Skip to main content

Tanium End-User CX CVE-2026-108306

| EUVDEUVD-2026-111262 HIGH
Improper Link Resolution Before File Access (CWE-59)
2026-10-27 Tanium GHSA-mpvq-w52p-rxv6
7.8
CVSS 3.1 · Vendor: Tanium
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Obtain low-privileged local access to endpoint
  2. Exploit
    Abuse link-following flaw (CWE-59) in End-User Notifications
  3. Execution
    Escalate to elevated privileges
  4. Impact
    Full compromise of host

Vulnerability Assessment

Weakness
CWE
OWASP Top 10:2025
A01:2025 - Broken Access Control
ASVS 5.0
V5 - File Handling Symlink resolution safety
Exploitation Conditions

Requires existing local, authenticated access with low privileges (AV:L, PR:L) on a host running an affected Tanium End-User-CX or Endpoint Configuration Toolset Solution version; no user interaction is needed (UI:N). The weakness is classified as CWE-59 (link following), but the available sources do not describe the specific feature, file, or symlink condition that triggers it, so the exact prerequisite configuration is not confirmed. Limiting factors: the attacker must already have a foothold on the endpoint (no remote/network path), and the affected software is enterprise agent software rather than internet-facing, which constrains realistic exploitation to post-compromise scenarios.

Impact

The signals converge on a genuine but non-emergency priority. The CVSS base score of 7.8 is driven entirely by high confidentiality, integrity and availability impact (C:H/I:H/A:H) on an unchanged scope, not by ease of reach: the vector is local (AV:L) and requires existing low privileges (PR:L), so this is a privilege-escalation primitive for an attacker who already has a foothold, not a remote entry point. No EPSS score was supplied, the CVE is not on the CISA KEV list, and no public exploit or PoC reference is present - only a vendor advisory - so there is no evidence of active or imminent mass exploitation. The vuln.today decision label is 'this_week' (not act_now/emergency), consistent with a locally-exploitable, vendor-reported, already-patched flaw. CWE-59 (link following) is listed as the weakness class, but the description is a single sentence and does not state how the flaw is triggered, so the exact mechanism is not confirmed from the available sources. Net: patch on the vendor's 'this_week' cadence; treat as a post-compromise escalation risk rather than a widespread external threat.

Exploit ScenarioDerived

An attacker who already has a low-privileged account or code-execution foothold on a managed endpoint running Tanium End-User-CX / Endpoint Configuration Toolset abuses the End-User Notifications component to escalate to higher (likely SYSTEM/root-level) privileges on that host. Exploitation is local and needs no user interaction (AV:L/UI:N), but it does require the attacker to first be present on the machine. No public exploit code or PoC reference is identified at time of analysis.

This Week Schedule remediation this week. Why: HIGH severity (CVSS 7.0-8.9).
Patch available 0.1% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 28, 2026

Local privilege escalation in Tanium End-User CX and the Tanium Endpoint Configuration Toolset Solution lets a user who is already logged on with low privileges raise their rights to a high-impact level (C:H/I:H/A:H) on the affected endpoint, with no user interaction required. Affected builds are end-user-cx releases up to 1.8.47, 1.11.605, 1.19.325, 1.21.835, 1.22.1199, 1.23.766 and 1.24.590, plus Endpoint Configuration Toolset Solution 1.51.60, 1.59.50 and 1.71.25; Tanium has released fixes for these branches. No public exploit was identified at time of analysis, and the weakness is classified as CWE-59 link following, although the sources do not describe the precise file or link condition that triggers it. The realistic exposure is a post-compromise scenario on an enterprise agent endpoint rather than a network-facing attack, which is why the priority is 'this_week' rather than emergency action.

RemediationAI

Tanium has released fixes: update End-User CX to the corrected build on each deployed branch - 1.8.47, 1.11.605, 1.19.325, 1.21.835, 1.22.1199, 1.23.766 or 1.24.590 as applicable - and Endpoint Configuration Toolset Solution to 1.51.60, 1.59.50 or 1.71.25, verifying the exact mapping of vulnerable-to-fixed builds in Tanium's advisory TAN-2026-065 (https://security.tanium.com/TAN-2026-065) before rolling out. The supplied sources do not describe a vendor workaround, so the practical interim control is to reduce exposure until upgrades complete by limiting which accounts can log on interactively to hosts running the affected agents and by treating any low-privileged local foothold on those endpoints as a potential escalation path; both measures constrain attacker prerequisites rather than removing the flaw and do not substitute for patching. The advisory, plus the EUVD entry at https://nvd.nist.gov/vuln/detail/CVE-2026-108306, should be monitored for any additional guidance or fixed-version corrections.

Affected VersionsENISA

end-user-cx 1.23.766 <1.23.766
end-user-cx 1.22.1199 <1.22.1199
end-user-cx 1.11.605 <1.11.605
Endpoint Configuration Toolset Solution 1.59 <1.59.50
end-user-cx 1.19.325 <1.19.325
Endpoint Configuration Toolset Solution 1.51 <1.51.60
end-user-cx 1.24.590 <1.24.590
Endpoint Configuration Toolset Solution 1.71 <1.71.25
end-user-cx 1.8.47 <1.8.47
end-user-cx 1.21.835 <1.21.835

Affected Packages

euvd end_user_cx fix: 1.8.47, 1.11.605, 1.19.325, 1.21.835, 1.22.1199, 1.23.766, 1.24.590
euvd endpoint_configuration_toolset_solution fix: 1.51.60, 1.59.50, 1.71.25

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 2 packages in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

The flaw is tracked as CWE-59 (improper link resolution before file access, commonly called link following) and scored CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H, meaning the attacker needs local access and low privileges, needs no user interaction, and can affect only the same security scope but with high confidentiality, integrity and availability impact. The vulnerable component sits in Tanium's End-User Notifications functionality, which is delivered through the end-user-cx product and the Endpoint Configuration Toolset Solution - enterprise agent software deployed to managed endpoints rather than an internet-facing service. At the class level, link-following bugs arise when privileged code follows a symbolic link or similar indirection created by a lower-privileged user and then operates on the resolved target with elevated rights, but the supplied sources do not state which feature, path or symlink condition is involved, so the exact trigger and any prerequisite configuration are not confirmed. The CPE data confirms the two affected product families as tanium:end-user-cx and tanium:endpoint_configuration_toolset_solution.

Know when Tanium gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (Tanium) PRIMARY 7.8 HIGH
AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
vuln.today AI 7.8 HIGH

Local escalation by an already-authenticated low-privileged user (AV:L/PR:L), no user interaction, yielding full host-level compromise (C:H/I:H/A:H) within an unchanged scope.

3.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
4.0 AV:L/AC:L/AT:N/PR:L/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N

Primary rating from Vendor (Tanium).

CVSS VectorVendor: Tanium

Attack Vector
Local
Attack Complexity
Low
Privileges Required
Low
User Interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

Lifecycle Timeline

2
Patch available
Oct 27, 2026 - 18:18 EUVD
CVE Published
Oct 27, 2026 - 17:35 cve.org
HIGH 7.8

DescriptionCVE.org

Tanium addressed a local privilege escalation vulnerability in End-User Notifications.

Executive ViewAI

Why It Matters

CVE-2026-108306 is a high-severity local privilege escalation vulnerability in Tanium End-User CX and the Tanium Endpoint Configuration Toolset Solution that allows an authenticated low-privilege user to gain high-impact control over the affected endpoint. Because Tanium agents are widely deployed across enterprise environments, any successful exploitation could undermine endpoint integrity and potentially enable broader lateral movement, making timely remediation a governance priority for security leadership.

Business Impact: High
Compensating Controls

Apply vendor patch.

Threat Intelligence Overview

EPSS Score
0.1%
Top 97% exploitable
Prevalence
Medium
enterprise endpoint-management platform, common in large orgs, not universal
Social Media
1
Sightings
Data Quality
3 sources
Confidence: Low

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity HIGH
CISA KEV No
Public POC No
EPSS 0.1%
Patch available Yes
Active threat No
Deciding rule
HIGH severity (CVSS 7.0-8.9)
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision· derived
Defer
Exploitation· derived
None
System Exposure· derived
Small
Automatable· derived
No
Human Impact
High

Priority Score

39
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +39
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

Privilege escalation occurs when an attacker leverages flaws in access control mechanisms to gain permissions beyond what they were originally granted.

More in Tanium

View all
CVE-2026-86865 HIGH POC
7.2 Sep 16

SQL injection in the Tanium Asset module lets an authenticated, high-privilege user read and modify data in the underlyi

CVE-2026-9208 HIGH
8.8 May 27

Unauthorized OS command execution in Tanium Connect allows an attacker holding low-privilege authenticated access to run

CVE-2026-9207 HIGH
8.8 May 27

OS command injection in Tanium Connect lets an authenticated, low-privileged user execute arbitrary commands on the unde

CVE-2025-15330 HIGH
8.8 Feb 05

Tanium addressed an improper input validation vulnerability in Deploy. [CVSS 8.8 HIGH]

CVE-2026-108303 HIGH
8.8 Oct 27

Command injection in Tanium Certificate Manager allows an authenticated attacker with low-level access to execute unauth

CVE-2026-108329 HIGH
8.8 Oct 27

Command injection in Tanium Threat Response allows an authenticated low-privilege attacker to execute unauthorized code

CVE-2026-87105 HIGH
8.8 Sep 16

SQL injection in Tanium Threat Response (CVSS 3.1 base score 8.8, AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H) allows a low-priv

CVE-2026-87023 HIGH
8.5 Sep 09

Path traversal in Tanium Comply allows authenticated low-privileged network users to read files outside the module's int

CVE-2026-87030 HIGH
8.5 Sep 09

Path traversal in Tanium Comply exposes all authenticated low-privilege users to a scope-changing arbitrary file write a

CVE-2026-87034 HIGH
8.3 Sep 09

SQL injection in Tanium Comply (CWE-89) allows a network-accessible, unauthenticated attacker - contingent on user inter

CVE-2026-87036 HIGH
8.1 Sep 09

Improper access controls (CWE-862, Missing Authorization) in Tanium Comply allow an authenticated low-privileged user to

CVE-2026-87075 HIGH
8.1 Sep 09

Improper access controls in Tanium Comply allow an authenticated low-privilege user to perform unauthorized operations w

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy