Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessReach affected HPE device over network
-
ExploitSend crafted malicious traffic
-
ImpactTrigger denial-of-service condition
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A06:2025 - Insecure Design
ASVS 5.0
V2 - Validation and Business Logic Resource consumption limits
MITRE ATT&CK
1 technique across 1 tactic: Impact The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Per the CVSS vector the flaw is remotely reachable and requires no authentication or user interaction (AV:N/AC:L/PR:N/UI:N), so exploitation needs only network access to an affected HPE networking device. However, no CVE description or advisory text was provided, so the trigger is not described in the available sources - the specific feature, protocol, port, or configuration that must be reachable cannot be named from this data. The primary limiting factor is network exposure: devices not reachable by the attacker (segmented/management-plane-only, firewalled) are not exploitable, and impact is confined to availability (service disruption/DoS), with no confidentiality or integrity loss indicated. Confirm affected models, versions, and any mode-specific preconditions against HPE bulletin hpesbnw05162en_us. |
| Impact | The input CVSS 3.1 vector (AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H, base 7.5) describes a remotely reachable, unauthenticated, low-complexity flaw whose only impact is availability (A:H) with no confidentiality or integrity impact - i.e. a denial-of-service condition, not data exposure. This directly contradicts the single input Tag 'Information Disclosure', which implies a confidentiality impact the vector explicitly rates as C:N; the tag should be treated as suspect and verified against the HPE advisory. No EPSS score, no CISA KEV listing, and no SSVC exploitation/automatable/technical-impact values were supplied, so exploitation likelihood cannot be quantified from the data. There is no public exploit identified at time of analysis. The vuln.today Decision label is 'this_week', indicating prompt but non-emergency remediation; this is consistent with a network-reachable high-availability-impact issue that currently lacks evidence of active exploitation. Net read: a legitimate patch-this-cycle item for affected HPE networking deployments, but not a drop-everything emergency on present evidence - reassess if the HPE advisory or a later KEV entry indicates exploitation. |
| Exploit ScenarioDerived | A remote, unauthenticated attacker with network reachability to an affected HPE networking device sends crafted traffic that the device mishandles, exhausting resources or crashing the service and denying availability to legitimate users. No public exploit code is identified at time of analysis, and the exact trigger is not described in the available sources. Because the CVSS vector is AV:N/AC:L/PR:N/UI:N, no authentication or user interaction is required to reach the condition. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 22, 2026
Remote, unauthenticated denial of service affecting HPE networking devices: the CVSS 3.1 vector (AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H, base 7.5) describes a flaw that any network-reachable attacker can trigger with low complexity and no credentials or user interaction, degrading availability only. No CVE description, CWE mapping, or advisory text was available, so the specific feature, protocol, port, or configuration that must be exposed cannot be named, and exact affected models and firmware versions still need to be confirmed against HPE bulletin hpesbnw05162en_us. No public exploit code was identified at time of analysis and the issue is not confirmed as actively exploited (no CISA KEV listing); the accompanying 'Information Disclosure' tag conflicts with the assessed C:N/I:N/A:H vector and should be reconciled with the vendor bulletin rather than treated as evidence of data exposure.
RemediationAI
No fixed firmware version is identified in the available data, so patch status is unconfirmed; the authoritative source is the HPE support document at https://support.hpe.com/hpesc/public/docDisplay?docId=hpesbnw05162en_us&docLocale=en_US, which should be checked for affected models, fixed releases, and any vendor-stated preconditions before scheduling upgrades. Because the assessed exposure is purely network reachability with availability-only impact, the practical compensating control is to reduce who can reach the affected device: place management and control-plane interfaces behind firewalls or ACLs, restrict access to trusted administrative networks, and segment the equipment away from untrusted or internet-facing paths until a vendor fix is applied. The trade-off is that tightening these filters can interrupt legitimate remote management, monitoring, and any business traffic that shares the blocked paths, so changes should be baselined against current flows before enforcement and the vendor bulletin re-checked for additional guidance.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The record supplies no CWE identifier, no description and no CPE strings, so the underlying technology cannot be pinned to a specific module, daemon, or protocol handler inside the HPE networking firmware; only the reporter (security-alert@hpe.com) and the HPE support document hpesbnw05162en_us tie the issue to HPE networking equipment. What the CVSS vector does establish is the exposure profile rather than the mechanism: the flaw is network-reachable (AV:N), requires no privileges (PR:N) and no user interaction (UI:N) at low attack complexity (AC:L), which for an appliance typically means an attacker who can send crafted traffic to a listening service can drive the device into a resource-exhaustion or crash state. Impact is scored solely against availability (A:H) with no confidentiality or integrity effect, and the trigger itself is not described in the available sources. No patch references, upstream commits, or fixed-version details were provided, so patch status and any mode-specific (management-plane versus data-plane) preconditions are unverified from this data and must be read from the HPE bulletin.
Know when the next one hits your stack
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
Vector reaches device over the network without auth or interaction (AV:N/AC:L/PR:N/UI:N); impact is availability-only denial of service (A:H), with C:N/I:N.
Primary rating from Vendor (hpe).
CVSS VectorVendor: hpe
DescriptionCVE.org
No description provided
Executive ViewAI
A high-severity availability vulnerability (CVSS 7.5) affects HPE networking devices, allowing any network-reachable attacker to disrupt device operation without credentials or user interaction. Impact is limited to availability, not data confidentiality or integrity, but successful exploitation could cause outages in network-dependent operations. Leadership should care because network device outages can cascade into service interruption for downstream business functions, and no vendor patch is currently available.
No vendor-released patch identified at time of analysis; restrict network reachability to HPE devices, segment affected devices from untrusted networks, monitor availability events, and track vendor bulletin hpesbnw05162en_us for interim mitigations and firmware updates.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Denial of Service attacks render applications or systems unavailable by overwhelming resources or triggering failure conditions.
EUVD-2026-108395
GHSA-324h-8x5c-xfg2
NVD
CVE.org
EPSS
Vulnrichment
VulDB
Exploit-DB