Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessReach HNAP CGI endpoint over network
-
DeliveryCraft malicious SOAPACTION header
-
ExploitInject command into system() call
-
ExecutionExecute arbitrary OS commands as root
-
ImpactFull device compromise and pivot
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A05:2025 - Injection
ASVS 5.0
V1 - Encoding and Sanitization Command injection prevention
MITRE ATT&CK
1 technique across 1 tactic: Execution The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Requires network reachability to the device's HNAP CGI handler (/htdocs/cgibin); the attacker supplies a crafted SOAPACTION argument that is passed into the vulnerable system function. No authentication, credentials, user interaction, or non-default configuration is indicated (PR:N/UI:N), so default installations exposing the HNAP service are affected. The practical limiting factor is exposure of the HNAP management interface: LAN-only reachability largely confines exploitation to the local network, whereas devices with WAN-side remote management enabled are exploitable directly from the internet. Impact is further bounded by the product itself - this affects specifically D-Link DIR-868L firmware 2.01b05, an end-of-life model. |
| Impact | All available signals point to genuine high priority. The CVSS 4.0 vector (AV:N/AC:L/AT:N/PR:N/UI:N) describes remote, unauthenticated, low-complexity exploitation with high impact across confidentiality, integrity and availability, consistent with OS command injection (CWE-77) in a CGI handler that typically runs as root on embedded routers. The vector's E:P (Proof-of-Concept) exploit-maturity flag aligns with the independently reported public POC on GitHub, reinforcing that working exploit code exists. No EPSS score was provided in the input, so probabilistic exploitation likelihood cannot be quantified here. The CVE is NOT listed in CISA KEV per the provided data, so despite a public exploit there is no confirmation of active in-the-wild exploitation - the current status is publicly available exploit code, not confirmed exploitation. The one mitigating real-world factor is product status: the DIR-868L is an older, end-of-life D-Link consumer router, so the absolute population of exposed devices is smaller than for current flagship products, and internet exposure depends on remote-management being reachable. Net: a real, actionable high-severity issue for any environment still running this device, tempered by its retired/niche footprint rather than by any technical difficulty. |
| Exploit ScenarioDerived | A remote attacker sends a crafted HNAP request to the router's /htdocs/cgibin endpoint with a malicious SOAPACTION header value that is passed unsanitized into a system() call, injecting arbitrary OS commands executed with the CGI process's privileges (typically root). A public proof-of-concept is available on GitHub (Walnut1337/Command-Injection-DIR-868L), lowering the skill required; given AV:N/AC:L/PR:N/UI:N the attack needs only network reachability to the HNAP service and no authentication or user interaction. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 14, 2026
Unauthenticated OS command injection in the D-Link DIR-868L router running firmware 2.01b05 lets remote attackers execute arbitrary shell commands on the device by sending a crafted SOAPACTION argument to the HNAP handler exposed through /htdocs/cgibin. The flaw is remotely reachable with no credentials, no user interaction, and no non-default configuration required (CVSS v4.0 base 9.3, assessed v3.1 as AV:N/AC:L/PR:N/UI:N/C:H/I:H/A:H), so any installation exposing the HNAP management interface is at risk; LAN-only deployments are largely confined to local-network exploitation, while devices with WAN-side remote management enabled are directly attackable from the internet. Publicly available exploit code exists (a detailed advisory and PoC are published on GitHub), which raises the practical urgency, though active exploitation is not confirmed by CISA KEV, and the product is an end-of-life model for which no vendor-released patch has been identified.
RemediationAI
No vendor-released patch has been identified at time of analysis, and because the DIR-868L is an end-of-life model, a fixed firmware build may never appear; the strongest remediation is to retire or replace the device with a model still receiving security updates. If the device must remain in service, apply compensating controls in this order: disable WAN-side remote management and UPnP/WAN administration so the HNAP service is reachable only from the LAN, and block inbound TCP 80/443 (and any other management ports) at the perimeter firewall - this is the single most effective step, since it collapses the attack surface from internet-wide to LAN-only, at the cost of losing remote administration. On the LAN, segment IoT/router management traffic into a separate VLAN or restrict access to the device's HTTP interface to trusted administrative hosts, keeping in mind that any host on the permitted segment, including a compromised client, can still reach the vulnerable CGI handler. Because no official fix is available, do not rely on configuration toggles alone: monitor device logs for malformed or unexpected SOAPACTION headers and anomalous outbound connections from the router, and plan hardware replacement. Additional context and the researcher's technical write-up are at https://github.com/Walnut1337/Command-Injection-DIR-868L/blob/main/ADVISORY.md, with the vulnerability records at https://vuldb.com/cve/CVE-2026-110536 and https://vuldb.com/vuln/419825.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The affected component is the HNAP (Home Network Administration Protocol) CGI handler shipped in D-Link DIR-868L firmware 2.01b05. HNAP is a SOAP-over-HTTP management protocol used by consumer routers for remote configuration and status queries; requests are dispatched to the CGI binary at /htdocs/cgibin, which parses SOAP envelopes and acts on header fields such as SOAPACTION. The root cause is CWE-77 (Improper Neutralization of Special Elements used in a Command), specifically OS command injection: user-controlled input taken from the SOAPACTION argument is assembled into a shell command string and passed to the underlying system() function without sanitization or argument separation, so shell metacharacters embedded in the header are interpreted by the device's shell and executed with the privileges of the CGI process (typically root on embedded router firmware). Because the vulnerable entry point is the network-facing HTTP management interface and the CVSS vector carries PR:N/UI:N, exploitation requires only network reachability to the HNAP endpoint and a single crafted request - no authentication, no session, and no user action. This class of bug is endemic to legacy embedded CGI handlers where SOAP parameters are interpolated directly into command invocations, and it is distinct from memory-safety bugs in that the attacker gains direct, reliable command execution rather than needing to build a memory-corruption exploit.
Know when D-Link gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:H/SI:H/SA:H/E:P
Remote unauthenticated command injection with low complexity and no user interaction; code runs as root on the device giving full C/I/A impact, so AV:N/AC:L/PR:N/UI:N and C:H/I:H/A:H.
Primary rating from Vendor (vuldb).
CVSS VectorVendor: vuldb
DescriptionCVE.org
A vulnerability was determined in D-Link DIR-868L 2.01b05. This impacts the function system of the file /htdocs/cgibin of the component HNAP CGI Handler. Executing a manipulation of the argument SOAPACTION can lead to os command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.
Articles & Coverage 1
Technical POC Analysis
CWE-77: improper neutralization of special elements used in an OS command.
Full technical POC analysis - root cause, step-by-step exploitation and patch breakdown - is part of the Pro and Business plans.
Latest POC
1 public PoC link from github
Sign in to open the public PoC links collected for this CVE.
Executive ViewAI
D-Link DIR-868L routers running firmware 2.01b05 are affected by a critical unauthenticated remote command injection vulnerability, and publicly available exploit code exists. With no vendor-released patch identified at time of analysis, any organization using these end-of-life devices-particularly those with WAN-side management enabled-faces severe risk of full device compromise and potential network intrusion. Leadership should prioritize immediate mitigation to prevent operational disruption and data exposure.
Disable WAN-side remote management; restrict HNAP interface to trusted LAN IPs via firewall rules; place devices on isolated VLAN; monitor for anomalous SOAPACTION requests; if feasible, replace end-of-life device or use a reverse proxy to filter malicious traffic.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
OS command injection occurs when an application passes unsanitized user input directly into system shell commands.
The miniigd SOAP service in Realtek SDK allows remote attackers to execute arbitrary code via a crafted NewInternalClien
The D-Link DIR-645 Wired/Wireless Router Rev. Rated high severity (CVSS 8.8), this vulnerability is no authentication re
The ping tool in multiple D-Link and TRENDnet devices allow remote attackers to execute arbitrary code via the ping_addr
D-Link DIR-820L 1.05B03 was discovered to contain remote command execution (RCE) vulnerability via HTTP POST to get set
Stack-based buffer overflow in the do_hnap function in www/my_cgi.cgi in D-Link DSP-W215 (Rev. Rated critical severity (
Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DIR-600 router (rev. Rated high severity (CVSS 8.0)
Unrestricted file upload vulnerability in D-Link DCS-931L with firmware 1.04 and earlier allows remote authenticated use
D-Link DIR-600 Rev Bx devices with v2.x firmware allow remote attackers to read passwords via a model/__show_info.php?RE
Multiple cross-site scripting (XSS) vulnerabilities in D-Link DIR-645 Router (Rev. Rated medium severity (CVSS 4.3), thi
Directory traversal vulnerability in D-Link DVG-N5402SP with firmware W1000CN-00, W1000CN-03, or W2000EN-00 allows remot
A vulnerability in the D-Link DIR-859 router with firmware version A3 1.05 and earlier permits unauthorized individuals
The web interface of multiple D-Link routers, including DIR-600 rev B (≤2.14b01) and DIR-300 rev B (≤2.13), contains an
EUVD-2026-101590
GHSA-v8c5-wjhr-m62q
NVD
CVE.org
EPSS
Vulnrichment
VulDB
Exploit-DB