Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessReach exposed DTCP MOVE service
-
ExploitInvoke unauthenticated critical function
-
ExecutionBypass missing authentication check
-
ImpactGain system access
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A07:2025 - Authentication Failures
ASVS 5.0
V6 - Authentication Authentication required for critical functions
MITRE ATT&CK
1 technique across 1 tactic: Initial Access The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | The product must be deployed and network-reachable (sMedio DTCP MOVE is a DTCP-IP content-transfer application installed on QNAP NAS devices, per the QNAP release-notes reference). Per CVSS AV:N/AC:L/PR:N/UI:N, exploitation requires no authentication, no user interaction, and no special configuration against affected versions prior to 1.4.5 - the limiting factor is simply whether the app is installed and the affected service is exposed to the attacker's network segment. The principal mitigation/limit is deployment scarcity (the app is an optional, niche QNAP add-on, not a default NAS service) and reachability: NAS devices behind NAT or not exposing the DTCP MOVE service externally sharply reduce the realistic attack surface. |
| Impact | The vendor-supplied CVSS 4.0 vector (AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H, score 9.3) describes a remotely reachable, low-complexity, unauthenticated flaw with high impact to confidentiality, integrity, and availability - consistent with the CWE-306 (Missing Authentication for Critical Function) classification, where a critical function is exposed without any authentication gate. On signal strength alone this is a serious, easy-to-exploit issue. However, the real-world priority is tempered by missing and conflicting context: there is NO EPSS score provided, NO CISA KEV listing, and NO public proof-of-concept referenced, so there is no evidence of active or at-scale exploitation at time of analysis. The description is also notably vague ('could allow remote attackers to gain access to the system'), which does not independently corroborate the full VC:H/VI:H/VA:H impact claimed by the vector - the impact rating is vendor-asserted rather than demonstrable from the text. Net: treat as a high-priority patch for anyone actually running sMedio DTCP MOVE because unauthenticated network exploitation is plausible, but the absence of EPSS/KEV/POC signals and the product's narrow deployment footprint argue against treating it as an emergency on par with a widely exploited mass-market CVE. |
| Exploit ScenarioDerived | A remote attacker with network reachability to a NAS running sMedio DTCP MOVE sends requests directly to a critical function that lacks any authentication check, obtaining unauthorized access to the system without credentials or user interaction. Because the CVSS vector is AV:N/AC:L/PR:N/UI:N, no special timing, privileges, or victim action is required. No public exploit code is referenced, so exploitation would currently require an attacker to independently develop the request. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 15, 2026
Missing authentication in sMedio DTCP MOVE before version 1.4.5 lets remote, unauthenticated attackers reach critical functions of the DTCP-IP content-transfer service (sMedioDTCPServer) running on QNAP NAS devices, yielding high impact to confidentiality, integrity and availability (vendor CVSS 4.0 base 9.3; independent assessment CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). The vendor has shipped a fixed release (1.4.5 and later), and no public exploit code or confirmed active exploitation (CISA KEV) was identified at time of analysis. Real-world exposure is limited mainly by deployment scarcity - this is an optional, niche QNAP add-on rather than a default NAS service - and by whether the affected service is network-reachable rather than confined behind NAT or a segmented LAN.
RemediationAI
Vendor-released patch: sMedio DTCP MOVE 1.4.5 - upgrade to 1.4.5 or later via the QNAP App Center (App Center > sMedio DTCP MOVE > Update), or by uninstalling and reinstalling the current package, and verify the installed version after updating against the QNAP release notes at https://www.qnap.com/en/app-release-notes?keyword=sMedio&app=sMedioDTCPServer&product-line=nas. If the app cannot be patched immediately, the most effective compensating control is to uninstall sMedio DTCP MOVE from any NAS that does not actively need DTCP-IP content transfer; this removes the unauthenticated service entirely, with the trade-off that legitimate protected-media move/copy functionality is lost. Where the app must remain, block the DTCP MOVE service ports at the network boundary, remove any port-forward or UPnP/NAT-PMP mapping that exposes the NAS to the internet, and restrict access to the NAS and its application services to trusted internal hosts or a VPN - the trade-off being reduced remote usability for legitimate clients. Placing affected NAS units on an isolated VLAN separate from user workstations and servers limits lateral movement if the service is abused, at the cost of additional network configuration. Because exploitation is unauthenticated and requires no user interaction, detection should focus on unexpected inbound connections to the DTCP MOVE service from untrusted network ranges rather than on login-failure telemetry.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The root cause is CWE-306 (Missing Authentication for Critical Function): the application exposes functionality that should require a credential or session check without enforcing any authentication gate. sMedio DTCP MOVE is a QNAP App Center package (internal app name sMedioDTCPServer) that implements DTCP-IP, the Digital Transmission Content Protection over Internet Protocol standard used to move and copy DRM-protected media between devices on a home or small-office network. Because the affected component is the DTCP-IP content-transfer server itself, the unauthenticated surface is the network service it listens on, not a web UI login flow. The CPE cpe:2.3:a:qnap_systems_inc.:smedio_dtcp_move:*:*:*:*:*:*:*:* uses a wildcard version, consistent with all releases prior to the fixed 1.4.5 being affected. The vendor's CVSS 4.0 vector (AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H) indicates no attack requirements, no privileges and no user interaction, while SC:N/SI:N/SA:N shows the impact is contained within the vulnerable component - i.e., the attacker gains control of the DTCP MOVE service and its host context rather than pivoting into downstream systems through a scoreable scope change. This aligns with the assessed CVSS 3.1 vector, in which scope is unchanged (S:U) with high CIA impact.
Know when Smedio Dtcp Move gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N
CWE-306 missing authentication on a network-facing function gives AV:N/AC:L/PR:N/UI:N; vendor-asserted full system access supports C/I/A:H with no scope change.
Primary rating from Vendor (qnap).
CVSS VectorVendor: qnap
Lifecycle Timeline
2DescriptionCVE.org
A missing authentication for critical function vulnerability has been reported to affect sMedio DTCP MOVE. If exploited, the vulnerability could allow remote attackers to gain access to the system.
We have already fixed the vulnerability in the following version: sMedio DTCP MOVE 1.4.5 and later
Executive ViewAI
A missing authentication flaw in the optional sMedio DTCP MOVE add-on for QNAP NAS devices allows any network-reachable attacker to take control of the DTCP-IP content-transfer service without credentials, putting the confidentiality, integrity and availability of data on affected storage appliances at full risk. Because the vulnerable component is a niche, non-default add-on rather than core NAS firmware, the number of exposed systems is likely small, but any organization that has installed it and exposed it beyond a segmented network should treat this as an urgent, internet-facing exposure.
Apply vendor patch. Vendor-released patch: sMedio DTCP MOVE 1.4.5 and later. Until the upgrade is completed, uninstall or disable the optional sMedio DTCP MOVE add-on, block external access to sMedioDTCPServer at the firewall, remove port forwards/NAT rules, and confine the service to a segmented, trusted management VLAN.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Authentication bypass attacks exploit flaws in the verification mechanisms that control access to systems and applications.
EUVD-2026-101974
GHSA-8rwv-63p7-cjc6
NVD
CVE.org
EPSS
Vulnrichment
Exploit-DB