Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessReach network-exposed DataPower endpoint
-
DeliveryCraft input triggering worst-case list traversal
-
ExploitSend sustained crafted requests
-
ExecutionExhaust processing resources
-
ImpactDeny service to legitimate traffic
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A06:2025 - Insecure Design
ASVS 5.0
V2 - Validation and Business Logic Resource consumption limits
MITRE ATT&CK
1 technique across 1 tactic: Impact The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Exploitation requires network reachability to a DataPower Gateway request-processing endpoint and the ability to submit input that forces worst-case linked-list traversal (CWE-400 algorithmic complexity); no authentication (PR:N) and no user interaction (UI:N) are required against affected versions 10.5.0.0-10.5.0.22, 10.6.0.0-10.6.0.10, 10.6.1-10.6.6, and 11.0.0.0-11.0.0.2. The primary limiting factor is the CVSS AC:H rating: the attacker must specifically craft input to hit the pathological code path rather than trigger it with arbitrary traffic, and impact is confined to availability (service degradation/denial) with no confidentiality or integrity effect. The description does not name a specific feature toggle or non-default configuration as a prerequisite, so applicability should be assumed across affected versions until IBM advisory 7289775 states otherwise. |
| Impact | This is a genuine but moderate-priority issue rather than a top-tier emergency. The CVSS 3.1 vector (AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H, base 5.9) shows a network-reachable, unauthenticated flaw with impact limited solely to availability - there is no confidentiality or integrity exposure. The defining mitigating signal is AC:H: the algorithmic-complexity (CWE-400) weakness in linked-list traversal requires an attacker to craft input that forces worst-case processing, so exploitation is not trivially reliable. No EPSS score was supplied in the input, so exploitation probability cannot be quantified. The CVE is NOT on the CISA KEV list and no public POC is referenced, so this is no public exploit identified at time of analysis - the risk is theoretical/potential rather than demonstrated. SSVC-style reading: exploitation status = none observed, technical impact = partial (availability only, no code execution or data loss), automatability is plausible for a DoS flood but tempered by AC:H. Net: a real availability risk worth patching for internet-facing gateways, but not a drop-everything priority absent evidence of active exploitation. Note the one conflict to verify: AC:H implies non-trivial triggering conditions, yet the description gives no specific precondition, so the practical ease of triggering the worst-case path should be confirmed with IBM. |
| Exploit ScenarioDerived | A remote, unauthenticated attacker sends specially crafted requests to an internet-facing IBM DataPower Gateway designed to force pathological worst-case traversal of an internal linked list, driving CPU/processing time up disproportionately to input size. Repeated or sustained crafted requests exhaust processing resources and degrade or deny service to legitimate API/integration traffic. No public exploit code is identified at time of analysis, and the CVSS AC:H rating indicates the attacker must shape input carefully to reliably trigger the condition. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 08, 2026
Denial of service in IBM DataPower Gateway (10.5.0.0 through 10.5.0.22, 10.6.0.0 through 10.6.0.10, 10.6.1 through 10.6.6, and 11.0.0.0 through 11.0.0.2) allows a remote unauthenticated attacker to degrade or stall request processing by submitting input that forces worst-case algorithmic complexity during linked-list traversal. Rated CVSS 5.9 (AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H), the flaw is an availability-only issue: the CVSS AC:H rating reflects that the attacker must craft input to hit the pathological code path rather than simply flooding the gateway with arbitrary traffic, and impact is confined to service degradation or denial with no confidentiality or integrity effect. No public exploit identified at time of analysis, and a vendor patch is available.
RemediationAI
Vendor patch status is Patch available per vendor advisory - the data available here does not include a discrete fix version string, so administrators should consult IBM's advisory at https://www.ibm.com/support/pages/node/7289775 for the fixed firmware level for each affected train (10.5.0.x, 10.6.0.x, 10.6CD 10.6.1-10.6.6, and 11.0.0.x) and upgrade along the supported path for that branch rather than assuming a generic 'latest' image covers it; there is no public exploit code to race against, so normal change-control windows are acceptable, but availability-critical gateways should be prioritized. Until the patch is applied, compensating controls are constrained because this is a request-processing flaw rather than a configuration issue: front the DataPower endpoints with a reverse proxy or WAF that enforces strict request-size, element-depth, and per-client rate limits, which raises the cost of reaching the pathological traversal path but adds latency and can break legitimate large SOAP/XML transactions; restrict network reachability of request-processing ports to known client ranges via ACLs or a load-balancer allowlist, accepting that this is impractical for genuinely internet-facing API gateway deployments; enable connection and request-time/CPU thresholds on the gateway where supported, understanding that aggressive thresholds may reject legitimate slow or large requests and cause false-positive client failures; and monitor gateway CPU saturation, worker-thread pool exhaustion, and queue depth for anomalous single-client request patterns as a practical detection proxy for exploitation attempts. Because the impact is availability-only, no credential rotation or data-integrity follow-up is required by this CVE.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 4 packages in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The root cause is CWE-400 (Uncontrolled Resource Consumption) realized as algorithmic complexity - a linked-list traversal whose cost grows superlinearly with attacker-influenced input, so a comparatively small number of crafted requests consumes disproportionate CPU and can saturate gateway worker threads. DataPower Gateway is IBM's XML/SOAP/REST/API security and multi-protocol gateway, typically deployed at a trust boundary where its request-processing endpoints are network-reachable by design, which is why the vector is AV:N with PR:N and UI:N: no credentials and no victim interaction are needed, but the attacker must know or discover the input shape that triggers the pathological traversal (AC:H). CPE data identifies the affected product families as datapower_gateway_10.5.0, datapower_gateway_10.6.0, datapower_gateway_10.6cd, and datapower_gateway_11.0.0, matching the EUVD version ranges for the 10.5.0, 10.6.0, 10.6CD, and 11.0.0 trains. Because a DataPower gateway is a shared enforcement point, a successful exhaustion event can affect every downstream service it fronts, but the C:N/I:N profile in the assessed vector means there is no evidence of data exposure or tampering - the impact is availability only, and no specific feature toggle or non-default configuration is named as a prerequisite.
Know when Datapower Gateway 10 6Cd gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H
Network-reachable and unauthenticated (AV:N/PR:N), but worst-case triggering requires crafted input so AC:H; impact is availability-only (A:H, C:N/I:N) with no scope change.
Primary rating from Vendor (ibm).
CVSS VectorVendor: ibm
DescriptionCVE.org
IBM DataPower Gateway 10.5.0.0 through 10.5.0.22, 10.6.1 through 10.6.6, 10.6.0.0 through 10.6.0.10, and 11.0.0.0 through 11.0.0.2 could allow a remote attacker to cause a denial of service due to algorithmic complexity in linked-list traversal.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Denial of Service attacks render applications or systems unavailable by overwhelming resources or triggering failure conditions.
More in Datapower Gateway 10 6Cd
View allUnauthenticated remote code execution affects IBM DataPower Gateway across multiple release streams - 10.5.0.0 through 1
Unauthenticated remote code execution in IBM DataPower Gateway affects the 10.5.0.0 through 10.5.0.22, 10.6.0.0 through
Arbitrary code execution in IBM DataPower Gateway is possible when a user with existing local access to the appliance su
Empty-password LDAP authentication bypass in IBM DataPower Gateway lets remote, unauthenticated attackers obtain adminis
Remote code execution in IBM DataPower Gateway (10.5.0.0-10.5.0.22, 10.6.0.0-10.6.0.10, 10.6.1-10.6.6, and 11.0.0.0-11.0
A remotely reachable, unauthenticated out-of-bounds write (buffer overflow, CWE-787) in IBM DataPower Gateway can corrup
IBM DataPower Gateway versions 10.5.0.0-10.5.0.20, 10.6.0.0-10.6.0.8, and 10.6.1.0-10.6.5.0 are vulnerable to cross-site
Out-of-bounds write in IBM DataPower Gateway lets unauthenticated remote attackers corrupt process memory, resulting in
An out-of-bounds write in IBM DataPower Gateway (10.5.0.0 through 10.5.0.22, 10.6.0.0 through 10.6.0.10, 10.6.1 through
XML external entity injection in IBM DataPower Gateway 10.5.0.0-10.5.0.22, 10.6.0.0-10.6.0.10, 10.6.1-10.6.6, and 11.0.0
Heap-based buffer overflow (CWE-787) in IBM DataPower Gateway allows an unauthenticated remote attacker to crash the gat
Unauthenticated remote attackers can trigger a memory-safety fault in IBM DataPower Gateway that crashes the affected se
EUVD-2026-94993
GHSA-vv5f-9556-p73h
NVD
CVE.org
EPSS
Vulnrichment
Exploit-DB