938731] kasan_set_free_info+0x20/0x30 [47773.939467] __kasan_slab_free+0xe7/0x120 [47773.940194] slab_free_freelist_hook+0x86/0x190 [47773.941038] kfree+0xce/0x3a0 [47773.941644] tcf_ct_flow_table_cleanup_work Original patch description and stack trace by Paul Blakey.

CVE-2022-49999 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix locking in rxrpc's sendmsg Fix three bugs in the rxrpc's sendmsg implementation: (1) rxrpc_new_client_call() should release the socket lock when returning an error from rxrpc_get_call_slot(). (2) rxrpc_wait_for_tx_window_intr() will return without the call mutex held in the event that we're interrupted by a signal whilst waiting for tx space on the socket or relocking the call mutex afterwards. Fix this by: (a) moving the unlock/lock of the call mutex up to rxrpc_send_data() such that the lock is not held around all of rxrpc_wait_for_tx_window*() and (b) indicating to higher callers whether we're return with the lock dropped. Note that this means recvmsg() will not block on this call whilst we're waiting. (3) After dropping and regaining the call mutex, rxrpc_send_data() needs to go and recheck the state of the tx_pending buffer and the tx_total_len check in case we raced with another sendmsg() on the same call. Thinking on this some more, it might make sense to have different locks for sendmsg() and recvmsg(). There's probably no need to make recvmsg() wait for sendmsg(). It does mean that recvmsg() can return MSG_EOR indicating that a call is dead before a sendmsg() to that call returns - but that can currently happen anyway. Without fix (2), something like the following can be induced: WARNING: bad unlock balance detected! 5.16.0-rc6-syzkaller #0 Not tainted ------------------------------------- syz-executor011/3597 is trying to release lock (&call->user_mutex) at: [<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 but there are no more locks to release! other info that might help us debug this: no locks held by syz-executor011/3597. ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline] __lock_release kernel/locking/lockdep.c:5306 [inline] lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657 __mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900 rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae [Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this]

In the Linux kernel, the following vulnerability has been resolved: net: lantiq_xrx200: restore buffer if memory allocation failed In a situation where memory allocation fails, an invalid buffer address is stored. When this descriptor is used again, the system panics in the build_skb() function when accessing memory.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix possible memory leak in btrfs_get_dev_args_from_path() In btrfs_get_dev_args_from_path(), btrfs_get_bdev_and_sb() can fail if the path is invalid. In this case, btrfs_get_dev_args_from_path() returns directly without freeing args->uuid and args->fsid allocated before, which causes memory leak. To fix these possible leaks, when btrfs_get_bdev_and_sb() fails, btrfs_put_dev_args_from_path() is called to clean up the memory.

CVE-2022-49995 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.

In the Linux kernel, the following vulnerability has been resolved: bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem The vmemmap pages is marked by kmemleak when allocated from memblock. Remove it from kmemleak when freeing the page. Otherwise, when we reuse the page, kmemleak may report such an error and then stop working. kmemleak: Cannot insert 0xffff98fb6eab3d40 into the object search tree (overlaps existing) kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xffff98fb6be00000 (size 335544320): kmemleak: comm "swapper", pid 0, jiffies 4294892296 kmemleak: min_count = 0 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace:

CVE-2022-49993 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

CVE-2022-49992 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

CVE-2022-49991 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

Double-free vulnerability in the Linux kernel's s390 architecture implementation that occurs when fork() fails after task duplication but before thread initialization. A local, unprivileged attacker can trigger this memory corruption vulnerability through syscall fuzzing or crafted fork operations, potentially achieving local privilege escalation or denial of service. The vulnerability affects s390x systems and has been demonstrated to cause kernel panics via trinity fuzzing tests.

In the Linux kernel, the following vulnerability has been resolved: xen/privcmd: fix error exit of privcmd_ioctl_dm_op() The error exit of privcmd_ioctl_dm_op() is calling unlock_pages() potentially with pages being NULL, leading to a NULL dereference. Additionally lock_pages() doesn't check for pin_user_pages_fast() having been completely successful, resulting in potentially not locking all pages into memory. This could result in sporadic failures when using the related memory in user mode. Fix all of that by calling unlock_pages() always with the real number of pinned pages, which will be zero in case pages being NULL, and by checking the number of pages pinned by pin_user_pages_fast() matching the expected number of pages.

CVE-2022-49987 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Remove WQ_MEM_RECLAIM from storvsc_error_wq storvsc_error_wq workqueue should not be marked as WQ_MEM_RECLAIM as it doesn't need to make forward progress under memory pressure. Marking this workqueue as WQ_MEM_RECLAIM may cause deadlock while flushing a non-WQ_MEM_RECLAIM workqueue. In the current state it causes the following warning: [ 14.506347] ------------[ cut here ]------------ [ 14.506354] workqueue: WQ_MEM_RECLAIM storvsc_error_wq_0:storvsc_remove_lun is flushing !WQ_MEM_RECLAIM events_freezable_power_:disk_events_workfn [ 14.506360] WARNING: CPU: 0 PID: 8 at <-snip->kernel/workqueue.c:2623 check_flush_dependency+0xb5/0x130 [ 14.506390] CPU: 0 PID: 8 Comm: kworker/u4:0 Not tainted 5.4.0-1086-azure #91~18.04.1-Ubuntu [ 14.506391] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022 [ 14.506393] Workqueue: storvsc_error_wq_0 storvsc_remove_lun [ 14.506395] RIP: 0010:check_flush_dependency+0xb5/0x130 <-snip-> [ 14.506408] Call Trace: [ 14.506412] __flush_work+0xf1/0x1c0 [ 14.506414] __cancel_work_timer+0x12f/0x1b0 [ 14.506417] ? kernfs_put+0xf0/0x190 [ 14.506418] cancel_delayed_work_sync+0x13/0x20 [ 14.506420] disk_block_events+0x78/0x80 [ 14.506421] del_gendisk+0x3d/0x2f0 [ 14.506423] sr_remove+0x28/0x70 [ 14.506427] device_release_driver_internal+0xef/0x1c0 [ 14.506428] device_release_driver+0x12/0x20 [ 14.506429] bus_remove_device+0xe1/0x150 [ 14.506431] device_del+0x167/0x380 [ 14.506432] __scsi_remove_device+0x11d/0x150 [ 14.506433] scsi_remove_device+0x26/0x40 [ 14.506434] storvsc_remove_lun+0x40/0x60 [ 14.506436] process_one_work+0x209/0x400 [ 14.506437] worker_thread+0x34/0x400 [ 14.506439] kthread+0x121/0x140 [ 14.506440] ? process_one_work+0x400/0x400 [ 14.506441] ? kthread_park+0x90/0x90 [ 14.506443] ret_from_fork+0x35/0x40 [ 14.506445] ---[ end trace 2d9633159fdc6ee7 ]---

Heap buffer overflow vulnerability in the Linux kernel's BPF JIT compiler that allows a local, unprivileged user to read out-of-bounds memory and cause a denial of service. The vulnerability stems from improper range checking of array indices using imprecise tnum (tristate number) representations instead of concrete scalar values, enabling potential information disclosure and crash of the kernel. This affects Linux kernel versions prior to the fix and requires local access with unprivileged user privileges to exploit.

In the Linux kernel, the following vulnerability has been resolved: HID: steam: Prevent NULL pointer dereference in steam_{recv,send}_report It is possible for a malicious device to forgo submitting a Feature Report. The HID Steam driver presently makes no prevision for this and de-references the 'struct hid_report' pointer obtained from the HID devices without first checking its validity. Let's change that.

CVE-2022-49983 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix memory leak in pvr_probe The error handling code in pvr2_hdw_create forgets to unregister the v4l2 device. When pvr2_hdw_create returns back to pvr2_context_create, it calls pvr2_context_destroy to destroy context, but mp->hdw is NULL, which leads to that pvr2_hdw_destroy directly returns. Fix this by adding v4l2_device_unregister to decrease the refcount of usb interface.

In the Linux kernel, the following vulnerability has been resolved: HID: hidraw: fix memory leak in hidraw_release() Free the buffered reports before deleting the list entry. BUG: memory leak unreferenced object 0xffff88810e72f180 (size 32): comm "softirq", pid 0, jiffies 4294945143 (age 16.080s) hex dump (first 32 bytes): 64 f3 c6 6a d1 88 07 04 00 00 00 00 00 00 00 00 d..j............ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff814ac6c3>] kmemdup+0x23/0x50 mm/util.c:128 [<ffffffff8357c1d2>] kmemdup include/linux/fortify-string.h:440 [inline] [<ffffffff8357c1d2>] hidraw_report_event+0xa2/0x150 drivers/hid/hidraw.c:521 [<ffffffff8356ddad>] hid_report_raw_event+0x27d/0x740 drivers/hid/hid-core.c:1992 [<ffffffff8356e41e>] hid_input_report+0x1ae/0x270 drivers/hid/hid-core.c:2065 [<ffffffff835f0d3f>] hid_irq_in+0x1ff/0x250 drivers/hid/usbhid/hid-core.c:284 [<ffffffff82d3c7f9>] __usb_hcd_giveback_urb+0xf9/0x230 drivers/usb/core/hcd.c:1670 [<ffffffff82d3cc26>] usb_hcd_giveback_urb+0x1b6/0x1d0 drivers/usb/core/hcd.c:1747 [<ffffffff82ef1e14>] dummy_timer+0x8e4/0x14c0 drivers/usb/gadget/udc/dummy_hcd.c:1988 [<ffffffff812f50a8>] call_timer_fn+0x38/0x200 kernel/time/timer.c:1474 [<ffffffff812f5586>] expire_timers kernel/time/timer.c:1519 [inline] [<ffffffff812f5586>] __run_timers.part.0+0x316/0x430 kernel/time/timer.c:1790 [<ffffffff812f56e4>] __run_timers kernel/time/timer.c:1768 [inline] [<ffffffff812f56e4>] run_timer_softirq+0x44/0x90 kernel/time/timer.c:1803 [<ffffffff848000e6>] __do_softirq+0xe6/0x2ea kernel/softirq.c:571 [<ffffffff81246db0>] invoke_softirq kernel/softirq.c:445 [inline] [<ffffffff81246db0>] __irq_exit_rcu kernel/softirq.c:650 [inline] [<ffffffff81246db0>] irq_exit_rcu+0xc0/0x110 kernel/softirq.c:662 [<ffffffff84574f02>] sysvec_apic_timer_interrupt+0xa2/0xd0 arch/x86/kernel/apic/apic.c:1106 [<ffffffff84600c8b>] asm_sysvec_apic_timer_interrupt+0x1b/0x20 arch/x86/include/asm/idtentry.h:649 [<ffffffff8458a070>] native_safe_halt arch/x86/include/asm/irqflags.h:51 [inline] [<ffffffff8458a070>] arch_safe_halt arch/x86/include/asm/irqflags.h:89 [inline] [<ffffffff8458a070>] acpi_safe_halt drivers/acpi/processor_idle.c:111 [inline] [<ffffffff8458a070>] acpi_idle_do_entry+0xc0/0xd0 drivers/acpi/processor_idle.c:554

Use-after-free vulnerability in the Linux kernel's USB gadget subsystem (drivers/usb/gadget/udc/core.c) that occurs when the usb_udc_uevent() function races with gadget driver unregistration. An attacker with local access and unprivileged user privileges can trigger a crash or potential information disclosure by exploiting the missing mutex protection around driver pointer dereferences. The vulnerability affects Linux kernel versions prior to the fix being merged, with CVSS 7.8 severity and confirmed exploitability via syzbot fuzzing.

CVE-2022-49979 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

In the Linux kernel, the following vulnerability has been resolved: fbdev: fb_pm2fb: Avoid potential divide by zero error In `do_fb_ioctl()` of fbmem.c, if cmd is FBIOPUT_VSCREENINFO, var will be copied from user, then go through `fb_set_var()` and `info->fbops->fb_check_var()` which could may be `pm2fb_check_var()`. Along the path, `var->pixclock` won't be modified. This function checks whether reciprocal of `var->pixclock` is too high. If `var->pixclock` is zero, there will be a divide by zero error. So, it is necessary to check whether denominator is zero to avoid crash. As this bug is found by Syzkaller, logs are listed below. divide error in pm2fb_check_var Call Trace: <TASK> fb_set_var+0x367/0xeb0 drivers/video/fbdev/core/fbmem.c:1015 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead ftrace_startup does not remove ops from ftrace_ops_list when ftrace_startup_enable fails: register_ftrace_function ftrace_startup __register_ftrace_function ... add_ftrace_ops(&ftrace_ops_list, ops) ... ... ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1 ... return 0 // ops is in the ftrace_ops_list. When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything: unregister_ftrace_function ftrace_shutdown if (unlikely(ftrace_disabled)) return -ENODEV; // return here, __unregister_ftrace_function is not executed, // as a result, ops is still in the ftrace_ops_list __unregister_ftrace_function ... If ops is dynamically allocated, it will be free later, in this case, is_ftrace_trampoline accesses NULL pointer: is_ftrace_trampoline ftrace_ops_trampoline do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL! Syzkaller reports as follows: [ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b [ 1203.508039] #PF: supervisor read access in kernel mode [ 1203.508798] #PF: error_code(0x0000) - not-present page [ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0 [ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI [ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G B W 5.10.0 #8 [ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0 [ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00 [ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246 [ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866 [ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b [ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07 [ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399 [ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008 [ 1203.525634] FS: 00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000 [ 1203.526801] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0 [ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Therefore, when ftrace_startup_enable fails, we need to rollback registration process and remove ops from ftrace_ops_list.

CVE-2022-49976 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

Privilege escalation vulnerability in the Linux kernel's eBPF (Berkeley Packet Filter) subsystem where a locally authenticated attacker can craft malicious BPF programs that redirect packets with invalid packet lengths, causing kernel memory corruption and potential denial of service or privilege escalation. The vulnerability affects Linux kernel versions prior to the fix commit and requires local access with unprivileged user privileges to exploit. This is not currently listed as actively exploited in CISA KEV, but the high CVSS score (7.8) and local attack vector with low complexity make it a priority for systems running vulnerable kernels.

In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: fix rumble worker null pointer deref We can dereference a null pointer trying to queue work to a destroyed workqueue. If the device is disconnected, nintendo_hid_remove is called, in which the rumble_queue is destroyed. Avoid using that queue to defer rumble work once the controller state is set to JOYCON_CTLR_STATE_REMOVED. This eliminates the null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: skmsg: Fix wrong last sg check in sk_msg_recvmsg() Fix one kernel NULL pointer dereference as below: [ 224.462334] Call Trace: [ 224.462394] __tcp_bpf_recvmsg+0xd3/0x380 [ 224.462441] ? sock_has_perm+0x78/0xa0 [ 224.462463] tcp_bpf_recvmsg+0x12e/0x220 [ 224.462494] inet_recvmsg+0x5b/0xd0 [ 224.462534] __sys_recvfrom+0xc8/0x130 [ 224.462574] ? syscall_trace_enter+0x1df/0x2e0 [ 224.462606] ? __do_page_fault+0x2de/0x500 [ 224.462635] __x64_sys_recvfrom+0x24/0x30 [ 224.462660] do_syscall_64+0x5d/0x1d0 [ 224.462709] entry_SYSCALL_64_after_hwframe+0x65/0xca In commit 9974d37ea75f ("skmsg: Fix invalid last sg check in sk_msg_recvmsg()"), we change last sg check to sg_is_last(), but in sockmap redirection case (without stream_parser/stream_verdict/ skb_verdict), we did not mark the end of the scatterlist. Check the sk_msg_alloc, sk_msg_page_add, and bpf_msg_push_data functions, they all do not mark the end of sg. They are expected to use sg.end for end judgment. So the judgment of '(i != msg_rx->sg.end)' is added back here.

CVE-2022-49972 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Fix a potential gpu_metrics_table memory leak Memory is allocated for gpu_metrics_table in smu_v13_0_4_init_smc_tables(), but not freed in smu_v13_0_4_fini_smc_tables(). This may cause memory leaks, fix it.

Kernel BUG in the Linux kernel's BPF cgroup subsystem that can be triggered via a memory allocation failure during BPF program detachment, causing a denial of service (kernel panic). Local unprivileged users with BPF capabilities can trigger this by exploiting a race condition between program attachment/detachment and memory pressure, resulting in high availability impact with potential information disclosure. The vulnerability affects Linux kernel versions before the fix was merged (approximately 5.19.0+).

Privilege escalation vulnerability in the Linux kernel's AMD display driver (drm/amd/display) where an OPTC underflow bit persists after ODM clock shutdown, preventing proper clearing of the underflow condition. A local authenticated attacker with low privileges can exploit this to achieve high-impact denial of service or potential kernel memory corruption. The vulnerability affects multiple Linux kernel versions and is not known to be actively exploited in the wild, though the high CVSS score (7.8) indicates significant local system compromise potential.

In the Linux kernel, the following vulnerability has been resolved: ieee802154/adf7242: defer destroy_workqueue call There is a possible race condition (use-after-free) like below (FREE) | (USE) adf7242_remove | adf7242_channel cancel_delayed_work_sync | destroy_workqueue (1) | adf7242_cmd_rx | mod_delayed_work (2) | The root cause for this race is that the upper layer (ieee802154) is unaware of this detaching event and the function adf7242_channel can be called without any checks. To fix this, we can add a flag write at the beginning of adf7242_remove and add flag check in adf7242_channel. Or we can just defer the destructive operation like other commit 3e0588c291d6 ("hamradio: defer ax25 kfree after unregister_netdev") which let the ieee802154_unregister_hw() to handle the synchronization. This patch takes the second option. runs")

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a data-race around bpf_jit_limit. While reading bpf_jit_limit, it can be changed concurrently via sysctl, WRITE_ONCE() in __do_proc_doulongvec_minmax(). The size of bpf_jit_limit is long, so we need to add a paired READ_ONCE() to avoid load-tearing.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: add missing ->fini_microcode interface for Sienna Cichlid To avoid any potential memory leak.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: add missing ->fini_xxxx interfaces for some SMU13 asics Without these, potential memory leak may be induced.

CVE-2022-49964 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

CVE-2022-49963 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

In the Linux kernel, the following vulnerability has been resolved: xhci: Fix null pointer dereference in remove if xHC has only one roothub The remove path in xhci platform driver tries to remove and put both main and shared hcds even if only a main hcd exists (one roothub) This causes a null pointer dereference in reboot for those controllers. Check that the shared_hcd exists before trying to remove it.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: fix null pointer dereference Asus chromebook CX550 crashes during boot on v5.17-rc1 kernel. The root cause is null pointer defeference of bi_next in tgl_get_bw_info() in drivers/gpu/drm/i915/display/intel_bw.c. BUG: kernel NULL pointer dereference, address: 000000000000002e PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 1 Comm: swapper/0 Tainted: G U 5.17.0-rc1 Hardware name: Google Delbin/Delbin, BIOS Google_Delbin.13672.156.3 05/14/2021 RIP: 0010:tgl_get_bw_info+0x2de/0x510 ... [ 2.554467] Call Trace: [ 2.554467] <TASK> [ 2.554467] intel_bw_init_hw+0x14a/0x434 [ 2.554467] ? _printk+0x59/0x73 [ 2.554467] ? _dev_err+0x77/0x91 [ 2.554467] i915_driver_hw_probe+0x329/0x33e [ 2.554467] i915_driver_probe+0x4c8/0x638 [ 2.554467] i915_pci_probe+0xf8/0x14e [ 2.554467] ? _raw_spin_unlock_irqrestore+0x12/0x2c [ 2.554467] pci_device_probe+0xaa/0x142 [ 2.554467] really_probe+0x13f/0x2f4 [ 2.554467] __driver_probe_device+0x9e/0xd3 [ 2.554467] driver_probe_device+0x24/0x7c [ 2.554467] __driver_attach+0xba/0xcf [ 2.554467] ? driver_attach+0x1f/0x1f [ 2.554467] bus_for_each_dev+0x8c/0xc0 [ 2.554467] bus_add_driver+0x11b/0x1f7 [ 2.554467] driver_register+0x60/0xea [ 2.554467] ? mipi_dsi_bus_init+0x16/0x16 [ 2.554467] i915_init+0x2c/0xb9 [ 2.554467] ? mipi_dsi_bus_init+0x16/0x16 [ 2.554467] do_one_initcall+0x12e/0x2b3 [ 2.554467] do_initcall_level+0xd6/0xf3 [ 2.554467] do_initcalls+0x4e/0x79 [ 2.554467] kernel_init_freeable+0xed/0x14d [ 2.554467] ? rest_init+0xc1/0xc1 [ 2.554467] kernel_init+0x1a/0x120 [ 2.554467] ret_from_fork+0x1f/0x30 [ 2.554467] </TASK> ... Kernel panic - not syncing: Fatal exception (cherry picked from commit c247cd03898c4c43c3bce6d4014730403bc13032)

In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix memory leak at failed datapath creation ovs_dp_cmd_new()->ovs_dp_change()->ovs_dp_set_upcall_portids() allocates array via kmalloc. If for some reason new_vport() fails during ovs_dp_cmd_new() dp->upcall_portids must be freed. Add missing kfree. Kmemleak example: unreferenced object 0xffff88800c382500 (size 64): comm "dump_state", pid 323, jiffies 4294955418 (age 104.347s) hex dump (first 32 bytes): 5e c2 79 e4 1f 7a 38 c7 09 21 38 0c 80 88 ff ff ^.y..z8..!8..... 03 00 00 00 0a 00 00 00 14 00 00 00 28 00 00 00 ............(... backtrace: [<0000000071bebc9f>] ovs_dp_set_upcall_portids+0x38/0xa0 [<000000000187d8bd>] ovs_dp_change+0x63/0xe0 [<000000002397e446>] ovs_dp_cmd_new+0x1f0/0x380 [<00000000aa06f36e>] genl_family_rcv_msg_doit+0xea/0x150 [<000000008f583bc4>] genl_rcv_msg+0xdc/0x1e0 [<00000000fa10e377>] netlink_rcv_skb+0x50/0x100 [<000000004959cece>] genl_rcv+0x24/0x40 [<000000004699ac7f>] netlink_unicast+0x23e/0x360 [<00000000c153573e>] netlink_sendmsg+0x24e/0x4b0 [<000000006f4aa380>] sock_sendmsg+0x62/0x70 [<00000000d0068654>] ____sys_sendmsg+0x230/0x270 [<0000000012dacf7d>] ___sys_sendmsg+0x88/0xd0 [<0000000011776020>] __sys_sendmsg+0x59/0xa0 [<000000002e8f2dc1>] do_syscall_64+0x3b/0x90 [<000000003243e7cb>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

CVE-2022-49958 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

In the Linux kernel, the following vulnerability has been resolved: kcm: fix strp_init() order and cleanup strp_init() is called just a few lines above this csk->sk_user_data check, it also initializes strp->work etc., therefore, it is unnecessary to call strp_done() to cancel the freshly initialized work. And if sk_user_data is already used by KCM, psock->strp should not be touched, particularly strp->work state, so we need to move strp_init() after the csk->sk_user_data check. This also makes a lockdep warning reported by syzbot go away.

Use-after-free vulnerability in the Linux kernel's RTL8712 WiFi driver (staging/rtl8712) where NULL callback functions (_Read/Write_MACREG) cause premature deallocation of command pointers, leading to potential memory corruption. This affects Linux kernel versions containing the vulnerable staging driver code, allowing local attackers with low privilege to achieve code execution or denial of service. The vulnerability has a CVSS score of 7.8 (high severity) but requires local access and low-level privileges, making it moderately exploitable in practice.

In the Linux kernel, the following vulnerability has been resolved: powerpc/rtas: Fix RTAS MSR[HV] handling for Cell The semi-recent changes to MSR handling when entering RTAS (firmware) cause crashes on IBM Cell machines. An example trace: kernel tried to execute user page (2fff01a8) - exploit attempt? (uid: 0) BUG: Unable to handle kernel instruction fetch Faulting instruction address: 0x2fff01a8 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=4 NUMA Cell Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.0.0-rc2-00433-gede0a8d3307a #207 NIP: 000000002fff01a8 LR: 0000000000032608 CTR: 0000000000000000 REGS: c0000000015236b0 TRAP: 0400 Tainted: G W (6.0.0-rc2-00433-gede0a8d3307a) MSR: 0000000008001002 <ME,RI> CR: 00000000 XER: 20000000 ... NIP 0x2fff01a8 LR 0x32608 Call Trace: 0xc00000000143c5f8 (unreliable) .rtas_call+0x224/0x320 .rtas_get_boot_time+0x70/0x150 .read_persistent_clock64+0x114/0x140 .read_persistent_wall_and_boot_offset+0x24/0x80 .timekeeping_init+0x40/0x29c .start_kernel+0x674/0x8f0 start_here_common+0x1c/0x50 Unlike PAPR platforms where RTAS is only used in guests, on the IBM Cell machines Linux runs with MSR[HV] set but also uses RTAS, provided by SLOF. Fix it by copying the MSR[HV] bit from the MSR value we've just read using mfmsr into the value used for RTAS. It seems like we could also fix it using an #ifdef CELL to set MSR[HV], but that doesn't work because it's possible to build a single kernel image that runs on both Cell native and pseries.

A remote code execution vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

A remote code execution vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.

Memory corruption vulnerability in the Linux kernel's fastrpc driver that occurs during device probe when the devicetree defines more sessions than the FASTRPC_MAX_SESSIONS compile-time limit. An attacker with local access and low privileges can trigger out-of-bounds memory writes to the fixed-size session array, potentially achieving information disclosure, privilege escalation, or denial of service. The vulnerability requires malicious or misconfigured devicetree configuration and is not known to be actively exploited in the wild, but represents a real risk in systems with untrusted device configuration sources.

Use-after-free vulnerability in the Linux kernel's firmware_loader subsystem that allows local attackers with low privileges to achieve code execution with high impact. The vulnerability occurs in firmware_upload_unregister() where device_unregister() can free memory that is subsequently dereferenced, enabling privilege escalation and system compromise. The flaw was discovered by the kernel test robot and is fixed by preserving a module reference before device cleanup.

Memory corruption vulnerability in the Linux kernel's fastrpc (Fast RPC) subsystem that allows a local, low-privileged attacker to corrupt kernel memory and potentially achieve privilege escalation or denial of service. The vulnerability exists in the session allocation logic where an off-by-one error in the overflow check causes the session counter to be incremented even when no sessions remain available, enabling out-of-bounds writes to a fixed-size slab-allocated array during fastrpc_session_alloc() calls on device open. This affects Linux kernel versions prior to the patch, with CVSS 7.8 (High) indicating significant local privilege escalation risk; exploitation requires local file system access to /dev/fastrpc-* device nodes.

In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix memory leak in firmware upload In the case of firmware-upload, an instance of struct fw_upload is allocated in firmware_upload_register(). This data needs to be freed in fw_dev_release(). Create a new fw_upload_free() function in sysfs_upload.c to handle the firmware-upload specific memory frees and incorporate the missing kfree call for the fw_upload structure.

Use-after-free / out-of-bounds memory access vulnerability in the Linux kernel's virtual terminal (vt) subsystem triggered when changing console fonts via the KDFONTOP ioctl. An unprivileged local attacker with console access can crash the kernel or potentially achieve information disclosure by exploiting improper selection buffer handling during font size changes. The vulnerability requires local access and user-level privileges, making it a moderate-to-high-risk issue affecting kernel versions prior to the fix.

In the Linux kernel, the following vulnerability has been resolved: binder: fix alloc->vma_vm_mm null-ptr dereference Syzbot reported a couple issues introduced by commit 44e602b4e52f ("binder_alloc: add missing mmap_lock calls when using the VMA"), in which we attempt to acquire the mmap_lock when alloc->vma_vm_mm has not been initialized yet. This can happen if a binder_proc receives a transaction without having previously called mmap() to setup the binder_proc->alloc space in [1]. Also, a similar issue occurs via binder_alloc_print_pages() when we try to dump the debugfs binder stats file in [2]. Sample of syzbot's crash report: ================================================================== KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f] CPU: 0 PID: 3755 Comm: syz-executor229 Not tainted 6.0.0-rc1-next-20220819-syzkaller #0 syz-executor229[3755] cmdline: ./syz-executor2294415195 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022 RIP: 0010:__lock_acquire+0xd83/0x56d0 kernel/locking/lockdep.c:4923 [...] Call Trace: <TASK> lock_acquire kernel/locking/lockdep.c:5666 [inline] lock_acquire+0x1ab/0x570 kernel/locking/lockdep.c:5631 down_read+0x98/0x450 kernel/locking/rwsem.c:1499 mmap_read_lock include/linux/mmap_lock.h:117 [inline] binder_alloc_new_buf_locked drivers/android/binder_alloc.c:405 [inline] binder_alloc_new_buf+0xa5/0x19e0 drivers/android/binder_alloc.c:593 binder_transaction+0x242e/0x9a80 drivers/android/binder.c:3199 binder_thread_write+0x664/0x3220 drivers/android/binder.c:3986 binder_ioctl_write_read drivers/android/binder.c:5036 [inline] binder_ioctl+0x3470/0x6d00 drivers/android/binder.c:5323 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] ================================================================== Fix these issues by setting up alloc->vma_vm_mm pointer during open() and caching directly from current->mm. This guarantees we have a valid reference to take the mmap_lock during scenarios described above. [1] https://syzkaller.appspot.com/bug?extid=f7dc54e5be28950ac459 [2] https://syzkaller.appspot.com/bug?extid=a75ebe0452711c9e56d9

Out-of-bounds memory read vulnerability in the Linux kernel's Broadcom Raspberry Pi clock driver (clk-bcm-rpi) caused by unsafe assumptions about firmware-provided data structures. The vulnerability affects Raspberry Pi systems running vulnerable Linux kernel versions and allows a local attacker with user-level privileges to read sensitive kernel memory, potentially leading to information disclosure or denial of service. This is a kernel-level vulnerability requiring local access, with moderate real-world risk due to the local attack vector requirement.